Hello John, On IOS the auto join is automatically enabled on open SSID (Guest SSID). That’s the feature that you want because when PF sends the disconnect message to your Aruba controller we expect the client to connect right away after the disconnection to apply the production VLAN.
Could you put the output of the command there when you do a “Re-evaluate access” on a device already connected on the guest: radsniff -x -p 3799 Thanks, Ludovic Zammit [email protected] <mailto:[email protected]> :: +1.514.447.4918 (x145) :: www.inverse.ca <http://www.inverse.ca/> Inverse inc. :: Leaders behind SOGo (http://www.sogo.nu <http://www.sogo.nu/>) and PacketFence (http://packetfence.org <http://packetfence.org/>) > On May 6, 2020, at 9:52 AM, John Sayce via PacketFence-users > <[email protected]> wrote: > > I’m not totally sure when this problem started and I suspect it’s unrelated > to packetfence, however I hoped you might know the answer. > > We have out of band enforcement for an unsecured (guest) wireless network > with a captive portal. We’re running packetfence 6.5.1, our wireless uses an > Aruba 7010 and Aruba 315 access points. > > When iphone / IOS users connect to my guest network and authenticate via the > captive portal the devices don’t appear to be disconnected from the network > in order to be put into the right VLAN. There’s no errors in the logs and I > believe everything is working fine. I believe this is a new feature of IOS > and I was hoping someone had experienced this and had some advice. If I > change the “Ask to Join Networks” and “Auto-Join Hotspot” settings I can > sometimes get it to work, however despite reading a number of descriptions I > can’t say I really understand what the “AutoJoin Hotspot” setting is for. > And I might be mistaken but it seems to work with certain settings but when I > forget the network and reconnect again it no longer works. > > Does anyone have any guidance? > > Thanks > John Sayce > > _______________________________________________ > PacketFence-users mailing list > [email protected] > <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/packetfence-users > <https://lists.sourceforge.net/lists/listinfo/packetfence-users>
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
