Jason Trupp wrote: > At this point replication of cn=config is broken and unsupported.
Eh? Not true. > > -------- Original message -------- > From: Ondřej Kuzník <[email protected]> > Date: 10/18/18 5:44 AM (GMT-06:00) > To: Michael Ströder <[email protected]> > Cc: Quanah Gibson-Mount <[email protected]>, OpenLDAP Tehnical > <[email protected]> > Subject: Re: Adding read-only consumers to a Mirror Mode Replication setup? > > On Thu, Oct 18, 2018 at 10:10:33AM +0200, Michael Ströder wrote: >> On 10/18/18 1:41 AM, Quanah Gibson-Mount wrote: >>> I've had setups with 2-node MMR on the front, and read only consumers. >>> It works just fine, as long as any given consumer only points to one >>> master. Theoretically, it's supposed to work so that consumers can point >>> to more than one master in an MMR setup, but my experience didn't match >>> that (<http://www.openldap.org/its/index.cgi/?findid=8373>). >> >> There's no config in ITS#8373. >> But you mention accesslog DB. >> Does that mean your setup used delta-syncrepl? >> If yes, does that issue also apply to normal syncrepl? > > I can see cn=config is being replicated in that ticket. It makes more > sense that the 'unwilling to perform' issue would be limited to > replicating the config (which can be more picky about its modifications) > rather than regular databases. > > That kind of setup is being used in a significant number of deployments > and by Linus' law we'd have more reports like this one. > > -- > Ondřej Kuzník > Senior Software Engineer > Symas Corporation http://www.symas.com > Packaged, certified, and supported LDAP solutions powered by OpenLDAP > -- -- Howard Chu CTO, Symas Corp. http://www.symas.com Director, Highland Sun http://highlandsun.com/hyc/ Chief Architect, OpenLDAP http://www.openldap.org/project/
