Just two Last ideas. Audio is turned on in BIOS? Have a Look at dmesg. Could be 
an Problem with Audio drivers

Julian

Sent from iPhone

Am 18.01.2013 um 18:04 schrieb Brett <[email protected]>:

> Thanks for the response. I do have all of those set appropriately. Audio is 
> maxed. Remote audio is enabled, it lets you know in the mixer when it is not 
> and the rdesktop is set to audio=yes.
> 
> I assume it is something simple and stupid since I have tried multiple 
> hardware types. I will keep going through iterations. If I find a fix I will 
> report back.
> 
> Thanks, Brett
> 
> On Fri, Jan 18, 2013 at 7:48 AM, Julian Ohm <[email protected]> wrote:
>> Hi Brett,
>> 
>>  
>> 
>> i also had a problem with sound.
>> 
>>  
>> 
>> 1.       Do you have enabled remoteaudio?
>> 
>> 2.       Do you see remoteaudio enabled and volume set to high in the 
>> rdesktop?
>> 
>> 3.       Rdesktop is configured in otc manager to support audio?
>> 
>>  
>> 
>> Open xterm or something like that or change to local console on the client 
>> (using ctrl+alt+f1) get root access (password if not changed 0pen%TC ). Have 
>> a look at the output of “ps –ax | grep rdesktop”
>> 
>> You should see something like that:
>> 
>> [….] /opt/rdesktop/bin/rdesktop –r sound:local
>> 
>> It’s possible that in this line some more arguments are listed. But it’s 
>> important that –r sound:local is on that line
>> 
>>  
>> 
>> Wich Version of otc and rdesktop do you use?
>> 
>>  
>> 
>> Best regards
>> 
>> Mit freundlichem Gruß
>> 
>>  
>> 
>> Julian Ohm
>> 
>>  
>> 
>> ------------------------------------------
>> 
>>  
>> 
>> Haftungsbeschränkungen/Disclaimer
>> 
>>  
>> 
>> Diese Nachricht enthält vertrauliche Informationen und ist ausschließlich
>> 
>> für den Adressaten bestimmt. Der Gebrauch durch Dritte ist verboten. Das
>> 
>> Unternehmen ist nicht verantwortlich für die ordnungsgemäße, vollständige
>> 
>> oder verzögerungsfreie Übertragung dieser Nachricht. Diese Hinweise gelten
>> 
>> auch für zukünftige Nachrichten.
>> 
>> This message may contain confidential information and is intended solely
>> 
>> for the use by the addressee. Use of this communication by others is
>> 
>> prohibited. The Company is neither liable for the proper and complete
>> 
>> transmission of the message nor for the delay in its receipt.
>> 
>>  
>> 
>> Von: Brett [mailto:[email protected]] 
>> Gesendet: Freitag, 18. Januar 2013 15:01
>> An: [email protected]
>> Betreff: Re: [openthinclient-user] No sound on OTC
>> 
>>  
>> 
>> Thanks for the response. I did a poor job of explaining. I bought the hp 
>> clients just yesterday. They were admin locked and as of my post I had not 
>> been able to get into the thinconnect settings to be able to use 
>> thinconnect. However, I did PXE boot them to OTC.
>> 
>> Subsequently I was able to just flash the devices back to a defaullt state. 
>> So, with thinconnect I have audioand video. With OTC I have video only, but 
>> the video streams much better than with thinconnect.
>> 
>> Most of the training we stream is really audio with some graphics. This 
>> makes the thinconnect an option. That said, I would prefer to use OTC.
>> 
>> So, I still would like to find oht why I dont have audio with OTC.
>> 
>> Thanks again for the response.
>> 
>> On Jan 18, 2013 2:59 AM, "Jan Magnusson" <[email protected]> wrote:
>> 
>> Hi Brett,
>> 
>>  
>> 
>> There must be some misunderstanding on what OTC is supposed to accomplish.
>> 
>>  
>> 
>> It's basically only a boot server, not a thin client server. It boots your 
>> old diskless pcs over the network with a Linux (some ancient Ubuntu 6.04 I 
>> think) version. Then you connect to some separate client server.
>> 
>>  
>> 
>> You don't need the whole OTC if you got all your clients already running HP 
>> Thinconnect.
>> 
>>  
>> 
>> b.r.
>> 
>> Jan
>> 
>>  
>> 
>> From: Brett [mailto:[email protected]] 
>> Sent: Friday, 18 January, 2013 03:39
>> To: [email protected]
>> Subject: [openthinclient-user] No sound on OTC
>> 
>>  
>> 
>> I am trying to get the sound to work on OTC. I see quite a few posts, very 
>> few resolutions. I previously used 2x TCS, but they have dropped support for 
>> that product and I have no need for application publishing or the more 
>> substantial cost. . 
>> 
>>  
>> 
>> I have installed OTC Server on a Windows Server 2012 HP Proliant G4 and all 
>> seems good, except audio. Sound plays fine from a Win 7 machine RDP to the 
>> server, just not on an OTCclient. The client machines are a mix of old pc's 
>> with a number of Dell GX260's and HP t5520 Thin Clients running HP 
>> Thinconnect. None of them play audio from the remote server.
>> 
>>  
>> 
>> We do need audio for training videos and they all require digital 
>> certificates for each user account on the server. So, I could install one 
>> computer just for watching training videos and have Win OS on it just to 
>> remote to the Server and play training, but I would rather users be able to 
>> have audio.
>> 
>>  
>> 
>> I've read mixed reports on support for sound with OTC. I have enabled sound 
>> in the rdesktop application settings and on the Win server. When playing 
>> audio the mixer on the server shows audio modulation.
>> 
>>  
>> 
>> So, is it possible to play audio with our setup? If so, where should I look 
>> for the problem? Should I purchase TC hardware instead of old pc's? What we 
>> have played audio with 2X TCS, but as mentioned, we don't have that option 
>> now. 
>> 
>>  
>> 
>> Thanks for the help.
>> 
>> 
>> ------------------------------------------------------------------------------
>> Master HTML5, CSS3, ASP.NET, MVC, AJAX, Knockout.js, Web API and
>> much more. Get web development skills now with LearnDevNow -
>> 350+ hours of step-by-step video tutorials by Microsoft MVPs and experts.
>> SALE $99.99 this month only -- learn more at:
>> http://p.sf.net/sfu/learnmore_122812
>> _______________________________________________
>> The Open Source Thin Client Solution http://openthinclient.org
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
>> 
>> 
>> ------------------------------------------------------------------------------
>> Master HTML5, CSS3, ASP.NET, MVC, AJAX, Knockout.js, Web API and
>> much more. Get web development skills now with LearnDevNow -
>> 350+ hours of step-by-step video tutorials by Microsoft MVPs and experts.
>> SALE $99.99 this month only -- learn more at:
>> http://p.sf.net/sfu/learnmore_122812
>> _______________________________________________
>> The Open Source Thin Client Solution http://openthinclient.org
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
> 
> ------------------------------------------------------------------------------
> Master HTML5, CSS3, ASP.NET, MVC, AJAX, Knockout.js, Web API and
> much more. Get web development skills now with LearnDevNow -
> 350+ hours of step-by-step video tutorials by Microsoft MVPs and experts.
> SALE $99.99 this month only -- learn more at:
> http://p.sf.net/sfu/learnmore_122812
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user
------------------------------------------------------------------------------
Master HTML5, CSS3, ASP.NET, MVC, AJAX, Knockout.js, Web API and
much more. Get web development skills now with LearnDevNow -
350+ hours of step-by-step video tutorials by Microsoft MVPs and experts.
SALE $99.99 this month only -- learn more at:
http://p.sf.net/sfu/learnmore_122812
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
[email protected]
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Reply via email to