Scratch that! (I broke my po' little FTP server with the PEF files.) ;-) They're all in: http://www.donsauction.com/pdml/28vsDA/PEFs.zip
Don > -----Original Message----- > From: Don Sanderson [mailto:[EMAIL PROTECTED] > Sent: Monday, April 04, 2005 8:48 PM > To: [email protected] > Subject: RE: The DA retested and loved again! > > > Here are the left edges at 100%: > http://www.donsauction.com/pdml/28vsDA/LeftEdge.htm > > Looks like the DA outdid the M28 by a bit on the edge. > > The RAWs are uploading, should be done in about a week! ;-) > > They *will* be: > http://www.donsauction.com/pdml/28vsDA/DA_4.0.PEF > http://www.donsauction.com/pdml/28vsDA/DA_5.6.PEF > http://www.donsauction.com/pdml/28vsDA/M_3.5.PEF > http://www.donsauction.com/pdml/28vsDA/M_5.6.PEF > > 52MB total. (Do RAW files zip well?) > > > Don > > > -----Original Message----- > > From: Rob Studdert [mailto:[EMAIL PROTECTED] > > Sent: Monday, April 04, 2005 8:24 PM > > To: [email protected] > > Subject: RE: The DA retested and loved again! > > > > > > On 4 Apr 2005 at 20:17, Don Sanderson wrote: > > > > > These were shot as RAW and the same settings used for > > > each conversion. > > > > Why I asked about that was that the sharpening seemed a little > aggressive. > > > > > I then cropped, enlarged and saved for web, also keeping > > > settings the same. > > > To crop I used the method Jostein used yesterday, set > > > rulers to pixels, draw a crop box correctly sized and > > > then align it. > > > > Just a tip, if you start recording an "action" when you make your > > first crop > > you can then apply that "action" to each subsequent image, makes > > producing > > uniform crops/post processing really easy. > > > > > I can put the RAW files up for d'load if you'd like to > > > play with them. > > > > That would be great, thanks. > > > > Cheers, > > > > > > Rob Studdert > > HURSTVILLE AUSTRALIA > > Tel +61-2-9554-4110 > > UTC(GMT) +10 Hours > > [EMAIL PROTECTED] > > http://members.ozemail.com.au/~distudio/publications/ > > Pentax user since 1986, PDMLer since 1998 > > >
