Hard to say what's going on based on this log fragment. Can you put the full logs from both nodes somewhere?
On Sun, Aug 3, 2008 at 11:18, David Riccitelli <[EMAIL PROTECTED]> wrote: > Hello there, > Can somebody help me with this problem? > I have 2 identical nodes, node #1 and node #2. Nodes are installed with > CentOS 5 and the current version of heartbeat (2.1.3) and pacemaker (0.6.5). > Each node has 2 network ports bonded together (mode 1). bonding is > configured and working fine. > The nodes have one resource configured. And I must say everything works > fine. All the tests I'm running show perfect failovers, but one test: > 1. node #1 has the resource, node #2 is waiting, > 2. I remove both network cables from node #1, > 3. node #2 doesn't sense node #1 anymore and believes it is dead, > 4. node #2 brings up the resource, > 5. then I put back node #1 in the network - I believe the nodes should see > themselves and one of the two will leave the resource, > 6. node #1 and node #2 see each other and start counting election votes, > but for an indefinite time and the resource is active on two nodes at the > same time: > logs (same on both nodes - this pattern repeats forever, until heartbeat is > manually stopped on one of the nodes): _______________________________________________ Pacemaker mailing list [email protected] http://list.clusterlabs.org/mailman/listinfo/pacemaker
