Hello,
Here is an update for devel/makeesparduino, to 6.5.0. This update is a
major redo of the original makefile, which includes support for OpenBSD,
which gets rid of local patching.
This update does not need to wait for the xtensa-lx106-elf and has been
tested on amd64 and sparc64. This has only been tested on amd64 for
xtensa-esp32-elf.
Also, the MESSAGE file has been edited to inform the user of the
requirement of a LOCALBASE environment setting.
Ok?
--
Tracey Emery
diff c909a65b2d2d0588e08c36b096953a7d9819aa2e
/home/tracey/port_updates/makeesparduino
blob - 49770a3cfba52343f8f634a89bb9cfebcf71531f
file + Makefile
--- Makefile
+++ Makefile
@@ -4,7 +4,7 @@ COMMENT = makefile for ESP8266 and ESP32 Arduino
proj
GH_ACCOUNT = plerup
GH_PROJECT = makeEspArduino
-GH_TAGNAME = 5.0.2
+GH_TAGNAME = 6.5.0
PKGNAME = makeesparduino-${GH_TAGNAME}
@@ -15,18 +15,22 @@ MAINTAINER = Tracey Emery
<tra...@openbsd.org>
#LGPLv2.1
PERMIT_PACKAGE = Yes
+MODULES = lang/python
+
RUN_DEPENDS += devel/arduino \
devel/gmake
NO_TEST = Yes
NO_BUILD = Yes
-post-patch:
- ${SUBST_CMD} ${WRKDIST}/makeEspArduino.mk
-
do-install:
${INSTALL_DATA_DIR} ${PREFIX}/share/makeEspArduino
cp -r ${WRKDIST}/*.mk ${PREFIX}/share/makeEspArduino/
+ cp -r ${WRKDIST}/os ${PREFIX}/share/makeEspArduino/
cp -r ${WRKDIST}/tools ${PREFIX}/share/makeEspArduino/
+post-install:
+ ${MODPY_BIN} ${MODPY_LIBDIR}/compileall.py \
+ ${PREFIX}/share/makeEspArduino/tools
+
.include <bsd.port.mk>
blob - 8b19b44d19e8d93a1018250b08c9426343c7a949
file + distinfo
--- distinfo
+++ distinfo
@@ -1,2 +1,2 @@
-SHA256 (makeEspArduino-5.0.2.tar.gz) =
Xm/HwKIToQ2zJxLkSOvSNJh9jUkAf2MQqD0WCGCAdYk=
-SIZE (makeEspArduino-5.0.2.tar.gz) = 25007
+SHA256 (makeEspArduino-6.5.0.tar.gz) =
OaCqXL0sCd+S75nSwIfixKLMF+L3FisEGX5pRY4Nk58=
+SIZE (makeEspArduino-6.5.0.tar.gz) = 31191
blob - a70019af2e2d7511a5691eab18ed54eac854a288
file + /dev/null
--- patches/patch-makeEspArduino_mk
+++ /dev/null
@@ -1,96 +0,0 @@
-$OpenBSD: patch-makeEspArduino_mk,v 1.2 2020/05/18 22:11:43 tracey Exp $
-
-Index: makeEspArduino.mk
---- makeEspArduino.mk.orig
-+++ makeEspArduino.mk
-@@ -26,8 +26,13 @@ __TOOLS_DIR := $(dir $(__THIS_FILE))tools
- CHIP ?= esp8266
-
- # Serial flashing parameters
--UPLOAD_PORT ?= $(shell ls -1tr /dev/tty*USB* 2>/dev/null | tail -1)
--UPLOAD_PORT := $(if $(UPLOAD_PORT),$(UPLOAD_PORT),/dev/ttyS0)
-+ifeq ($(OS), OpenBSD)
-+ UPLOAD_PORT ?= $(shell ls -1tr /dev/tty*U* 2>/dev/null | tail -1)
-+ UPLOAD_PORT := $(if $(UPLOAD_PORT),$(UPLOAD_PORT),/dev/ttyU0)
-+else
-+ UPLOAD_PORT ?= $(shell ls -1tr /dev/tty*USB* 2>/dev/null | tail -1)
-+ UPLOAD_PORT := $(if $(UPLOAD_PORT),$(UPLOAD_PORT),/dev/ttyS0)
-+endif
-
- # OTA parameters
- OTA_ADDR ?=
-@@ -57,7 +62,7 @@ FS_REST_DIR ?= $(BUILD_DIR)/file_system
-
- # Bootloader
- BOOT_LOADER ?= $(ESP_ROOT)/bootloaders/eboot/eboot.elf
--
-+#XXX: HERE
-
#====================================================================================
- # Standard build logic and values
-
#====================================================================================
-@@ -70,6 +75,8 @@ git_description = $(shell git -C $(1) describe --tags
- time_string = $(shell date +$(1))
- ifeq ($(OS), Darwin)
- find_files = $(shell find -E $2 -regex ".*\.($1)" | sed 's/\/\//\//')
-+else ifeq ($(OS), OpenBSD)
-+ find_files = $(shell find $2 | awk '/.*\.($1)/')
- else
- find_files = $(shell find $2 -regextype posix-egrep -regex ".*\.($1)")
- endif
-@@ -81,20 +88,33 @@ ifndef ESP_ROOT
- ARDUINO_ROOT = $(shell cygpath -m $(LOCALAPPDATA)/Arduino15)
- else ifeq ($(OS), Darwin)
- ARDUINO_ROOT = $(HOME)/Library/Arduino15
-+ else ifeq ($(OS), OpenBSD)
-+ ARDUINO_ROOT = ${LOCALBASE}/share/arduino
- else
- ARDUINO_ROOT = $(HOME)/.arduino15
- endif
- ARDUINO_ESP_ROOT = $(ARDUINO_ROOT)/packages/$(CHIP)
-- ESP_ROOT := $(lastword $(wildcard $(ARDUINO_ESP_ROOT)/hardware/$(CHIP)/*))
-+ ifeq ($(OS), OpenBSD)
-+ ESP_ROOT = $(ARDUINO_ROOT)/hardware/espressif/$(CHIP)
-+ ARDUINO_LIBS = ${LOCALBASE}/share/arduino/libraries
-+ else
-+ ESP_ROOT := $(lastword $(wildcard $(ARDUINO_ESP_ROOT)/hardware/$(CHIP)/*))
-+ ARDUINO_LIBS = $(shell grep -o "sketchbook.path=.*"
$(ARDUINO_ROOT)/preferences.txt 2>/dev/null | cut -f2- -d=)/libraries
-+ endif
- ifeq ($(ESP_ROOT),)
- $(error No installed version of $(CHIP) Arduino found)
- endif
-- ARDUINO_LIBS = $(shell grep -o "sketchbook.path=.*"
$(ARDUINO_ROOT)/preferences.txt 2>/dev/null | cut -f2- -d=)/libraries
- ESP_ARDUINO_VERSION := $(notdir $(ESP_ROOT))
- # Find used version of compiler and tools
-- COMP_PATH := $(lastword $(wildcard $(ARDUINO_ESP_ROOT)/tools/xtensa-*/*))
-- ESPTOOL_PATH := $(lastword $(wildcard $(ARDUINO_ESP_ROOT)/tools/esptool*/*))
-- MKSPIFFS_PATH := $(lastword $(wildcard
$(ARDUINO_ESP_ROOT)/tools/mkspiffs/*/*))
-+ ifeq ($(OS), OpenBSD)
-+ COMP_PATH := ${LOCALBASE}/bin
-+ ESPTOOL_PATH := ${LOCALBASE}/bin
-+ MKSPIFFS_PATH := ${LOCALBASE}/bin
-+ else
-+ COMP_PATH := $(lastword $(wildcard $(ARDUINO_ESP_ROOT)/tools/xtensa-*/*))
-+ ESPTOOL_PATH := $(lastword $(wildcard
$(ARDUINO_ESP_ROOT)/tools/esptool*/*))
-+ MKSPIFFS_PATH := $(lastword $(wildcard
$(ARDUINO_ESP_ROOT)/tools/mkspiffs/*/*))
-+ endif
- else
- # Location defined, assume it is a git clone
- ESP_ARDUINO_VERSION = $(call git_description,$(ESP_ROOT))
-@@ -215,6 +235,8 @@ LWIP_VARIANT ?= $(shell $(BOARD_OP) $(BOARD) first_lwi
- # Handle possible changed state i.e. make command line parameters or changed
git versions
- ifeq ($(OS), Darwin)
- CMD_LINE := $(shell ps $$PPID -o command | tail -1)
-+else ifeq ($(OS), OpenBSD)
-+ CMD_LINE := $(shell ps $$PPID -o command | tail -1)
- else
- CMD_LINE := $(shell tr "\0" " " </proc/$$PPID/cmdline)
- endif
-@@ -515,6 +537,8 @@ DEFAULT_GOAL ?= all
- # Build threads, default is using all cpus
- ifeq ($(OS), Darwin)
- BUILD_THREADS ?= $(shell sysctl -n hw.ncpu)
-+else ifeq ($(OS), OpenBSD)
-+ BUILD_THREADS ?= $(shell sysctl -n hw.ncpuonline)
- else
- BUILD_THREADS ?= $(shell nproc)
- endif
blob - 31e60d9c4bfd8994fe897caf1de5942bb9fb6015
file + /dev/null
--- patches/patch-tools_parse_arduino_pl
+++ /dev/null
@@ -1,13 +0,0 @@
-$OpenBSD: patch-tools_parse_arduino_pl,v 1.1 2020/05/18 22:11:43 tracey Exp $
-
-Index: tools/parse_arduino.pl
---- tools/parse_arduino.pl.orig
-+++ tools/parse_arduino.pl
-@@ -22,6 +22,7 @@ my $os = shift;
- $os =~ s/Windows_NT/windows/;
- $os =~ s/Linux/linux/;
- $os =~ s/Darwin/macosx/;
-+$os =~ s/OpenBSD/openbsd/;
- my $lwipvariant = shift;
- my %vars;
-
blob - 823ecc5c1609e9b5d849d4b5b9b5af02799ba5d0
file + pkg/MESSAGE
--- pkg/MESSAGE
+++ pkg/MESSAGE
@@ -3,3 +3,8 @@ desired Espressif chipset.
If you haven't already, please use pkg_add to install arduino-esp8266,
arduino-esp32, or both.
+
+Also, the LOCALBASE path will need to be added to your environment. For
+temporary usage, do:
+
+$ env LOCALBASE=${LOCALBASE} gmake -f
${LOCALBASE}/share/makeEspArduino/makeEspArduino.mk
blob - 18c68e009c9ce1bc081f0bde07c1422a54d66ad1
file + pkg/PLIST
--- pkg/PLIST
+++ pkg/PLIST
@@ -1,9 +1,18 @@
-@comment $OpenBSD: PLIST,v 1.2 2020/05/18 22:11:43 tracey Exp $
+@comment $OpenBSD: PLIST,v$
share/makeEspArduino/
share/makeEspArduino/makeEspArduino.mk
+share/makeEspArduino/os/
+share/makeEspArduino/os/Darwin.mk
+share/makeEspArduino/os/OpenBSD.mk
+share/makeEspArduino/os/Windows_NT.mk
share/makeEspArduino/tools/
+${MODPY_COMMENT}share/makeEspArduino/tools/${MODPY_PYCACHE}/
+share/makeEspArduino/tools/${MODPY_PYCACHE}py_wrap.${MODPY_PYC_MAGIC_TAG}pyc
share/makeEspArduino/tools/board_op.pl
-share/makeEspArduino/tools/find_inc.pl
+share/makeEspArduino/tools/crash_tool.pl
+share/makeEspArduino/tools/find_src.pl
share/makeEspArduino/tools/mem_use.pl
+share/makeEspArduino/tools/obj_info.pl
share/makeEspArduino/tools/parse_arduino.pl
+share/makeEspArduino/tools/py_wrap.py
share/makeEspArduino/tools/vscode.pl
