On Tue, November 24, 2020 14:03, Dimitri Karamazov wrote:
> Hi,
>
>
> Ever since a very recent sysupgrade(after months), makehuman tends to hang.
> Even the beta version of makehuman repeats the same behaviour. But it doesn't
> really output anything for me to post here. Know that this wasn't the case
> before. Also blender-1.79 which I never
> tested before gives me a segmentation fault. I think this is a intel i915
> issue, since blender 2.90.1 which I have
> running stumbles into the same problem, it's hangs after a while. I'll post
> the dmesg for that failure. Can some test
> to see if they face the same set of problems?
>
I tried 'intel' driver which worked a little longer which failed the same way.
The time interval to failure after starting up the application reduced on
subsequents reboots.
[ 1415.106] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 1415.106] linear framebuffer access unavailable
[ 1415.125] (--) Using wscons driver on /dev/ttyC4
[ 1415.144]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 1415.144] Build Operating System: OpenBSD 6.8 amd64
[ 1415.144] Current Operating System: OpenBSD orca.iballbatonwifi.com 6.8
GENERIC.MP#188 amd64
[ 1415.144] Build Date: 20 November 2020 06:33:08PM
[ 1415.144]
[ 1415.144] Current version of pixman: 0.38.4
[ 1415.144] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1415.144] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1415.144] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 25 08:52:03
2020
[ 1415.144] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 1415.144] (==) No Layout section. Using the first Screen section.
[ 1415.144] (==) No screen section available. Using defaults.
[ 1415.144] (**) |-->Screen "Default Screen Section" (0)
[ 1415.144] (**) | |-->Monitor "<default monitor>"
[ 1415.145] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1415.145] (**) | |-->Device "intel"
[ 1415.145] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1415.145] (==) Automatically adding devices
[ 1415.145] (==) Automatically enabling devices
[ 1415.145] (==) Not automatically adding GPU devices
[ 1415.145] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1415.145] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 1415.145] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 1415.145] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 1415.145] (II) Loader magic: 0xda625626940
[ 1415.145] (II) Module ABI versions:
[ 1415.145] X.Org ANSI C Emulation: 0.4
[ 1415.145] X.Org Video Driver: 24.1
[ 1415.145] X.Org XInput driver : 24.1
[ 1415.145] X.Org Server Extension : 10.0
[ 1415.145] (--) PCI:*(0@0:2:0) 8086:3e91:1458:d000 rev 0, Mem @
0xf6000000/16777216, 0xe0000000/268435456, I/O @
0x0000f000/64
[ 1415.145] (II) LoadModule: "glx"
[ 1415.146] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 1415.147] (II) Module glx: vendor="X.Org Foundation"
[ 1415.147] compiled for 1.20.8, module version = 1.0.0
[ 1415.147] ABI class: X.Org Server Extension, version 10.0
[ 1415.147] (II) LoadModule: "intel"
[ 1415.148] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 1415.148] (II) Module intel: vendor="X.Org Foundation"
[ 1415.148] compiled for 1.20.8, module version = 2.99.916
[ 1415.148] Module class: X.Org Video Driver
[ 1415.148] ABI class: X.Org Video Driver, version 24.1
[ 1415.148] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1415.148] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 1415.148] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 1415.148] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200,
P6300
[ 1415.159] (II) intel(0): Using Kernel Mode Setting driver: i915, version
1.6.0 20200313
[ 1415.160] (WW) intel(0): Unknown chipset
[ 1415.160] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2,
avx, avx2
[ 1415.160] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 1415.160] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1415.160] (==) intel(0): RGB weight 888
[ 1415.160] (==) intel(0): Default visual is TrueColor
[ 1415.160] (II) intel(0): Output HDMI1 has no monitor section
[ 1415.160] (II) intel(0): Enabled output HDMI1
[ 1415.160] (II) intel(0): Output DP1 has no monitor section
[ 1415.160] (II) intel(0): Enabled output DP1
[ 1415.160] (II) intel(0): Output HDMI2 has no monitor section
[ 1415.160] (II) intel(0): Enabled output HDMI2
[ 1415.160] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 1415.160] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 1415.160] (II) intel(0): Enabled output VIRTUAL1
[ 1415.160] (--) intel(0): Output DP1 using initial mode 1366x768 on pipe 0
[ 1415.161] (==) intel(0): TearFree disabled
[ 1415.161] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1415.161] (==) intel(0): DPI set to (96, 96)
[ 1415.161] (II) Loading sub module "dri3"
[ 1415.161] (II) LoadModule: "dri3"
[ 1415.161] (II) Module "dri3" already built-in
[ 1415.161] (II) Loading sub module "dri2"
[ 1415.161] (II) LoadModule: "dri2"
[ 1415.161] (II) Module "dri2" already built-in
[ 1415.161] (II) Loading sub module "present"
[ 1415.161] (II) LoadModule: "present"
[ 1415.161] (II) Module "present" already built-in
[ 1415.161] (II) intel(0): SNA initialized with generic backend
[ 1415.161] (==) intel(0): Backing store enabled
[ 1415.161] (==) intel(0): Silken mouse enabled
[ 1415.161] (II) intel(0): HW Cursor enabled
[ 1415.161] (==) intel(0): DPMS enabled
[ 1415.161] (II) intel(0): Textured video not supported on this hardware
[ 1415.161] (II) intel(0): [DRI2] Setup complete
[ 1415.161] (II) intel(0): [DRI2] DRI driver: i965
[ 1415.161] (II) intel(0): [DRI2] VDPAU driver: i965
[ 1415.161] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 1415.161] (II) intel(0): hardware support for Present enabled
[ 1415.161] (II) Initializing extension Generic Event Extension
[ 1415.162] (II) Initializing extension SHAPE
[ 1415.162] (II) Initializing extension MIT-SHM
[ 1415.163] (II) Initializing extension XInputExtension
[ 1415.163] (II) Initializing extension XTEST
[ 1415.164] (II) Initializing extension BIG-REQUESTS
[ 1415.164] (II) Initializing extension SYNC
[ 1415.165] (II) Initializing extension XKEYBOARD
[ 1415.165] (II) Initializing extension XC-MISC
[ 1415.166] (II) Initializing extension SECURITY
[ 1415.166] (II) Initializing extension XFIXES
[ 1415.167] (II) Initializing extension RENDER
[ 1415.167] (II) Initializing extension RANDR
[ 1415.168] (II) Initializing extension COMPOSITE
[ 1415.168] (II) Initializing extension DAMAGE
[ 1415.169] (II) Initializing extension MIT-SCREEN-SAVER
[ 1415.169] (II) Initializing extension DOUBLE-BUFFER
[ 1415.170] (II) Initializing extension RECORD
[ 1415.170] (II) Initializing extension DPMS
[ 1415.171] (II) Initializing extension Present
[ 1415.171] (II) Initializing extension DRI3
[ 1415.172] (II) Initializing extension X-Resource
[ 1415.172] (II) Initializing extension XVideo
[ 1415.173] (II) Initializing extension XVideo-MotionCompensation
[ 1415.173] (II) Initializing extension GLX
[ 1415.185] (II) AIGLX: Loaded and initialized i965
[ 1415.185] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1415.185] (II) Initializing extension XFree86-VidModeExtension
[ 1415.185] (II) Initializing extension XFree86-DGA
[ 1415.186] (II) Initializing extension XFree86-DRI
[ 1415.186] (II) Initializing extension DRI2
[ 1415.188] (II) intel(0): switch to mode 1366x768@59.9 on DP1 using pipe 0,
position (0, 0), rotation normal,
reflection none
[ 1415.208] (II) intel(0): Setting screen physical size to 361 x 203
[ 1415.291] (II) config/wscons: checking input device /dev/wskbd
[ 1415.291] (II) wskbd: using layout us
[ 1415.291] (II) LoadModule: "kbd"
[ 1415.292] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 1415.292] (II) Module kbd: vendor="X.Org Foundation"
[ 1415.292] compiled for 1.20.8, module version = 1.9.0
[ 1415.292] Module class: X.Org XInput Driver
[ 1415.292] ABI class: X.Org XInput driver, version 24.1
[ 1415.292] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 1415.292] (**) /dev/wskbd: always reports core events
[ 1415.292] (**) /dev/wskbd: always reports core events
[ 1415.292] (**) Option "Protocol" "standard"
[ 1415.292] (**) Option "XkbRules" "base"
[ 1415.292] (**) Option "XkbModel" "pc105"
[ 1415.292] (**) Option "XkbLayout" "us"
[ 1415.292] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 1415.785] (II) config/wscons: checking input device /dev/wsmouse
[ 1415.785] (II) LoadModule: "ws"
[ 1415.786] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 1415.786] (II) Module ws: vendor="X.Org Foundation"
[ 1415.786] compiled for 1.20.8, module version = 1.3.0
[ 1415.786] Module class: X.Org XInput Driver
[ 1415.786] ABI class: X.Org XInput driver, version 24.1
[ 1415.786] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 1415.786] (**) /dev/wsmouse: always reports core events
[ 1415.786] (II) ws: /dev/wsmouse: debuglevel 0
[ 1415.786] (**) Option "Device" "/dev/wsmouse"
[ 1415.786] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 1415.786] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 1415.786] (**) ws: /dev/wsmouse: associated screen: 0
[ 1415.786] (II) ws: /dev/wsmouse: minimum x position: 0
[ 1415.786] (II) ws: /dev/wsmouse: maximum x position: 1365
[ 1415.786] (II) ws: /dev/wsmouse: minimum y position: 0
[ 1415.786] (II) ws: /dev/wsmouse: maximum y position: 767
[ 1415.786] (==) ws: /dev/wsmouse: Buttons: 7
[ 1415.787] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 1415.787] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 7)
[ 1415.787] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 1415.787] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 1415.787] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 1415.787] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 1418.003] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1432.099] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1432.099] (II) intel(0): switch to mode 1366x768@59.9 on DP1 using pipe 0,
position (0, 0), rotation normal,
reflection none
This is output for normal modesetting driver.
[ 178.919] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 178.919] linear framebuffer access unavailable
[ 178.939] (--) Using wscons driver on /dev/ttyC4
[ 179.410]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 179.410] Build Operating System: OpenBSD 6.8 amd64
[ 179.410] Current Operating System: OpenBSD orca.iballbatonwifi.com 6.8
GENERIC.MP#188 amd64
[ 179.411] Build Date: 20 November 2020 06:33:08PM
[ 179.411]
[ 179.411] Current version of pixman: 0.38.4
[ 179.411] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 179.411] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 179.411] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 25 10:45:48
2020
[ 179.509] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 179.660] (==) No Layout section. Using the first Screen section.
[ 179.698] (==) No screen section available. Using defaults.
[ 179.698] (**) |-->Screen "Default Screen Section" (0)
[ 179.698] (**) | |-->Monitor "<default monitor>"
[ 179.798] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 179.798] (==) Automatically adding devices
[ 179.798] (==) Automatically enabling devices
[ 179.798] (==) Not automatically adding GPU devices
[ 179.814] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 180.389] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 180.389] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 180.389] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 180.406] (II) Loader magic: 0x9df18f86940
[ 180.406] (II) Module ABI versions:
[ 180.406] X.Org ANSI C Emulation: 0.4
[ 180.406] X.Org Video Driver: 24.1
[ 180.406] X.Org XInput driver : 24.1
[ 180.406] X.Org Server Extension : 10.0
[ 180.424] (--) PCI:*(0@0:2:0) 8086:3e91:1458:d000 rev 0, Mem @
0xf6000000/16777216, 0xe0000000/268435456, I/O @
0x0000f000/64
[ 180.440] (II) LoadModule: "glx"
[ 180.589] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 181.813] (II) Module glx: vendor="X.Org Foundation"
[ 181.813] compiled for 1.20.8, module version = 1.0.0
[ 181.813] ABI class: X.Org Server Extension, version 10.0
[ 181.827] (==) Matched modesetting as autoconfigured driver 0
[ 181.827] (==) Assigned the driver to the xf86ConfigLayout
[ 181.827] (II) LoadModule: "modesetting"
[ 181.827] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[ 181.906] (II) Module modesetting: vendor="X.Org Foundation"
[ 181.906] compiled for 1.20.8, module version = 1.20.8
[ 181.906] Module class: X.Org Video Driver
[ 181.906] ABI class: X.Org Video Driver, version 24.1
[ 181.906] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 181.947] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 181.947] (II) modeset(0): using default device
[ 181.948] (II) modeset(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 181.948] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 181.948] (==) modeset(0): RGB weight 888
[ 181.948] (==) modeset(0): Default visual is TrueColor
[ 181.948] (II) Loading sub module "glamoregl"
[ 181.948] (II) LoadModule: "glamoregl"
[ 181.981] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[ 182.890] (II) Module glamoregl: vendor="X.Org Foundation"
[ 182.890] compiled for 1.20.8, module version = 1.0.1
[ 182.890] ABI class: X.Org ANSI C Emulation, version 0.4
[ 198.795] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R)
UHD Graphics 630 (CFL GT2)
[ 198.795] (II) modeset(0): glamor initialized
[ 198.808] (II) modeset(0): Output HDMI-1 has no monitor section
[ 198.822] (II) modeset(0): Output DP-1 has no monitor section
[ 198.834] (II) modeset(0): Output HDMI-2 has no monitor section
[ 198.887] (II) modeset(0): EDID for output HDMI-1
[ 198.902] (II) modeset(0): EDID for output DP-1
[ 198.902] (II) modeset(0): Manufacturer: ACR Model: 280 Serial#: 277905557
[ 198.902] (II) modeset(0): Year: 2011 Week: 9
[ 198.902] (II) modeset(0): EDID Version: 1.4
[ 198.902] (II) modeset(0): Digital Display Input
[ 198.902] (II) modeset(0): 8 bits per channel
[ 198.902] (II) modeset(0): Digital interface is DisplayPort
[ 198.902] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 198.902] (II) modeset(0): Gamma: 2.20
[ 198.902] (II) modeset(0): DPMS capabilities: Off
[ 198.902] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 198.902] (II) modeset(0): Default color space is primary color space
[ 198.902] (II) modeset(0): First detailed timing is preferred mode
[ 198.902] (II) modeset(0): Preferred mode is native pixel format and refresh
rate
[ 198.902] (II) modeset(0): redX: 0.623 redY: 0.351 greenX: 0.336 greenY:
0.574
[ 198.902] (II) modeset(0): blueX: 0.148 blueY: 0.053 whiteX: 0.313 whiteY:
0.329
[ 198.902] (II) modeset(0): Supported established timings:
[ 198.902] (II) modeset(0): 640x480@60Hz
[ 198.902] (II) modeset(0): 800x600@56Hz
[ 198.902] (II) modeset(0): 800x600@60Hz
[ 198.902] (II) modeset(0): 1024x768@60Hz
[ 198.902] (II) modeset(0): Manufacturer's mask: 0
[ 198.902] (II) modeset(0): Supported standard timings:
[ 198.902] (II) modeset(0): #0: hsize: 1280 vsize 720 refresh: 60 vid:
49281
[ 198.902] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 198.902] (II) modeset(0): Supported detailed timing:
[ 198.902] (II) modeset(0): clock: 85.5 MHz Image Size: 344 x 194 mm
[ 198.902] (II) modeset(0): h_active: 1366 h_sync: 1435 h_sync_end 1578
h_blank_end 1790 h_border: 0
[ 198.902] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 781
v_blanking: 798 v_border: 0
[ 198.902] (II) modeset(0): Ranges: V min: 50 V max: 60 Hz, H min: 30 H max:
50 kHz, PixClock max 165 MHz
[ 198.902] (II) modeset(0): Monitor name: Acer P166HQL
[ 198.902] (II) modeset(0): Serial No: LTY080014200
[ 198.902] (II) modeset(0): EDID (in hex):
[ 198.902] (II) modeset(0): 00ffffffffffff000472800295809010
[ 198.902] (II) modeset(0): 09150104a522137826b0259f59569326
[ 198.902] (II) modeset(0): 0d505423080081c08100010101010101
[ 198.902] (II) modeset(0): 010101010101662156a851001e30458f
[ 198.902] (II) modeset(0): 3a0058c21000001c000000fd00323c1e
[ 198.902] (II) modeset(0): 3210000a202020202020000000fc0041
[ 198.902] (II) modeset(0): 636572205031363648514c0a000000ff
[ 198.902] (II) modeset(0): 004c54593038303031343230300a00f7
[ 198.903] (II) modeset(0): Printing probed modes for output DP-1
[ 198.903] (II) modeset(0): Modeline "1366x768"x59.9 85.50 1366 1435 1578
1790 768 771 781 798 -hsync +vsync
(47.8 kHz eP)
[ 198.903] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync
(49.7 kHz e)
[ 198.903] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430
1650 720 725 730 750 +hsync +vsync
(45.0 kHz e)
[ 198.903] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
[ 198.903] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9
kHz e)
[ 198.903] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2
kHz e)
[ 198.903] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5
kHz e)
[ 198.915] (II) modeset(0): EDID for output HDMI-2
[ 198.915] (II) modeset(0): Output HDMI-1 disconnected
[ 198.915] (II) modeset(0): Output DP-1 connected
[ 198.915] (II) modeset(0): Output HDMI-2 disconnected
[ 198.915] (II) modeset(0): Using exact sizes for initial modes
[ 198.915] (II) modeset(0): Output DP-1 using initial mode 1366x768 +0+0
[ 198.915] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 198.915] (==) modeset(0): DPI set to (96, 96)
[ 198.915] (II) Loading sub module "fb"
[ 198.915] (II) LoadModule: "fb"
[ 198.916] (II) Loading /usr/X11R6/lib/modules/libfb.so
[ 198.999] (II) Module fb: vendor="X.Org Foundation"
[ 198.999] compiled for 1.20.8, module version = 1.0.0
[ 198.999] ABI class: X.Org ANSI C Emulation, version 0.4
[ 200.556] (==) modeset(0): Backing store enabled
[ 200.556] (==) modeset(0): Silken mouse enabled
[ 200.848] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 200.879] (==) modeset(0): DPMS enabled
[ 200.885] (II) modeset(0): [DRI2] Setup complete
[ 200.885] (II) modeset(0): [DRI2] DRI driver: iris
[ 200.885] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 200.886] (II) Initializing extension Generic Event Extension
[ 200.886] (II) Initializing extension SHAPE
[ 200.887] (II) Initializing extension MIT-SHM
[ 200.887] (II) Initializing extension XInputExtension
[ 200.888] (II) Initializing extension XTEST
[ 200.888] (II) Initializing extension BIG-REQUESTS
[ 200.888] (II) Initializing extension SYNC
[ 200.889] (II) Initializing extension XKEYBOARD
[ 200.890] (II) Initializing extension XC-MISC
[ 200.890] (II) Initializing extension SECURITY
[ 200.890] (II) Initializing extension XFIXES
[ 200.891] (II) Initializing extension RENDER
[ 200.892] (II) Initializing extension RANDR
[ 200.892] (II) Initializing extension COMPOSITE
[ 200.894] (II) Initializing extension DAMAGE
[ 200.894] (II) Initializing extension MIT-SCREEN-SAVER
[ 200.935] (II) Initializing extension DOUBLE-BUFFER
[ 200.936] (II) Initializing extension RECORD
[ 200.937] (II) Initializing extension DPMS
[ 200.937] (II) Initializing extension Present
[ 200.937] (II) Initializing extension DRI3
[ 200.938] (II) Initializing extension X-Resource
[ 200.938] (II) Initializing extension XVideo
[ 200.939] (II) Initializing extension XVideo-MotionCompensation
[ 200.939] (II) Initializing extension GLX
[ 200.958] (II) AIGLX: Loaded and initialized iris
[ 200.958] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 200.958] (II) Initializing extension XFree86-VidModeExtension
[ 200.958] (II) Initializing extension XFree86-DGA
[ 200.959] (II) Initializing extension XFree86-DRI
[ 201.022] (II) Initializing extension DRI2
[ 201.188] (II) modeset(0): Damage tracking initialized
[ 201.188] (II) modeset(0): Setting screen physical size to 361 x 203
[ 204.114] (II) config/wscons: checking input device /dev/wskbd
[ 204.114] (II) wskbd: using layout us
[ 204.114] (II) LoadModule: "kbd"
[ 204.114] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 204.157] (II) Module kbd: vendor="X.Org Foundation"
[ 204.157] compiled for 1.20.8, module version = 1.9.0
[ 204.157] Module class: X.Org XInput Driver
[ 204.157] ABI class: X.Org XInput driver, version 24.1
[ 204.158] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 204.158] (**) /dev/wskbd: always reports core events
[ 204.158] (**) /dev/wskbd: always reports core events
[ 204.158] (**) Option "Protocol" "standard"
[ 204.158] (**) Option "XkbRules" "base"
[ 204.158] (**) Option "XkbModel" "pc105"
[ 204.158] (**) Option "XkbLayout" "us"
[ 204.158] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 204.658] (II) config/wscons: checking input device /dev/wsmouse
[ 204.658] (II) LoadModule: "ws"
[ 204.658] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 204.706] (II) Module ws: vendor="X.Org Foundation"
[ 204.706] compiled for 1.20.8, module version = 1.3.0
[ 204.706] Module class: X.Org XInput Driver
[ 204.706] ABI class: X.Org XInput driver, version 24.1
[ 204.706] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 204.706] (**) /dev/wsmouse: always reports core events
[ 204.707] (II) ws: /dev/wsmouse: debuglevel 0
[ 204.707] (**) Option "Device" "/dev/wsmouse"
[ 204.707] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 204.707] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 204.707] (**) ws: /dev/wsmouse: associated screen: 0
[ 204.707] (II) ws: /dev/wsmouse: minimum x position: 0
[ 204.707] (II) ws: /dev/wsmouse: maximum x position: 1365
[ 204.707] (II) ws: /dev/wsmouse: minimum y position: 0
[ 204.707] (II) ws: /dev/wsmouse: maximum y position: 767
[ 204.707] (==) ws: /dev/wsmouse: Buttons: 7
[ 204.707] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 204.708] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type:
MOUSE, id 7)
[ 204.708] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 204.708] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 204.708] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 204.708] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 258.747] (II) modeset(0): EDID vendor "ACR", prod id 640
[ 258.793] (II) modeset(0): Using EDID range info for horizontal sync
[ 258.793] (II) modeset(0): Using EDID range info for vertical refresh
[ 258.793] (II) modeset(0): Printing DDC gathered Modelines:
[ 258.793] (II) modeset(0): Modeline "1366x768"x0.0 85.50 1366 1435 1578
1790 768 771 781 798 -hsync +vsync
(47.8 kHz eP)
[ 258.793] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9
kHz e)
[ 258.793] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2
kHz e)
[ 258.793] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 258.793] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
[ 258.793] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472
1664 720 721 724 746 -hsync +vsync
(44.8 kHz e)
[ 258.793] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync
(49.7 kHz e)
[ 1613.299] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1641.214] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1641.306] (II) modeset(0): EDID vendor "ACR", prod id 640
[ 1641.306] (II) modeset(0): Using hsync ranges from config file
[ 1641.306] (II) modeset(0): Using vrefresh ranges from config file
[ 1641.306] (II) modeset(0): Printing DDC gathered Modelines:
[ 1641.306] (II) modeset(0): Modeline "1366x768"x0.0 85.50 1366 1435 1578
1790 768 771 781 798 -hsync +vsync
(47.8 kHz eP)
[ 1641.306] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9
kHz e)
[ 1641.306] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2
kHz e)
[ 1641.306] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1641.306] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync
(48.4 kHz e)
[ 1641.306] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472
1664 720 721 724 746 -hsync +vsync
(44.8 kHz e)
[ 1641.306] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480
1680 800 803 809 831 -hsync +vsync
(49.7 kHz e)
[ 1642.820] (II) AIGLX: Suspending AIGLX clients for VT switch
Dmesg, output after blender freezes.
> OpenBSD 6.8-current (GENERIC.MP) #188: Fri Nov 20 18:05:19 MST 2020
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 7443300352 (7098MB) avail mem = 7202414592 (6868MB) random: good
> seed from bootblocks
> mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at
> mainbus0: SMBIOS rev. 2.8 @ 0x8dcc7000 (90
> entries) bios0: vendor American Megatrends Inc. version "C4" date 12/03/2018
> bios0: Gigabyte Technology Co., Ltd. H110M-H
> acpi0 at bios0: ACPI 6.0 acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG SSDT SSDT HPET SSDT SSDT UEFI
> SSDT LPIT SSDT SSDT SSDT SSDT SSDT DBGP DBG2
> DMAR BGRT WSMT
> acpi0: wakeup devices PS2K(S3) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4)
> PXSX(S4) RP12(S4) PXSX(S4) RP13(S4)
> PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000:
> PC-AT compat cpu0 at mainbus0: apid 0
(boot
> processor) cpu0: Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz, 3601.40 MHz,
> 06-9e-0b
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
> ,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DE
> ADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,A
> RAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 24MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM)
> i3-8100 CPU @ 3.60GHz, 3600.01 MHz, 06-9e-0b
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
> ,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DE
> ADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,A
> RAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM)
> i3-8100 CPU @ 3.60GHz, 3600.01 MHz, 06-9e-0b
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
> ,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DE
> ADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,A
> RAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Core(TM)
> i3-8100 CPU @ 3.60GHz, 3600.01 MHz, 06-9e-0b
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
> ,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DE
> ADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,
> SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,A
> RAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins acpimcfg0 at
> acpi0 acpimcfg0: addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 23999999 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at
> acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus
> -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2) acpiprt4 at acpi0: bus 5 (RP09) acpiprt5 at
> acpi0: bus 6 (RP10) acpiprt6 at acpi0: bus
> -1 (RP11)
> acpiprt7 at acpi0: bus -1 (RP12) acpiprt8 at acpi0: bus -1 (RP13) acpiprt9 at
> acpi0: bus -1 (RP01) acpiprt10 at acpi0:
> bus -1 (RP02) acpiprt11 at acpi0: bus -1 (RP03) acpiprt12 at acpi0: bus -1
> (RP04) acpiprt13 at acpi0: bus 1 (RP05)
> acpiprt14 at acpi0: bus 2 (RP06) acpiprt15 at acpi0: bus 3 (RP07) acpiprt16
> at acpi0: bus 4 (RP08) acpiprt17 at acpi0:
> bus -1 (RP17) acpiprt18 at acpi0: bus -1 (RP18) acpiprt19 at acpi0: bus -1
> (RP19) acpiprt20 at acpi0: bus -1 (RP20)
> acpiprt21 at acpi0: bus -1 (RP21) acpiprt22 at acpi0: bus -1 (RP22) acpiprt23
> at acpi0: bus -1 (RP23) acpiprt24 at
> acpi0: bus -1 (RP24)
> acpiprt25 at acpi0: bus -1 (RP14) acpiprt26 at acpi0: bus -1 (RP15) acpiprt27
> at acpi0: bus -1 (RP16) acpiec0 at acpi0:
> not present acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> acpicmos0 at acpi0 acpibtn0 at acpi0: SLPB
"INT33A1"
> at acpi0 not configured acpibtn1 at acpi0: PWRB "PNP0C0B" at acpi0 not
> configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS acpicpu1 at acpi0:
> C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS acpicpu3 at acpi0:
> C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: FN00, resource for FAN0 acpipwrres1 at acpi0: FN01,
> resource for FAN1 acpipwrres2 at acpi0: FN02,
> resource for FAN2 acpipwrres3 at acpi0: FN03, resource for FAN3 acpipwrres4
> at acpi0: FN04, resource for FAN4
acpitz0 at
> acpi0: critical temperature is 119 degC
> acpitz1 at acpi0: critical temperature is 119 degC acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F cpu0: using
> VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 3601 MHz: speeds: 3600, 3400, 3200, 3000, 2900,
> 2700, 2500, 2300, 2100, 1900, 1700, 1500,
> 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host"
> rev 0x08 inteldrm0 at pci0 dev 2 function 0
> "Intel UHD Graphics 630" rev 0x00
> drm0 at inteldrm0 inteldrm0: msi, COFFEELAKE, gen 9
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI
> 1.0 usb0 at xhci0: USB revision 3.0
uhub0 at
> usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> "Intel 100 Series MEI" rev 0x31 at pci0
> dev 22 function 0 not configured ahci0 at pci0 dev 23 function 0 "Intel 100
> Series AHCI" rev 0x31: msi, AHCI 1.3.1
> ahci0: port 0: 3.0Gb/s
> ahci0: PHY offline on port 1
> ahci0: PHY offline on port 2
> ahci0: port 3: 1.5Gb/s
> scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, WDC
> WD3200AAKS-0, 01.0> naa.50014ee15964c738 sd0:
> 305245MB, 512 bytes/sector, 625142448 sectors
> cd0 at scsibus1 targ 3 lun 0: <HL-DT-ST, DVDRAM GH24NS70, GN00> removable
> ppb0 at pci0 dev 28 function 0 "Intel 100
> Series PCIE" rev 0xf1: msi
> pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x0c:
> RTL8168G/8111G (0x4c00), msi, address
> e0:d5:5e:7e:2b:60
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 ppb1 at pci0 dev 28 function 5
> "Intel 100 Series PCIE" rev 0xf1: msi pci2 at
> ppb1 bus 2 ppb2 at pci0 dev 28 function 6 "Intel 100 Series PCIE" rev 0xf1:
> msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28
> function 7 "Intel 100 Series PCIE" rev 0xf1: msi pci4 at ppb3 bus 4 ppb4 at
> pci0 dev 29 function 0 "Intel 100 Series
> PCIE" rev 0xf1: msi
> pci5 at ppb4 bus 5 ppb5 at pci0 dev 29 function 1 "Intel 100 Series PCIE" rev
> 0xf1: msi pci6 at ppb5 bus 6 pcib0 at
pci0
> dev 31 function 0 "Intel H110 LPC" rev 0x31 "Intel 100 Series PMC" rev 0x31
> at pci0 dev 31 function 2 not configured
> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x31: msi
> azalia0: codecs: Realtek ALC887,
> Intel/0x280b, using Realtek ALC887
> audio0 at azalia0 ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus"
> rev 0x31: apic 2 int 16 iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 8GB DDR4 SDRAM PC4-19200 isa0 at pcib0 isadma0 at
> isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq
> 12
> pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pcppi0 at isa0
> port 0x61 spkr0 at pcppi0 vmm0 at
mainbus0:
> VMX/EPT
> efifb at mainbus0 not configured uhidev0 at uhub0 port 3 configuration 1
> interface 0 "Logitech USB Optical Mouse" rev
> 2.00/72.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir wsmouse0 at ums0 mux 0 umass0 at uhub0 port
> 5 configuration 1 interface 0 "SanDisk
> Cruzer Blade" rev 2.00/1.00 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0:
> <SanDisk, Cruzer Blade, 1.00> removable
> serial.07815567190827121332 sd1: 29952MB, 512 bytes/sector, 61341696 sectors
> uhidev1 at uhub0 port 6 configuration 1 interface 0 "Logitech USB Keyboard"
> rev 1.10/64.00 addr 4 uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 uhidev2
> at uhub0 port 6 configuration 1
interface 1
> "Logitech USB Keyboard" rev 1.10/64.00 addr 4
> uhidev2: iclass 3/0, 3 report ids
> uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev2
> reportid 2: input=1, output=0, feature=0
> uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0 vscsi0 at root
> scsibus3 at vscsi0: 256 targets softraid0 at
> root scsibus4 at softraid0: 256 targets sd2 at scsibus4 targ 1 lun 0:
> <OPENBSD, SR CRYPTO, 006> sd2: 214843MB, 512
> bytes/sector, 439999472 sectors sd3 at scsibus4 targ 2 lun 0: <OPENBSD, SR
> CRYPTO, 006> sd3: 90400MB, 512 bytes/sector,
> 185140833 sectors
> root on sd2a (1e9e340bdfd7f8ae.a) swap on sd2b dump on sd2b drm :
> drm_WARN_ON(!IS_PLATFORM(dev_priv, INTEL_SKYLAKE) &&
> !IS_PLATFORM(dev_priv, INTEL_KABYLAKE))inteldrm0: 1366x768,
> 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> drm:pid6262:intel_engine_reset *NOTICE* Resetting rcs0 for preemption time out
> drm:pid6262:mark_guilty *NOTICE* blender-bin[69722] context reset due to GPU
> hang
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> i915_vma_coredump_create: stub
> pool_fini: stub
>
>
>
