# Autogenerated configuration file template

#################################
# ignore-unknown-settings	Configuration settings to ignore if they are unknown
#
# ignore-unknown-settings=

#################################
# 8bit-dns	Allow 8bit dns queries
#
# 8bit-dns=no

#################################
# allow-axfr-ips	Allow zonetransfers only to these subnets
#
# allow-axfr-ips=127.0.0.0/8,::1
allow-axfr-ips=200.7.170.100,200.7.160.10
#allow-axfr-ips=200.7.161.186

#################################
# allow-dnsupdate-from	A global setting to allow DNS updates from these IP ranges.
#
allow-dnsupdate-from=127.0.0.0/8,::1

#################################
# allow-notify-from	Allow AXFR NOTIFY from these IP ranges. If empty, drop all incoming notifies.
#
# allow-notify-from=0.0.0.0/0,::/0
allow-notify-from=0.0.0.0/0

#################################
# allow-unsigned-autoprimary	Allow autoprimaries to create zones without TSIG signed NOTIFY
#
# allow-unsigned-autoprimary=yes

#################################
# allow-unsigned-notify	Allow unsigned notifications for TSIG secured zones
#
# allow-unsigned-notify=yes

#################################
# allow-unsigned-supermaster	Allow supermasters to create zones without TSIG signed NOTIFY
#
# allow-unsigned-supermaster=yes

#################################
# also-notify	When notifying a zone, also notify these nameservers
#
# also-notify=
# also-notify=200.7.161.186

#################################
# any-to-tcp	Answer ANY queries with tc=1, shunting to TCP
#
# any-to-tcp=yes

#################################
# api	Enable/disable the REST API (including HTTP listener)
#
api=yes

#################################
# api-key	Static pre-shared authentication key for access to the REST API
#
api-key=umsatic

#################################
# autosecondary	Act as an autosecondary (formerly superslave)
#
# autosecondary=no

#################################
# axfr-fetch-timeout	Maximum time in seconds for inbound AXFR to start or be idle after starting
#
# axfr-fetch-timeout=10

#################################
# axfr-lower-serial	Also AXFR a zone from a master with a lower serial
#
# axfr-lower-serial=no

#################################
# cache-ttl	Seconds to store packets in the PacketCache
#
# cache-ttl=20

#################################
# carbon-instance	If set overwrites the instance name default
#
# carbon-instance=auth

#################################
# carbon-interval	Number of seconds between carbon (graphite) updates
#
# carbon-interval=30

#################################
# carbon-namespace	If set overwrites the first part of the carbon string
#
# carbon-namespace=pdns

#################################
# carbon-ourname	If set, overrides our reported hostname for carbon stats
#
# carbon-ourname=

#################################
# carbon-server	If set, send metrics in carbon (graphite) format to this server IP address
#
# carbon-server=

#################################
# chroot	If set, chroot to this directory for more security
#
# chroot=

#################################
# config-dir	Location of configuration directory (pdns.conf)
#
# config-dir=/etc/powerdns

#################################
# config-name	Name of this virtual configuration - will rename the binary image
#
# config-name=

#################################
# consistent-backends	Assume individual zones are not divided over backends. Send only ANY lookup operations to the backend to reduce the number of lookups
#
# consistent-backends=yes

#################################
# control-console	Debugging switch - don't use
#
# control-console=no

#################################
# daemon	Operate as a daemon
#
# daemon=no

#################################
# default-api-rectify	Default API-RECTIFY value for zones
#
# default-api-rectify=yes

#################################
# default-ksk-algorithm	Default KSK algorithm
#
# default-ksk-algorithm=ecdsa256

#################################
# default-ksk-size	Default KSK size (0 means default)
#
# default-ksk-size=0

#################################
# default-publish-cdnskey	Default value for PUBLISH-CDNSKEY
#
# default-publish-cdnskey=

#################################
# default-publish-cds	Default value for PUBLISH-CDS
#
# default-publish-cds=

#################################
# default-soa-content	Default SOA content
#
# default-soa-content=a.misconfigured.dns.server.invalid hostmaster.@ 0 10800 3600 604800 3600
default-soa-content=marte.umsa.bo jhonny.umsa.bo 2022041901 10800 3600 604800 3600

#################################
# default-soa-edit	Default SOA-EDIT value
#
# default-soa-edit=

#################################
# default-soa-edit-signed	Default SOA-EDIT value for signed zones
#
# default-soa-edit-signed=

#################################
# default-ttl	Seconds a result is valid if not set otherwise
#
# default-ttl=3600

#################################
# default-zsk-algorithm	Default ZSK algorithm
#
# default-zsk-algorithm=

#################################
# default-zsk-size	Default ZSK size (0 means default)
#
# default-zsk-size=0

#################################
# direct-dnskey	Fetch DNSKEY, CDS and CDNSKEY RRs from backend during DNSKEY or CDS/CDNSKEY synthesis
#
# direct-dnskey=no

#################################
# disable-axfr	Disable zonetransfers but do allow TCP queries
#
disable-axfr=no

#################################
# disable-axfr-rectify	Disable the rectify step during an outgoing AXFR. Only required for regression testing.
#
# disable-axfr-rectify=no

#################################
# disable-syslog	Disable logging to syslog, useful when running inside a supervisor that logs stdout
#
disable-syslog=no

#################################
# distributor-threads	Default number of Distributor (backend) threads to start
#
# distributor-threads=3

#################################
# dname-processing	If we should support DNAME records
#
# dname-processing=no

#################################
# dnssec-key-cache-ttl	Seconds to cache DNSSEC keys from the database
#
# dnssec-key-cache-ttl=30

#################################
# dnsupdate	Enable/Disable DNS update (RFC2136) support. Default is no.
#
# dnsupdate=no

#################################
# domain-metadata-cache-ttl	Seconds to cache zone metadata from the database
#
# domain-metadata-cache-ttl=

#################################
# edns-cookie-secret	When set, set a server cookie when responding to a query with a Client cookie (in hex)
#
# edns-cookie-secret=

#################################
# edns-subnet-processing	If we should act on EDNS Subnet options
#
# edns-subnet-processing=no

#################################
# enable-lua-records	Process LUA records for all zones (metadata overrides this)
#
# enable-lua-records=no

#################################
# entropy-source	If set, read entropy from this file
#
# entropy-source=/dev/urandom

#################################
# expand-alias	Expand ALIAS records
#
# expand-alias=no

#################################
# forward-dnsupdate	A global setting to allow DNS update packages that are for a Slave zone, to be forwarded to the master.
#
# forward-dnsupdate=yes

#################################
# forward-notify	IP addresses to forward received notifications to regardless of master or slave settings
#
# forward-notify=

#################################
# guardian	Run within a guardian process
#
# guardian=no

#################################
# include-dir	Include *.conf files from this directory
#
# include-dir=
include-dir=/etc/powerdns/pdns.d

#################################
# launch	Which backends to launch and order to query them in
#
# launch=
launch=

#################################
# load-modules	Load this module - supply absolute or relative path
#
# load-modules=

#################################
# local-address	Local IP addresses to which we bind
#
# local-address=0.0.0.0, ::

#################################
# local-address-nonexist-fail	Fail to start if one or more of the local-address's do not exist on this server
#
# local-address-nonexist-fail=yes

#################################
# local-port	The port on which we listen
#
# local-port=53

#################################
# log-dns-details	If PDNS should log DNS non-erroneous details
#
# log-dns-details=no

#################################
# log-dns-queries	If PDNS should log all incoming DNS queries
#
# log-dns-queries=no
log-dns-queries=yes

#################################
# log-timestamp	Print timestamps in log lines
#
log-timestamp=yes

#################################
# logging-facility	Log under a specific facility
#
# logging-facility=

#################################
# loglevel	Amount of logging. Higher is more. Do not set below 3
#
# loglevel=4
loglevel=5

#################################
# lua-axfr-script	Script to be used to edit incoming AXFRs
#
# lua-axfr-script=

#################################
# lua-dnsupdate-policy-script	Lua script with DNS update policy handler
#
# lua-dnsupdate-policy-script=

#################################
# lua-health-checks-expire-delay	Stops doing health checks after the record hasn't been used for that delay (in seconds)
#
# lua-health-checks-expire-delay=3600

#################################
# lua-health-checks-interval	LUA records health checks monitoring interval in seconds
#
# lua-health-checks-interval=5

#################################
# lua-prequery-script	Lua script with prequery handler (DO NOT USE)
#
# lua-prequery-script=

#################################
# lua-records-exec-limit	LUA records scripts execution limit (instructions count). Values <= 0 mean no limit
#
# lua-records-exec-limit=1000

#################################
# master	Act as a primary
#
# master=no
master=yes

#################################
# max-cache-entries	Maximum number of entries in the query cache
#
# max-cache-entries=1000000

#################################
# max-ent-entries	Maximum number of empty non-terminals in a zone
#
# max-ent-entries=100000

#################################
# max-generate-steps	Maximum number of $GENERATE steps when loading a zone from a file
#
# max-generate-steps=0

#################################
# max-include-depth	Maximum number of nested $INCLUDE directives while processing a zone file
#
# max-include-depth=20

#################################
# max-nsec3-iterations	Limit the number of NSEC3 hash iterations
#
# max-nsec3-iterations=100

#################################
# max-packet-cache-entries	Maximum number of entries in the packet cache
#
# max-packet-cache-entries=1000000

#################################
# max-queue-length	Maximum queuelength before considering situation lost
#
# max-queue-length=5000

#################################
# max-signature-cache-entries	Maximum number of signatures cache entries
#
# max-signature-cache-entries=

#################################
# max-tcp-connection-duration	Maximum time in seconds that a TCP DNS connection is allowed to stay open.
#
# max-tcp-connection-duration=0

#################################
# max-tcp-connections	Maximum number of TCP connections
#
# max-tcp-connections=20

#################################
# max-tcp-connections-per-client	Maximum number of simultaneous TCP connections per client
#
# max-tcp-connections-per-client=0

#################################
# max-tcp-transactions-per-conn	Maximum number of subsequent queries per TCP connection
#
# max-tcp-transactions-per-conn=0

#################################
# module-dir	Default directory for modules
#


#################################
# negquery-cache-ttl	Seconds to store negative query results in the QueryCache
#
# negquery-cache-ttl=60

#################################
# no-shuffle	Set this to prevent random shuffling of answers - for regression testing
#
# no-shuffle=off

#################################
# non-local-bind	Enable binding to non-local addresses by using FREEBIND / BINDANY socket options
#
# non-local-bind=no

#################################
# only-notify	Only send AXFR NOTIFY to these IP addresses or netmasks
#
# only-notify=0.0.0.0/0,::/0

#################################
# outgoing-axfr-expand-alias	Expand ALIAS records during outgoing AXFR
#
# outgoing-axfr-expand-alias=no

#################################
# overload-queue-length	Maximum queuelength moving to packetcache only
#
# overload-queue-length=0

#################################
# prevent-self-notification	Don't send notifications to what we think is ourself
#
# prevent-self-notification=yes

#################################
# primary	Act as a primary
#
# primary=no
primary=yes

#################################
# proxy-protocol-from	A Proxy Protocol header is only allowed from these subnets, and is mandatory then too.
#
# proxy-protocol-from=

#################################
# proxy-protocol-maximum-size	The maximum size of a proxy protocol payload, including the TLV values
#
# proxy-protocol-maximum-size=512

#################################
# query-cache-ttl	Seconds to store query results in the QueryCache
#
# query-cache-ttl=20

#################################
# query-local-address	Source IP addresses for sending queries
#
# query-local-address=0.0.0.0 ::

#################################
# query-logging	Hint backends that queries should be logged
#
# query-logging=no
query-logging=yes

#################################
# queue-limit	Maximum number of milliseconds to queue a query
#
# queue-limit=1500

#################################
# receiver-threads	Default number of receiver threads to start
#
# receiver-threads=1

#################################
# resolver	Use this resolver for ALIAS and the internal stub resolver
#
# resolver=no

#################################
# retrieval-threads	Number of AXFR-retrieval threads for slave operation
#
# retrieval-threads=2

#################################
# reuseport	Enable higher performance on compliant kernels by using SO_REUSEPORT allowing each receiver thread to open its own socket
#
# reuseport=no

#################################
# rng	Specify the random number generator to use. Valid values are auto,sodium,openssl,getrandom,arc4random,urandom.
#
# rng=auto

#################################
# secondary	Act as a secondary
#
# secondary=no

#################################
# secondary-do-renotify	If this secondary should send out notifications after receiving zone transfers from a primary
#
# secondary-do-renotify=no

#################################
# security-poll-suffix	Zone name from which to query security update notifications
#
# security-poll-suffix=secpoll.powerdns.com.

#################################
# send-signed-notify	Send TSIG secured NOTIFY if TSIG key is configured for a zone
#
# send-signed-notify=yes

#################################
# server-id	Returned when queried for 'id.server' TXT or NSID, defaults to hostname - disabled or custom
#
# server-id=

#################################
# setgid	If set, change group id to this gid for more security
#
# setgid=

#################################
# setuid	If set, change user id to this uid for more security
#
# setuid=

#################################
# signing-threads	Default number of signer threads to start
#
# signing-threads=3

#################################
# slave	Act as a secondary
#
# slave=no
slave=no

#################################
# slave-cycle-interval	Schedule slave freshness checks once every .. seconds
#
slave-cycle-interval=3600

#################################
# slave-renotify	If we should send out notifications for secondaried updates
#
# slave-renotify=no

#################################
# socket-dir	Where the controlsocket will live, /var/run/pdns when unset and not chrooted. Set to the RUNTIME_DIRECTORY environment variable when that variable has a value (e.g. under systemd).
#
# socket-dir=

#################################
# superslave	Act as a autosecondary
#
# superslave=no

#################################
# svc-autohints	Transparently fill ipv6hint=auto ipv4hint=auto SVC params with AAAA/A records for the target name of the record (if within the same zone)
#
# svc-autohints=no

#################################
# tcp-control-address	If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-address=

#################################
# tcp-control-port	If set, PowerDNS can be controlled over TCP on this address
#
# tcp-control-port=53000

#################################
# tcp-control-range	If set, remote control of PowerDNS is possible over these networks only
#
# tcp-control-range=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12, ::1/128, fe80::/10

#################################
# tcp-control-secret	If set, PowerDNS can be controlled over TCP after passing this secret
#
# tcp-control-secret=

#################################
# tcp-fast-open	Enable TCP Fast Open support on the listening sockets, using the supplied numerical value as the queue size
#
# tcp-fast-open=0

#################################
# tcp-idle-timeout	Maximum time in seconds that a TCP DNS connection is allowed to stay open while being idle
#
# tcp-idle-timeout=5

#################################
# traceback-handler	Enable the traceback handler (Linux only)
#
# traceback-handler=yes

#################################
# trusted-notification-proxy	IP address of incoming notification proxy
#
# trusted-notification-proxy=

#################################
# udp-truncation-threshold	Maximum UDP response size before we truncate
#
# udp-truncation-threshold=1232

#################################
# upgrade-unknown-types	Transparently upgrade known TYPExxx records. Recommended to keep off, except for PowerDNS upgrades until data sources are cleaned up
#
# upgrade-unknown-types=no

#################################
# version-string	PowerDNS version in packets - full, anonymous, powerdns or custom
#
# version-string=full

#################################
# webserver	Start a webserver for monitoring (api=yes also enables the HTTP listener)
#
# webserver=no

#################################
# webserver-address	IP Address of webserver/API to listen on
#
# webserver-address=127.0.0.1

#################################
# webserver-allow-from	Webserver/API access is only allowed from these subnets
#
# webserver-allow-from=127.0.0.1,::1

#################################
# webserver-hash-plaintext-credentials	Whether to hash passwords and api keys supplied in plaintext, to prevent keeping the plaintext version in memory at runtime
#
# webserver-hash-plaintext-credentials=no

#################################
# webserver-loglevel	Amount of logging in the webserver (none, normal, detailed)
#
# webserver-loglevel=normal

#################################
# webserver-max-bodysize	Webserver/API maximum request/response body size in megabytes
#
# webserver-max-bodysize=2

#################################
# webserver-password	Password required for accessing the webserver
#
# webserver-password=

#################################
# webserver-port	Port of webserver/API to listen on
#
# webserver-port=8081

#################################
# webserver-print-arguments	If the webserver should print arguments
#
# webserver-print-arguments=no

#################################
# write-pid	Write a PID file
#
# write-pid=yes

#################################
# xfr-cycle-interval	Schedule primary/secondary SOA freshness checks once every .. seconds
#
# xfr-cycle-interval=60

#################################
# xfr-max-received-mbytes	Maximum number of megabytes received from an incoming XFR
#
# xfr-max-received-mbytes=100

#################################
# zone-cache-refresh-interval	Seconds to cache list of known zones
#
# zone-cache-refresh-interval=300

#################################
# zone-metadata-cache-ttl	Seconds to cache zone metadata from the database
#
# zone-metadata-cache-ttl=60

