hi, the problem seems to be solved only on the first screen. But when you start using mitmproxy the logs come back in console. I saw that another post on the subject has passed but it seems to me that the py3-passlib packages have not been updated. I only use the system packages because I find the ports inconvenient and sometimes buggy. In addition to the fact that it often takes a lot of time to compile. Another thing I noticed is the non-functioning of the variables:
MITMPROXY_SSLKEYLOGFILE SSLKEYLOGFILE here is some doc: https://docs.mitmproxy.org/stable/howto/wireshark-tls/ these variables are used to export the encryption keys that can be used on wireshark. In the meantime instead of using mitmproxy I used mitmdump which I think should also support the variables and apparently they do not work. Thanks for everything. Il giorno mer 30 apr 2025 alle ore 13:56 Kirill A. Korinsky < kir...@korins.ky> ha scritto: > On Wed, 30 Apr 2025 12:53:21 +0200, > Stuart Henderson <s...@spacehopper.org> wrote: > > > > On 2025/04/30 12:24, Kirill A. Korinsky wrote: > > > On Wed, 30 Apr 2025 01:04:16 +0200, > > > LWS <mediome...@gmail.com> wrote: > > > > > > > > hello, > > > > i hope this is the correct mailing list. > > > > i installed mitmproxy on an openbsd virtual machine on vmm, then i > updated > > > > both the vm and the host to openbsd 7.7. > > > > i have a problem with mitmproxy because when i launch it on the > terminal in > > > > ssh i don't get the gui interface but a whole series of debug > messages that > > > > make the software unusable. > > > > i tried several things to remove these messages and they are the > following: > > > > > > > > # mitmproxy --quiet > > > > # mitmproxy -v > > > > # mitmproxy --set verbosity=warn > > > > # mitmproxy -n --quiet > > > > # mitmproxy --quiet --set verbosity=warn > > > > > > > > without getting any results. > > > > i uploaded a screenshot to the following url. The screenshot is made > on the > > > > vm console but in ssh it is the same thing. As you can see, it's not > that > > > > the program doesn't work.. as you can see the exit confirmation > message by > > > > pressing the q key but only that the debug messages appear. > > > > I also opened a discussion in the discussion section on the github > page of > > > > the software. > > > > screen --> https://ibb.co/zhfBvLrR > > > > Thanks for any help. > > > > > > Yes, this is the right list and thanks for a bug report! > > > > > > I usually use only mitmweb and it was a reason why it wasn't noticed. > > > > > > The good news that this issue was fixed in version 12.0.0 which was > released > > > yesterday, and I plan to send a diff to update it in -current later > today. > > > > > > Anyway, here a backport of the fix for 7.7. > > > > > > Ok for -stable? > > > > Please commit to -current first (then update on top), -current can't be > > "behind" -stable. > > > > > Index: security/mitmproxy/Makefile > > > =================================================================== > > > RCS file: /cvs/ports/security/mitmproxy/Makefile,v > > > diff -u -p -r1.9 Makefile > > > --- security/mitmproxy/Makefile 26 Feb 2025 19:31:11 -0000 1.9 > > > +++ security/mitmproxy/Makefile 30 Apr 2025 10:24:29 -0000 > > > @@ -1,6 +1,7 @@ > > > COMMENT = interactive intercepting HTTP proxy > > > > > > MODPY_DISTV = 11.1.3 > > > +REVISION = 0 > > > > > > DISTNAME = mitmproxy-${MODPY_DISTV} > > > > > > Index: > security/mitmproxy/patches/patch-mitmproxy_tools_console_window_py > > > =================================================================== > > > RCS file: > security/mitmproxy/patches/patch-mitmproxy_tools_console_window_py > > > diff -N > security/mitmproxy/patches/patch-mitmproxy_tools_console_window_py > > > --- /dev/null 1 Jan 1970 00:00:00 -0000 > > > +++ > security/mitmproxy/patches/patch-mitmproxy_tools_console_window_py 30 > Apr 2025 10:24:29 -0000 > > > @@ -0,0 +1,21 @@ > > > +Backport: https://github.com/mitmproxy/mitmproxy/pull/7676 > > > > Since it was actually committed, please refer to the commit rather > > than the PR (and since there are other files touched, probably "part of > > commit .." would be best) > > > > otherwise ok > > > > Thanks, commited to -current and after that into -stable. > > > > @@ -0,0 +1,13 @@ > > > +Backport: https://github.com/mitmproxy/mitmproxy/pull/7676 > > > + > > > +Index: mitmproxy/tools/main.py > > > +--- mitmproxy/tools/main.py.orig > > > ++++ mitmproxy/tools/main.py > > > +@@ -58,6 +58,7 @@ def run( > > > + logging.getLogger("tornado").setLevel(logging.WARNING) > > > + logging.getLogger("asyncio").setLevel(logging.WARNING) > > > + logging.getLogger("hpack").setLevel(logging.WARNING) > > > ++ logging.getLogger("urwid").setLevel(logging.INFO) > > > + logging.getLogger("quic").setLevel( > > > + logging.WARNING > > > + ) # aioquic uses a different prefix... > > > > > > > > > -- > > > wbr, Kirill > > > > > > > -- > wbr, Kirill >
