On Mon, Sep 24, 2007 at 10:21:40AM +0200, Andreas Bihlmaier wrote: > Hello ports@, > > here is a resubmitt of gerbv. > > pkg_info gerbv > Information for inst:gerbv-1.0.2 > > Comment: > viewer for Gerber (RS-274X) files > > Description: > Gerber Viewer (gerbv) is a viewer for Gerber files. Gerber files are generated > from PCB CAD system and sent to PCB manufacturers as basis for the > manufacturing > process. The standard supported by gerbv is RS-274X. The basic difference > between RS-274D (the old standard) and RS-274X is basically the addition of > apertures in RS-274X. It might be possible to make an RS-274X file out of an > RS-274D file and an aperture list. > > gerbv also supports drill files. The format supported are known under names as > NC-drill or Excellon. The format is a bit undefined and different EDA-vendors > implement it different. But basically you need to have the tools definition in > the file, then the parser is quite tolerant. The different holes are shown as > dots in the (scaled) correct size. > > Maintainer: Andreas Bihlmaier <[EMAIL PROTECTED]> > > WWW: http://gerbv.sourceforge.net/ > > > Works on i386 and sparc64. >
Shouldn't it be installed to cad/ (plus the CATEGORIES set to cad)? At least I think it is more CAD related then graphics. -- :wq Claudio
