> I am doing some basic testing with ldap with this command.
>
> ldclt \
> -a 400 \
> -H ldap://x.x.x.x:xxxx \
> -e bindeach,bindonly,close \
> -D "uid=test,dc=me,dc=local" \
> -w yyyyyy \
> -n 1
>
> I was testing this on two container test environments. Both are running
> with ~500MB, 1 core.
>
> 1. alpine - slapd 2.6.3, mdb still with default slapd.conf
> ldclt[5594]: Average rate: 12627.00/thr (1262.70/sec), total: 12627
> ldclt[5594]: Average rate: 0.00/thr ( 0.00/sec), total: 0
> ldclt[5594]: All threads are dead - exit.
>
> 2. alpine - slapd 2.6.6, mdb configured with acl's, ssl, modules etc.
> ldclt[8900]: Average rate: 1495.00/thr ( 149.50/sec), total: 1495
> ldclt[8900]: Average rate: 1498.00/thr ( 149.80/sec), total: 1498
> ldclt[8900]: Average rate: 1490.00/thr ( 149.00/sec), total: 1490
>
> What should I be expecting from this? It looks like maybe slapd of 1. is
> not 100% with this 'threads are dead' messages. While slapd of 2. with
> 150 req/sec is that to be expected normal?
Doing a search on self gives me values that I would expect more (2 being faster
than 1)
-e esearch \
-f '(&(objectClass=xxxx)(cn=test))' \
-D "cn=test,dc=me,dc=local" \
-b "cn=test,dc=me,dc=local" \
1.
ldclt[8415]: Average rate: 54358.00/thr (5435.80/sec), total: 54358
ldclt[8415]: Average rate: 53850.00/thr (5385.00/sec), total: 53850
ldclt[8415]: Average rate: 53957.00/thr (5395.70/sec), total: 53957
ldclt[8415]: Average rate: 54594.00/thr (5459.40/sec), total: 54594
2.
ldclt[8223]: Average rate: 90102.00/thr (9010.20/sec), total: 90102
ldclt[8223]: Average rate: 93745.00/thr (9374.50/sec), total: 93745
ldclt[8223]: Average rate: 92066.00/thr (9206.60/sec), total: 92066
ldclt[8223]: Average rate: 91523.00/thr (9152.30/sec), total: 91523
ldclt[8223]: Average rate: 96301.00/thr (9630.10/sec), total: 96301
Any ideas why these binds on 2. could be so slow?
