Hello!
I use symon-mon-2.79p2 on an Apple Mac mini (dmesg below), and since a
few days (snapshots from April 21 and April 25) symon doesn't
recognise the temperature sensor cpu0.temp0 anymore (the only sensor
on that machine). With the snapshot from April 12 and the same
configuration it worked fine. When starting with -d I get now:
# /usr/local/libexec/symon -d
symon version 2.79
program id=30105
debug: symon packet size=727
sending packets to udp 192.168.1.4 2100
started module io(wd0)
started module io(cd0)
started module if(ath0)
started module if(msk0)
started module proc(httpd)
fatal: sensor(cpu0.temp0): device not found: cpu0
All other modules work fine when I comment out the sensor(cpu0.temp0)
entry in the configuration. I saw a post regarding recent work on
sensor related kernel code, and maybe this problem is related to
changes in the kernel?
I'll be happy to test any patches.
Tas.
OpenBSD 4.7-current (GENERIC.MP) #554: Sun Apr 25 02:17:12 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM
real mem = 2114367488 (2016MB)
avail mem = 2037600256 (1943MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @
0xe73f0 (39 entries)
bios0: vendor Apple Computer, Inc. version
"MM11.88Z.0055.B08.0610121326" date 10/12/06
bios0: Apple Computer, Inc. Macmini1,1
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT
acpi0: wakeup devices PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) USB3(S3)
USB4(S3) USB7(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU 1400 @ 1.83GHz ("GenuineIntel" 686-class) 1.84 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (PCIB)
acpiec0 at acpi0: Failed to register address space
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: VGA_
acpivout1 at acpivideo0: TV__
bios0: ROM list: 0xc0000/0xe600!
cpu0: Enhanced SpeedStep 1834 MHz: speeds: 1833, 1667, 1500, 1333, 1000 MHz
memory map conflict 0xe00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xfffb0000/0x30000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and
Frequency, rev 0x03) at pci0 dev 7 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 1 int 22 (irq 11)
azalia0: codecs: Sigmatel STAC9220/1
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1
int 17 (irq 11)
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22,
Yukon-2 EC rev. A3 (0x2): apic 1 int 16 (irq 11)
msk0 at mskc0 port A: address 00:16:cb:a7:46:69
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1
int 16 (irq 10)
pci2 at ppb1 bus 2
ath0 at pci2 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 17 (irq 11)
ath0: AR5424 10.3 phy 6.1 rf 10.2, WORAW, address 00:17:f2:4d:19:ee
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
int 21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1
int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1
int 21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
"AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-R UJ-846, FM3J> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <FUJITSU MHV2080BHPL>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
1 int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Apple Computer
ADB device" rev 2.00/19.65 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Apple Computer
ADB device" rev 2.00/19.65 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons
wsmouse0 at ums0 mux 0
uhidev2 at uhub4 port 2 configuration 1 interface 0 "Apple Computer,
Inc. IR Receiver" rev 2.00/1.10 addr 3
uhidev2: iclass 3/0, 38 report ids
uhid0 at uhidev2 reportid 36: input=4, output=0, feature=0
uhid1 at uhidev2 reportid 37: input=4, output=0, feature=0
uhid2 at uhidev2 reportid 38: input=4, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
