I'm feeling that I did it to myself again, but I've not found the
source of this problem.  Clues would be appreciated.

On may 10th I did a bulk build and all was well.   Just a few hours
ago on the 12th I started up another, as I wanted to see the new
version of webkit.

The build started off OK, (a hyperthreaded 4 core system with a
SSD), but after 10 minutes I had 10+ programs that didn't compile.
Their common problem is this:

(compiling devel/uuid)
Checking if your kit is complete...
Looks good
Warning: -L../.libs changed to -L/usr/ports/pobj/uuid-1.6.2/uuid-1.6.2/perl/../.libs
Warning: -L.. changed to -L/usr/ports/pobj/uuid-1.6.2/uuid-1.6.2/perl/..
Writing Makefile for OSSP::uuid
Makefile out-of-date with respect to /usr/libdata/perl5/i386-openbsd/5.12.2/CORE/config.h
Cleaning current config before rebuilding Makefile...
make -f Makefile.old clean > /dev/null 2>&1
/usr/bin/perl Makefile.PL "PREFIX=/usr/local"
Checking if your kit is complete...
Looks good
Warning: -L../.libs changed to -L/usr/ports/pobj/uuid-1.6.2/uuid-1.6.2/perl/../.libs
Warning: -L.. changed to -L/usr/ports/pobj/uuid-1.6.2/uuid-1.6.2/perl/..
Writing Makefile for OSSP::uuid
==> Your Makefile has been rebuilt. <==
==> Please rerun the make command. <==
false
*** Error code 1

This is a i386-current system compiled on
OpenBSD 4.9-current (GENERIC.MP) #2: Wed May 11 23:51:21 EDT 2011

What I'm looking for is a clue stick on where to look.

Thanks......

--STeve Andre'

dmesg

OpenBSD 4.9-current (GENERIC.MP) #2: Wed May 11 23:51:21 EDT 2011
    root@sata6:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
real mem  = 3209781248 (3061MB)
avail mem = 3147108352 (3001MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/20/10, SMBIOS rev. 2.7 @ 0xead50 (20 entries)
bios0: vendor American Megatrends Inc. version "4.6.4" date 02/17/2011
bios0: BIOSTAR Group TP67B+
sata6 /usr clear
sata6 /usr cat /var/run/dmesg.boot
OpenBSD 4.9-current (GENERIC.MP) #2: Wed May 11 23:51:21 EDT 2011
    root@sata6:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
real mem  = 3209781248 (3061MB)
avail mem = 3147108352 (3001MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/20/10, SMBIOS rev. 2.7 @ 0xead50 (20 entries)
bios0: vendor American Megatrends Inc. version "4.6.4" date 02/17/2011
bios0: BIOSTAR Group TP67B+
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC SSDT MCFG HPET ASPT
acpi0: wakeup devices PS2K(S1) PS2M(S1) UAR1(S4) BR20(S1) EUSB(S4) USBE(S4) P0P1(S4) P0P2(S4) P0P3(S4) P0P4(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) PEX7(S4) SLPB(S0) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu4: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu5: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu6: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz ("GenuineIntel" 686-class) 3.42 GHz cpu7: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (P0P2)
acpiprt3 at acpi0: bus -1 (P0P3)
acpiprt4 at acpi0: bus -1 (P0P4)
acpiprt5 at acpi0: bus 2 (PEX0)
acpiprt6 at acpi0: bus 3 (PEX1)
acpiprt7 at acpi0: bus 4 (PEX2)
acpiprt8 at acpi0: bus -1 (PEX3)
acpiprt9 at acpi0: bus -1 (PEX4)
acpiprt10 at acpi0: bus -1 (PEX5)
acpiprt11 at acpi0: bus -1 (PEX6)
acpiprt12 at acpi0: bus -1 (PEX7)
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpicpu4 at acpi0: C3, C1, PSS
acpicpu5 at acpi0: C3, C1, PSS
acpicpu6 at acpi0: C3, C1, PSS
acpicpu7 at acpi0: C3, C1, PSS
acpitz0 at acpi0: critical temperature 126 degC
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xd800!
cpu0: Enhanced SpeedStep 3411 MHz: speeds: 3401, 3400, 3200, 3000, 2800, 2600, 2400, 2200, 2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
bridge mem address conflict 0xf8000000/0x2100000
bridge mem address conflict 0xd0000000/0xc000000
mem address conflict 0xfa208000/0x10
mem address conflict 0xfa207000/0x400
mem address conflict 0xfa200000/0x4000
bridge mem address conflict 0xdc100000/0x100000
bridge mem address conflict 0xfa100000/0x100000
mem address conflict 0xfa206000/0x400
mem address conflict 0xfa205000/0x800
mem address conflict 0xfa204000/0x100
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: apic 0 int 16
pci1 at ppb0 bus 1
mem address conflict 0xf8000000/0x1000000
mem address conflict 0xd0000000/0x8000000
mem address conflict 0xd8000000/0x2000000
mem address conflict 0xfa080000/0x4000
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0dc4 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product 0x0be9 rev 0xa1: apic 0 int 17
azalia0: no supported codecs
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 16
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: apic 0 int 22
azalia1: codecs: Realtek/0x0892, 0x0000/0x0000, using Realtek/0x0892
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: apic 0 int 17
pci2 at ppb1 bus 2
mem address conflict 0xdc104000/0x1000
mem address conflict 0xdc100000/0x4000
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 0 int 16, address 00:30:67:ad:d6:00
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4
ppb2 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: apic 0 int 16
pci3 at ppb2 bus 3
mem address conflict 0xfa100000/0x2000
"NEC PCIE-XHCI" rev 0x03 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 2 "Intel 82801BA Hub-to-PCI" rev 0xb5: apic 0 int 18
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 vendor "ITExpress", unknown product 0x8893 rev 0x10
pci5 at ppb4 bus 5
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 23
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel P67 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: apic 0 int 19, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, C300-CTFDDAC128M, 0002> SCSI3 0/direct fixed naa.500a075102ff0e1c
sd0: 122104MB, 512 bytes/sec, 250069680 sec total
sd1 at scsibus0 targ 2 lun 0: <ATA, Hitachi HDS5C303, MEAO> SCSI3 0/direct fixed naa.5000cca228c05e05
sd1: 2861588MB, 512 bytes/sec, 5860533168 sec total
sd2 at scsibus0 targ 4 lun 0: <ATA, OCZ-VERTEX3, 2.02> SCSI3 0/direct fixed naa.5e83a97f297a96eb
sd2: 114473MB, 512 bytes/sec, 234441648 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel product 0x0024" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 7 configuration 1 interface 0 "DELL DELL USB Keyboard" rev 1.10/1.04 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 8 configuration 1 interface 0 "Dell Dell USB Mouse" rev 1.10/29.10 addr 4
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b



Reply via email to