>On 6/18/05, Ben Hooper <[EMAIL PROTECTED]> wrote: >> >> |Btw. the BSD-Airtools fail too (tested with a Wi-Interface >> |wich should be >> |definitifly supported by the BSD-Airtools). >> >> I use dstumbler frequetly with wi(4). What problems are you seeing? > >Indeed. All my cards work with airtools. You'll note that there hasn't >been a new release of bsd-airtools in ages. > >These three are prism... >wi0 at pci1 dev 2 function 0 "Intersil PRISM2.5" rev 0x01: irq 11 >wi0: PRISM2.5 ISL3874A(Mini-PCI), Firmware 1.1.0 (primary), 1.4.9 >(station), address 00:05:3c:04:b5:d4 > >wi1 at pcmcia0 function 0 "Instant Wireless , Network PC CARD, >Version 01.02" port 0xa000/64 >wi1: PRISM2 HWB3163 rev.A, Firmware 0.3.0 (primary), 0.8.3 (station), >address 00:06:25:52:2f:de > >wi2 at pcmcia1 function 0 "WLAN, 11Mbps_PC-Card_3.0, ISL37100P" port >0xa000/64 >wi2: PRISM3 ISL37300P, Firmware 1.1.1 (primary), 1.8.0 (station), >address 00:02:6f:33:69:1a > >This one's an orinoco, so I can't use monitor mode, but it works too... >wi1 at pcmcia0 function 0 "Compaq, Compaq WL110 PC Card, Version >01.01" port 0xa000/64 >wi1: Firmware 8.72 variant 1, address 00:02:a5:2e:1c:5f > > >-- >GDB has a 'break' feature; why doesn't it have 'fix' too?
The problem I have is that the airtools get absolutly nothing even the AP spread the nwid and even the accesmode is "open" (no nwkey). I use e.g. at my notebook a MA111 with a Prism3. But you're absolutly right. The software isn't maintained anymore so it would be a good step to include and modify it because OpenBSD miss such software. :-/ And because hostapD: It would be a logical step to include also a software wich enables an Admin to test the WLAN's. Kind regards, Sebastian ps. Please CC because I'm not getting mails from ports@
