I just built audacity from ports (v1.3.3) on a recent snapshot.
Audio works on my system with media players, but audacity doesn't produce any
sound. I can edit a waveform, and I don't get any errors; it simply doesn't
make any sound. It is set to use /dev/audio, which appears to be right. Any
insight is appreciated. dmesg follows:
OpenBSD 4.2-current (GENERIC) #515: Tue Nov 13 14:07:23 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class, 512KB L2
cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD errata 86, 89, 97, 104 present, BIOS upgrade may be required
real mem = 1073246208 (1023MB)
avail mem = 1029971968 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/01/05, BIOS32 rev. 0 @ 0xfb460, SMBIOS
rev. 2.3 @ 0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 06/01/2005
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7142
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdba4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdb00/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8M800 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8M800 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M800 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M800 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M800 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA K8M800 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
eap0 at pci0 dev 9 function 0 "Ensoniq CT5880" rev 0x02: irq 11
eap0: eap1371_read_codec timeout 2
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
ppb1 at pci0 dev 10 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
fxp0 at pci2 dev 4 function 0 "Intel 8255x" rev 0x05, i82558: irq 10, address
00:08:c7:ea:b9:e1
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
fxp1 at pci2 dev 5 function 0 "Intel 8255x" rev 0x05, i82558: irq 5, address
00:08:c7:ea:b9:e2
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, chann
el 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <WDC WD2500JB-00REA0>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, CD-R PX-W1210A, 1.08> SCSI0 5/cdrom
removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=02 01=0f 02=00 03=01 04=07 05=00 06=18 07=00 08=00 14=14
15=62 16=02 17=05 words 00=02ff 01=0fff
02=00ff 03=01ff 04=07ff 05=00ff 06=18ff 07=00ff 08=00ff 09=ffff 0a=ffff
0b=ffff 0c=ffff 0d=ffff 0e=ffff 0f=ffff
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM ECC PC3200CL3.0
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff45 netmask ff65 ttymask ffe7
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/20.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
