The same here. Maintainer seems unreachable.
On Mon, Jan 01, 2007 at 01:34:16PM +0100, Didier Wiroth wrote: >Hello, >I'm trying to use tightvnc-1.2.9p0 on current amd64 (with intel dual core cpu). >The Xvnc server core dumps after starting wiith the following log: >Getting interface configuration (4): Device not configured >31/12/06 17:24:44 Xvnc version 3.3.tight1.2.9 >31/12/06 17:24:44 Copyright (C) 1999 AT&T Laboratories Cambridge. >31/12/06 17:24:44 Copyright (C) 2000-2002 Constantin Kaplinsky. >31/12/06 17:24:44 All Rights Reserved. >31/12/06 17:24:44 See http://www.uk.research.att.com/vnc for information on VNC >31/12/06 17:24:44 See http://www.tightvnc.com for TightVNC-specific information >31/12/06 17:24:44 Desktop name 'test' (dreyfus:1) >31/12/06 17:24:44 Protocol version supported 3.3 >31/12/06 17:24:44 Listening for VNC connections on TCP port 5901 >31/12/06 17:24:44 Listening for HTTP connections on TCP port 5801 >31/12/06 17:24:44 URL http://dreyfus:5801 >xrdb: Can't open display ':1' >xsetroot: unable to open display ':1' >twm: unable to open display ":1" >xterm Xt error: Can't open display: 1 > >I'm starting Xvnc as a standard user like this: >vncserver :1 -geometry 1280x1024 -depth 16 -name test -localhost > >Could someone else confirm this core dump on amd64 with an "intel dual core >cpu"? > >Here is my dmesg: >OpenBSD 4.0-current (GENERIC.MP_acpi) #0: Sun Dec 31 15:55:48 CET 2006 > [EMAIL PROTECTED]:/home/sources/src/sys/arch/amd64/compile/GENERIC.MP_acpi >real mem = 3220303872 (3144828K) >avail mem = 2757431296 (2692804K) >using 22937 buffers containing 322236416 bytes (314684K) of memory >mainbus0 (root) >bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0690 (74 entries) >bios0: stem manufacturer P5WDG2 WS PRO >acpi0 at mainbus0: rev 2 >acpi0: tables DSDT FACP APIC OEMB HPET MCFG >acpitimer0 at acpi0: 3579545 Hz, 24 bits >acpi device at acpi0 from table DSDT not configured >acpi device at acpi0 from table FACP not configured >acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat >LAPIC: acpi_proc_id 1, apic_id 0, flags 0x1 >cpu0 at mainbus0: apid 0 (boot processor) >cpu0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, 2671.61 MHz >cpu0: >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG >cpu0: 4MB 64b/line 16-way L2 cache >cpu0: apic clock running at 267MHz >LAPIC: acpi_proc_id 2, apic_id 1, flags 0x1 >cpu1 at mainbus0: apid 1 (application processor) >cpu1: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, 2671.24 MHz >cpu1: >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG >cpu1: 4MB 64b/line 16-way L2 cache >LAPIC: acpi_proc_id 3, apic_id 82, flags 0x0 >LAPIC: acpi_proc_id 4, apic_id 83, flags 0x0 >IOAPIC: acpi_ioapic_id 2, address 0xfec00000, global_int_base 0x0 >ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins >IOAPIC: acpi_ioapic_id 3, address 0xfec10000, global_int_base 0x18 >ioapic1 at mainbus0 apid 3 pa 0xfec10000, version 20, 24 pins >OVERRIDE: bus 0, source 0, global_int 2, flags 0 >OVERRIDE: bus 0, source 9, global_int 9, flags d >OVERRIDE: bus 0, source 0, global_int 2, flags 0 >OVERRIDE: bus 0, source 9, global_int 9, flags d >acpi device at acpi0 from table OEMB not configured >acpihpet0 at acpi0 table HPET: 14318179 Hz >acpi device at acpi0 from table MCFG not configured >acpiprt0 at acpi0: bus 0 (PCI0) >acpiprt1 at acpi0: bus 7 (P0P1) >acpiprt2 at acpi0: bus 0 (P0P2) >acpiprt3 at acpi0: bus 1 (P0P3) >acpiprt4 at acpi0: bus 3 (P0P8) >acpiprt5 at acpi0: bus 2 (P0P9) >acpiprt6 at acpi0: bus 4 (P0P4) >acpiprt7 at acpi0: bus 5 (PXHA) >acpibtn0 at acpi0: SLPB >acpibtn1 at acpi0: PWRB >pci0 at mainbus0 bus 0: configuration mode 1 >pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x277c rev 0xc0 >ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x277d rev 0xc0 >pci1 at ppb0 bus 7 >vga1 at pci1 dev 0 function 0 "ATI Radeon X300" rev 0x00 >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >"ATI Radeon X300 Sec" rev 0x00 at pci1 dev 0 function 1 not configured >azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 >int 19 (irq 5) >azalia0: host: High Definition Audio rev. 1.0 >azalia0: codec: 0x04x/0x11d4 (rev. 2.0), HDA version 1.0 >audio0 at azalia0 >ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 >pci2 at ppb1 bus 4 >ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 >pci3 at ppb2 bus 5 >ppb3 at pci3 dev 2 function 0 "Intel IOP331 PCIX-PCIX" rev 0x0a >pci4 at ppb3 bus 6 >ami0 at pci4 dev 14 function 0 "Symbios Logic MegaRAID SATA 4x/8x" rev 0x0a: >apic 3 int 4 (irq 11) >ami0: LSI 3008, 32b, FW 814D, BIOS vH431, 128MB RAM >ami0: 1 channels, 0 FC loops, 3 logical drives >scsibus0 at ami0: 40 targets >sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed >sd0: 100000MB, 100000 cyl, 64 head, 32 sec, 512 bytes/sec, 204800000 sec total >sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed >sd1: 49998MB, 49998 cyl, 64 head, 32 sec, 512 bytes/sec, 102395904 sec total >sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed >sd2: 629606MB, 629606 cyl, 64 head, 32 sec, 512 bytes/sec, 1289433088 sec total >scsibus1 at ami0: 16 targets >ppb4 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 >pci5 at ppb4 bus 3 >mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, Marvell >Yukon-2 EC rev. A3 (0x2): apic 2 int 16 (irq 11) >msk0 at mskc0 port A, address 00:18:f3:29:a2:53 >eephy0 at msk0 phy 0: Marvell 88E1111 Gigabit PHY, rev. 2 >ppb5 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 >pci6 at ppb5 bus 2 >vendor "Marvell", unknown product 0x6141 (class mass storage subclass SATA, >rev 0x01) at pci6 dev 0 function 0 not configured >uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 >(irq 3) >usb0 at uhci0: USB revision 1.0 >uhub0 at usb0 >uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 >uhub0: 2 ports with 2 removable, self powered >uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 17 >(irq 10) >usb1 at uhci1: USB revision 1.0 >uhub1 at usb1 >uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 >uhub1: 2 ports with 2 removable, self powered >uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18 >(irq 10) >usb2 at uhci2: USB revision 1.0 >uhub2 at usb2 >uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 >uhub2: 2 ports with 2 removable, self powered >uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 19 >(irq 5) >usb3 at uhci3: USB revision 1.0 >uhub3 at usb3 >uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 >uhub3: 2 ports with 2 removable, self powered >ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 >(irq 3) >usb4 at ehci0: USB revision 2.0 >uhub4 at usb4 >uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 >uhub4: 8 ports with 8 removable, self powered >ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 >pci7 at ppb6 bus 1 >"TI TSB43AB22 FireWire" rev 0x00 at pci7 dev 3 function 0 not configured >skc0 at pci7 dev 5 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x14, >Marvell Yukon Lite (0x9): apic 2 int 21 (irq 5) >sk0 at skc0 port A, address 00:18:f3:29:a2:54 >eephy1 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5 >pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 >pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 >configured to compatibility, channel 1 configured to compatibility >atapiscsi0 at pciide0 channel 0 drive 0 >scsibus2 at atapiscsi0: 2 targets >cd0 at scsibus2 targ 0 lun 0: <_NEC, DVD_RW ND-4571A, 1-01> SCSI0 5/cdrom >removable >atapiscsi1 at pciide0 channel 0 drive 1 >scsibus3 at atapiscsi1: 2 targets >cd1 at scsibus3 targ 0 lun 0: <TSSTcorp, DVD-ROM SH-D162C, TS04> SCSI0 5/cdrom >removable >cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 >cd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 >pciide0: channel 1 disabled (no drives) >pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel >0 configured to native-PCI, channel 1 configured to native-PCI >pciide1: using apic 2 int 23 (irq 11) for native-PCI interrupt >ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int >23 (irq 0) >iic0 at ichiic0 >isa0 at pcib0 >isadma0 at isa0 >com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >pckbc0 at isa0 port 0x60/5 >pckbd0 at pckbc0 (kbd slot) >pckbc0: using irq 1 for kbd slot >wskbd0 at pckbd0: console keyboard, using wsdisplay0 >pcppi0 at isa0 port 0x61 >midi0 at pcppi0: <PC speaker> >spkr0 at pcppi0 >lpt0 at isa0 port 0x378/4 irq 7 >lm0 at isa0 port 0x290/8: unknown Winbond chip (ID 0xc1) >fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 >fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec >uhidev0 at uhub1 port 1 configuration 1 interface 0 >uhidev0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, >iclass 3/1 >ukbd0 at uhidev0: 8 modifier keys, 6 key codes >wskbd1 at ukbd0 mux 1 >wskbd1: connecting to wsdisplay0 >uhidev1 at uhub1 port 1 configuration 1 interface 1 >uhidev1: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, >iclass 3/0 >uhidev1: 1 report ids >uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0 >uhidev2 at uhub1 port 2 configuration 1 interface 0 >uhidev2: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev >1.10/3.00, addr 3, iclass 3/1 >ums0 at uhidev2: 5 buttons and Z dir. >wsmouse0 at ums0 mux 0 >dkcsum: sd0 matches BIOS drive 0x80 >dkcsum: sd1 matches BIOS drive 0x81 >dkcsum: sd2 matches BIOS drive 0x82 >root on sd0a >rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 > >Thanks for helping! >
