Works like a charm. No issues. I migrated first of two of my OpenBSD machines with zigbee2mqtt to Stuart's port. I will migrate second machine later this week, but based on what I see here I don't expect issues as machine's setup is basically identical.
On Tue, Nov 26, 2024 at 03:57:45PM +0000, Stuart Henderson wrote: > On 2024/11/26 15:56, Stuart Henderson wrote: > > Attached. This sees my zzh ok and things look good - I don't have any > > devices handy that I can hook up to it to test at the moment (I don't > > really want to start taking my ikea setup to pieces just to test ;) > > Actually attached this time ;) > > > : zigbee2mqtt allows you to use your Zigbee devices without the vendor's > > : bridge or gateway. > > : > > : It bridges events and allows you to control your Zigbee devices via > > : MQTT. In this way you can integrate your Zigbee devices with whatever > > : smart home infrastructure you are using. > > : > > : To use it, you will need suitable Zigbee bridge hardware (typically > > : USB-based), Zigbee devices, and an MQTT server (for example, mosquitto). > > : > > : zigbee2mqtt has mature support for adapters based on TI zStack, SiLabs > > : EmberZNet, and Dresden Elektronik deCONZ. It has experimental support > > : for some others. Most of these are USB devices presenting as a serial > > : UART (/dev/cuaU*) when running the correct firmware - it has some > > : support for network-based (wifi/ethernet) devices. > > > > tgz attached, user.list diff inline. > > > > Probably of more interest to many porters than the actual software > > itself is the npm handling in the port. It's a multi stage thing - > > > > 1. fetch deps online using npm and prepare a tar of the node_cache > > directory to be uploaded. the "make dist" target does this (largely > > based on what I do in the PHP-based librenms but adapted for npm > > vs composer). > > > > 2. in post-extract (i.e. *before* patching), use npm (pointed at > > the local cache, so network is not needed) to extract. > > > > 3. a build phase is needed for zigbee2mqtt, it converts some > > TypeScript code to js. again this is pointed at the cache. > > > > 4. do-install does a "global" install pointed to the fake-install > > dir (and again the cache, this one was fun to find out as otherwise > > npm would just sit there updating the spinner if network access was > > blocked...). this means that only the end result is packaged, the > > build-only deps are not (181/64M dirs in node_modules in fake, vs > > 407 dirs/170M during build). > > > > (Plus a bit of fiddling so that config goes under /etc, logs under > > /var/log, data under /var/db). > > > > Any test reports or OKs to import? > > > > > > Index: user.list > > =================================================================== > > RCS file: /cvs/ports/infrastructure/db/user.list,v > > diff -u -p -r1.453 user.list > > --- user.list 25 Nov 2024 08:29:28 -0000 1.453 > > +++ user.list 26 Nov 2024 15:41:38 -0000 > > @@ -408,3 +408,4 @@ id user group port > > 897 _croc _croc sysutils/croc > > 898 _icingadb _icingadb net/icinga/icingadb > > 899 _openhab _openhab misc/openhab > > +900 _z2m _z2m comms/zigbee2mqtt -- Regards, Mikolaj
