After upgrading to the latest -current as of Dec 9, I no longer have any
control of sound output except within mplayer.
This makes it impossible to listen to a list of mp3s (or whatever)
without ear grindingly loud output. As soon as next file starts, output
cranks back up to default level, which is excessive.
Mixerctl has no effect at all. Not even mute works.
OpenBSD 4.6-current (GENERIC) #450: Wed Dec 9 16:09:40 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2 cache) 899 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536375296 (511MB)
avail mem = 511082496 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/19/01, BIOS32 rev. 0 @ 0xfb0c0,
SMBIOS rev. 2.3 @ 0xf0800 (38 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
12/19/2001
bios0: LEGEND.QDI(R) SynactiX5EP
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb540
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x4000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x2400000
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9500/9700" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 5
drm0 at radeondrm0
"ATI Radeon 9500/9700 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x05
pci2 at ppb1 bus 2
ppb2 at pci2 dev 11 function 0 "IBM 82351 PCI-PCI" rev 0x01
pci3 at ppb2 bus 3
tl0 at pci3 dev 0 function 0 "Compaq DP Netelligent 10/100TX" rev 0x10:
irq 11 address 00:08:c7:5d:a2:8f
nsphy0 at tl0 phy 1: DP83840 10/100 PHY, rev. 1
ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface, rev. 5: OUI
0x100014, model 0x0001
tl1 at pci3 dev 1 function 0 "Compaq DP Netelligent 10/100TX" rev 0x10:
irq 12 address 00:08:c7:5d:a2:0f
nsphy1 at tl1 phy 1: DP83840 10/100 PHY, rev. 1
ukphy1 at tl1 phy 31: Generic IEEE 802.3u media interface, rev. 5: OUI
0x100014, model 0x0001
emu0 at pci2 dev 14 function 0 "Creative Labs SoundBlaster Audigy" rev
0x04: irq 9
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Audigy Digital" rev 0x04 at pci2 dev 14
function 1 not configured
"Creative Labs Firewire" rev 0x04 at pci2 dev 14 function 2 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x05: 24-bit
timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x05: DMA,
channel 0 wired to compatibility, channel 1 wired to com
patibility
wd0 at pciide0 channel 0 drive 0: <ST3200822A>
wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 90430D3>
wd1: 16-sector PIO, LBA, 4112MB, 8421840 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <BENQ, DVD DD DW1640, BSRB> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x05: irq 11
uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x05: irq 11
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x18
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
biomask ed65 netmask fd65 ttymask fdff
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 2
uhub3 at uhub2 port 4 "Genesys Logic USB2.0 Hub" rev 2.00/7.02 addr 3
umass0 at uhub3 port 3 configuration 1 interface 0 " USB Reader" rev
2.00/1.02 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0
0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB MS Reader, 1.03> SCSI0
0/direct removable
sd1: drive offline
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 1.10/25.00 addr 5
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
Thanks
Chris Bennett
--
A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects.
-- Robert Heinlein
