On Thu, Feb 17, 2011 at 2:52 PM, Michael C. Robinson <[email protected]> wrote: > I'm trying to set up an Asterisk server and I want to be able to use a > standard analog telephone on the far end of an IPv4 network. > > Do I want a Linksys SPA2102 NA or a Linksys PAP2 NA? I'm thinking of > using one of these devices typically used to connect to a VoIP provider > in conjunction with my Asterisk server instead. For starters, all I > want to do is enable local calling to different buildings/rooms on the > IP network. > > I plan on tying in 2 local phone lines in via the Asterisk server > with a 2 FXO/2 FXS card, but this may not be a right away thing. > > Do I use one Linksys PAP2 NA per room or is there a better way to go > about this? >
You should be able to use direct ip-to-ip dialing. You need to set this up in the configuration of the ATA device. If you point them to the asterisk server then your dialing plan could have the simple dial codes for all your rooms and even handle your remote ip to ip calling. If you have your asterisk server register with your voip provider and set a dial plan in the server then you could use any phone to do ip-to-ip or out to the outside world. _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
