There was a problem using UMAX ASTRA 1220U scanner with uscanner driver:
> OK, I know where the problem is... the uscanner driver on OpenBSD does
> not support some needed functionnalities.
> Could you try to disable uscanner in your kernel using config(8), so you
> don't have anything to compile.
> Please, also use the included port and tell me if that works after that...
>
> Thanks.
>
> Antoine
>
# config -o /bsd.new -e /bsd
OpenBSD 3.8 (GENERIC) #137: Thu Sep 1 17:41:20 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
Enter 'help' for information
ukc> disable uscanner
314 uscanner* disabled
ukc> quit
Saving modified kernel.
# cp /bsd /bsd.old && cp /bsd.new /bsd
# shutdown -r now
Then scanner appeared as:
# dmesg | grep ugen
ugen0 at uhub0 port 1
ugen0: UMAX Data Systems Astra 1220U, rev 1.00/1.00, addr 2
# sane-find-scanner
[..]
found USB scanner (vendor=0x1606, product=0x0010) at libusb:/dev/usb0:/dev/ugen0
[..]
# scanimage -L
device `umax1220u:libusb:/dev/usb0:/dev/ugen0' is a UMAX Astra 1220U flatbed
scanner
# scanimage -x 200 -y 100 > /tmp/bu.tiff
Scans fine!!!
Thankyou Antoine!
Maybe uscanner could be fixed to avoid need for this workaround?
-------------------------------------------------------------------------------
http://www.one.lv - Tavs mobilais e-pasts!
Tagad lasi savu e-pastu ar mobilo telefonu - wap.one.lv!
