Sorry, the SATA PCIe card with marvel 9215 chip works fine. It were the
disks that were not well powered.
Best regards
Marc
On 6/23/25 19:54, Marc Lobelle via openindiana-discuss wrote:
Hello,
I need to add disks to a ZFS pool on openindiana.
On
https://docs.openindiana.org/community-hcl/components/#storage-controllers,
I found the following controller
Syba IOCrest SI-PEX40108 Marvell 88SE9215
I thus bought a controller based on this marvel chip
*
- Carte Controleur SATA III (Sata 3) PCI Express (PCI-E PCIe) vers 4
Ports SATA 6Gbps - Chipset Marvell 9215 - avec equerre Low Profile
<https://www.amazon.com.be/dp/B07M6TKF2G?ref=ppx_yo2ov_dt_b_fed_asin_title>
- SATA III (Sata 3) PCI Express (PCI-E PCIe) Controller Card to 4
SATA 6Gbps Ports - Marvell 9215 Chipset -
<https://www.amazon.com.be/dp/B07M6TKF2G?ref=ppx_yo2ov_dt_b_fed_asin_title>
I added it to my computer with two 4TB SATA SSDs.
I touched /reconfigure and rebooted.
Then I typed format to have the list of the disks, but I did not see
the two new disks. Is there something special to do to use this little
sata controller ?
Else card with which chip would you recommend; I see also cheap cards
with ASM 1061.
Thanks
Marc
_______________________________________________
openindiana-discuss mailing list
[email protected]
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
[email protected]
https://openindiana.org/mailman/listinfo/openindiana-discuss
