Rob Studdert wrote:
On 29 Jan 2006 at 20:13, Gonz wrote:


I'm very disappointed with the viewfinder/base misalignment. This means that you have to level the camera by looking through the viewfinder at some reference (and ignore the viewfinder/sensor mis-alignment for now), and not depend on the tripod being level. This is unacceptable, one should not have to take a level with them to make their camera level, it should be enough to get a rough leveling using the levels built into the tripod head. The nicer tripods have two levels orthogonal to each other, which should be sufficient to get a pretty decent leveling. This defect is a real pain and should not happen in a camera like the D, which is currently the DSLR standard bearer from Pentax. I'm wondering whether this is happening pretty much on all *D cameras, or I have a defective one. If you look at the design of the *D, the top, which is what the viewfinder is aligned with, is definitely not parallel with the base, which leads me to believe that all *D cameras have this problem.


The base should be your reference, what were you referring to when you mentioned alignment WRT the "top"? Looking at various pics of the chassis I doubt very much that the sensor could be misaligned as much as 1 degree given the design and the apparent fixing points and guides. However the prism alignment is likely the source of your woes, not great but understandable, it only has to be rotated slightly to tilt the view. The prism is point clamped in a plastic yoke, it should be able to be aligned by a tech pretty easily.


The base is my reference. When I level the base, i.e. its attached very firmly to my tripod which has been leveled carefully, the viewfinder is not level with respect to another level reference, i.e. a grid on a wall perpendicular to my camera.

If I take a picture, the sensor is not level with the grid either. So apparently both the viewfinder and the sensor are askew.



Rob Studdert
HURSTVILLE AUSTRALIA
Tel +61-2-9554-4110
UTC(GMT)  +10 Hours
[EMAIL PROTECTED]
http://members.ozemail.com.au/~distudio/publications/
Pentax user since 1986, PDMLer since 1998


Reply via email to