Winfried
Am 23. Juli 2021 13:32:39 MESZ schrieb Yannis via Pdns-users
<pdns-users@mailman.powerdns.com>:
hello,
We're using dnsdist (1.5.1 on Ubuntu 20.04, 16 cores, 32GB RAM) as
a DoH
proxy/LB with normal DNS/53 resolvers as backend. This is a test
installation and we're trying to figure out the performance. It can
barely handle 1.5k QpS, which I consider pretty low (each backend
resolver can easily handle >60k QpS). It seems that each time the
queries rate is higher than ~1.5k, all backend servers are marked
"DOWN"
until the rate goes below 1k. I understand that dnsdist marks the
servers down because it's not receiving a response on its
healthcheck
query and I wonder why.
Should I increase "checkTimeout" and "checkInterval"? Should I use a
large number for "sockets"? Am I missing other tuning options or
maybe
something more important?
Here's the relevant config (addresses, etc changed)
setLocal('0.0.0.0:5300')
addLocal('[::1]:5300')
controlSocket('local_public_address:xxxx')
setKey("XXX")
setConsoleACL('x.x.x.x/24')
NotRule(MaxQPSRule(50000))
setMaxUDPOutstanding(65535)
setMaxTCPClientThreads(128)
setMaxTCPQueuedConnections(10000)
setMaxTCPConnectionDuration(600)
PrimaryCache = newPacketCache(30000000, { keepStaleData=true,
maxTTL=86400, minTTL=0, numberOfShards=8, maxNegativeTTL=600,
staleTTL=60 })
getPool(""):setCache(PrimaryCache)
addDOHLocal('10.2.3.4', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
addDOHLocal('10.2.3.4', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
addDOHLocal('10.2.3.4', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
addDOHLocal('10.2.3.4', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
addDOHLocal('2001:DB8::443', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
addDOHLocal('2001:DB8::443', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
addDOHLocal('2001:DB8::443', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
addDOHLocal('2001:DB8::443', 'cert.pem', 'key.key', "/dns-query", {
reusePort=true, minTLSVersion='tls1.2' })
newServer({address="2001:DB8::62", qps=10000})
newServer({address="2001:DB8::61", qps=10000})
newServer({address="2001:DB8::60", qps=10000})
newServer({address="2001:DB8::59", qps=10000})
newServer({address="2001:DB8::58", qps=10000})
newServer({address="2001:DB8::57", qps=10000})
newServer({address="2001:DB8::56", qps=10000})
newServer({address="2001:DB8::55", qps=10000})
newServer({address="2001:DB8::48", qps=10000})
newServer({address="2001:DB8::47", qps=10000})
newServer({address="10.10.10.62", qps=10000})
newServer({address="10.10.10.61", qps=10000})
newServer({address="10.10.10.60", qps=10000})
newServer({address="10.10.10.59", qps=10000})
newServer({address="10.10.10.58", qps=10000})
newServer({address="10.10.10.57", qps=10000})
newServer({address="10.10.10.56", qps=10000})
newServer({address="10.10.10.55", qps=10000})
newServer({address="10.10.10.48", qps=10000})
newServer({address="10.10.10.47", qps=10000})
setServerPolicy(roundrobin)
thanks in advance, I'd appreciate any input :)
------------------------------------------------------------------------
Pdns-users mailing list
Pdns-users@mailman.powerdns.com
https://mailman.powerdns.com/mailman/listinfo/pdns-users
<https://mailman.powerdns.com/mailman/listinfo/pdns-users>
_______________________________________________
Pdns-users mailing list
Pdns-users@mailman.powerdns.com
https://mailman.powerdns.com/mailman/listinfo/pdns-users
