On Wed, Dec 10, 2008 at 07:55:59AM +0100, Andreas Bartelt wrote:
> Hello,
>
> I've updated my systems to CURRENT on Dec, 7th. Since then, I'm
> experiencing problems with mplayer audio and video playback on one of my
> boxes (audio and video stutters about every 5 seconds). Could this be
> caused by the libsndio related changes which have been committed to the
> mplayer port about one month ago?
could be. try 'mplayer -ao sun <file>' to force mplayer to use the
audio(4) backend and see if there is any change.
>
> regards,
> Andreas
> OpenBSD 4.4-current (GENERIC.MP) #0: Sun Dec 7 15:34:03 CET 2008
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz ("GenuineIntel" 686-class)
> 3.17 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> real mem = 2146459648 (2047MB)
> avail mem = 2067214336 (1971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 11/04/08, BIOS32 rev. 0 @ 0xf0010,
> SMBIOS rev. 2.5 @ 0xf0720 (70 entries)
> bios0: vendor American Megatrends Inc. version "1501" date 11/04/2008
> bios0: ASUSTeK Computer INC. P5Q
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR
> acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4)
> EUSB(S4) USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4)
> USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) P0P4(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: unknown i686 EBL_CR_POWERON value 3 (0x424c0000)
> cpu0: apic clock running at 333MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz ("GenuineIntel" 686-class)
> 3.17 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P2)
> acpiprt2 at acpi0: bus -1 (P0P3)
> acpiprt3 at acpi0: bus 2 (P0P1)
> acpiprt4 at acpi0: bus -1 (P0P5)
> acpiprt5 at acpi0: bus -1 (P0P6)
> acpiprt6 at acpi0: bus -1 (P0P7)
> acpiprt7 at acpi0: bus -1 (P0P8)
> acpiprt8 at acpi0: bus -1 (P0P9)
> acpiprt9 at acpi0: bus -1 (P0P4)
> acpicpu0 at acpi0
> acpicpu1 at acpi0
> acpibtn0 at acpi0: PWRB
> bios0: ROM list: 0xc0000/0xd000
> cpu0: EST: unknown system bus clock
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x02: apic 2 int 16 (irq
> 10)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> radeondrm0 at vga1
> drm0 at radeondrm0
> "ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 16
> (irq 10)
> uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 21
> (irq 15)
> uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 18
> (irq 5)
> ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 18
> (irq 5)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 2 int 23
> (irq 14)
> uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 2 int 19
> (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 2 int 18
> (irq 5)
> ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 2 int 23
> (irq 14)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
> pci2 at ppb1 bus 2
> emu0 at pci2 dev 1 function 0 "Creative Labs SoundBlaster Live" rev 0x08:
> apic 2 int 17 (irq 3)
> ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
> audio0 at emu0
> "Creative Labs PCI Gameport Joystick" rev 0x08 at pci2 dev 1 function 1 not
> configured
> re0 at pci2 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169S (0x0400), apic
> 2 int 18 (irq 5), address 00:1e:2a:bd:fe:20
> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
> pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
> ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: apic 2 int 19
> (irq 11), AHCI 1.2
> scsibus0 at ahci0: 32 targets, initiator 32
> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD1001FALS-0, 05.0> SCSI3 0/direct
> fixed
> sd0: 953869MB, 512 bytes/sec, 1953525168 sec total
> sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD1001FALS-0, 05.0> SCSI3 0/direct
> fixed
> sd1: 953869MB, 512 bytes/sec, 1953525168 sec total
> cd0 at scsibus0 targ 2 lun 0: <HL-DT-ST, DVDRAM GH20NS15, IL00> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic 2 int
> 18 (irq 5)
> iic0 at ichiic0
> iic0: addr 0x1e 01=01 02=01 10=0f 11=01 12=01 13=0f 20=05 21=01 22=01 23=05
> 31=01 32=01 words 00=0001 01=0101 02=0100 03=0000 04=0000 05=0000 06=0000
> 07=0000
> iic0: addr 0x20 01=80 02=17 03=7f 10=00 19=b0 20=20 21=00 25=20 26=b2 38=74
> 39=03 4a=64 6a=2c 78=02 79=08 7a=00 7b=00 7e=82 80=00 8b=41 8c=b2 96=3a 99=41
> 9a=98 9b=01 d0=00 d1=03 d2=72 d3=72 d4=03 d5=02 d6=01 d7=6a d8=64 d9=00 da=00
> db=00 dc=00 dd=00 de=00 df=19 e0=00 e1=00 e2=10 e3=10 e4=10 e5=10 e6=10 e7=10
> e8=10 e9=10 ea=10 ec=07 ee=00 f1=0d f5=02 f6=02 f9=00 fa=00 fb=50 words
> 00=ffff 01=8037 02=1766 03=7fff 04=ffff 05=ffff 06=ffff 07=ffff
> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lm0 at isa0 port 0x290/8: W83627DHG
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/20.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> cpu1: unknown i686 EBL_CR_POWERON value 3 (0x424c0000)
> radeondrm0: Setting GART location based on new memory map
> radeondrm0: Loading R300 Microcode
> radeondrm0: writeback test succeeded in 1 usecs
--
[EMAIL PROTECTED]
SDF Public Access UNIX System - http://sdf.lonestar.org
