Good Morning
I have a USB drive Sandisk Ultra USB 3.0 64GB which mounts correctly
when plugged into a USB 2.0 port, unmounted the drive and unplugged then
plugged into USB3.0 port which failed to mount the drive, after waiting a
couple of minutes I plugged the drive into the same USB 3.0 port and it
did mount.
Jan 24 07:14:46 tesla usba: [ID 912658 kern.info] USB 2.10 device
(usb781,5581) operating at hi speed (USB 2.x) on USB 2.0 external hub:
storage@4, scsa2usb0 at bus address 7
Jan 24 07:14:46 tesla usba: [ID 349649 kern.info] USB SanDisk 3.2Gen1
0401b2f371b481650e18cefc9ac01206935a1f770a880e0db03b2e1ffdc0828ddd5e000000000000000000005842be55009e6918815581073bb00804
Jan 24 07:14:46 tesla genunix: [ID 936769 kern.info] scsa2usb0 is
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@4
Jan 24 07:14:46 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@4 (scsa2usb0) online
Jan 24 07:14:46 tesla scsi: [ID 583861 kern.info] sd10 at scsa2usb0:
target 0 lun 0
Jan 24 07:14:46 tesla genunix: [ID 936769 kern.info] sd10 is
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@4/disk@0,0
Jan 24 07:14:46 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@4/disk@0,0 (sd10)
online
Jan 24 07:15:06 tesla scsi: [ID 107833 kern.warning] WARNING:
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@4/disk@0,0 (sd10):
Jan 24 07:15:06 tesla Command failed to complete...Device is gone
Jan 24 07:15:09 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@4/disk@0,0 (sd10)
removed
Jan 24 07:15:09 tesla last message repeated 1 time
Jan 24 07:15:09 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/hub@6/storage@4 (scsa2usb0) removed
Jan 24 07:15:17 tesla usba: [ID 912658 kern.info] USB 3.20 device
(usb781,5581) operating at super speed (USB 3.x) on USB 3.1 root hub:
storage@3, scsa2usb15 at bus address 7
Jan 24 07:15:17 tesla usba: [ID 349649 kern.info] USB SanDisk 3.2Gen1
0401b2f371b481650e18cefc9ac01206935a1f770a880e0db03b2e1ffdc0828ddd5e000000000000000000005842be55009e6918815581073bb00804
Jan 24 07:15:17 tesla genunix: [ID 936769 kern.info] scsa2usb15 is
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3
Jan 24 07:15:17 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3 (scsa2usb15) online
Jan 24 07:15:17 tesla scsi: [ID 583861 kern.info] sd60 at scsa2usb15:
target 0 lun 0
Jan 24 07:15:17 tesla genunix: [ID 936769 kern.info] sd60 is
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3/disk@0,0
Jan 24 07:15:17 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3/disk@0,0 (sd60) online
Jan 24 07:15:18 tesla usba: [ID 508659 kern.notice] NOTICE: driver
scsa2usb attempting to open non-default of a USB 3.0 or newer device
through usb_pipe_open(). scsa2usb must be updated to use
usb_pipe_xopen() to work with USB device USB SanDisk 3.2Gen1.
Jan 24 07:15:18 tesla usba: [ID 691482 kern.warning] WARNING:
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3 (scsa2usb15):
Reinserted device is accessible again.
Jan 24 07:15:18 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3 (scsa2usb15) online
Jan 24 07:15:18 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3/disk@0,0 (sd60) online
Jan 24 07:15:20 tesla scsi: [ID 107833 kern.warning] WARNING:
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3/disk@0,0 (sd60):
Jan 24 07:15:20 tesla Command failed to complete...Device is gone
Jan 24 07:15:35 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3/disk@0,0 (sd60) removed
Jan 24 07:15:35 tesla last message repeated 1 time
Jan 24 07:15:35 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@3 (scsa2usb15) removed
Jan 24 07:17:30 tesla usba: [ID 691482 kern.warning] WARNING:
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0 (xhci0): Connecting device on
port 7 failed
Jan 24 07:17:31 tesla last message repeated 1 time
Jan 24 07:19:49 tesla usba: [ID 912658 kern.info] USB 2.10 device
(usb781,5581) operating at hi speed (USB 2.x) on USB 3.1 root hub:
storage@7, scsa2usb8 at bus address 7
Jan 24 07:19:49 tesla usba: [ID 349649 kern.info] USB SanDisk 3.2Gen1
0401b2f371b481650e18cefc9ac01206935a1f770a880e0db03b2e1ffdc0828ddd5e000000000000000000005842be55009e6918815581073bb00804
Jan 24 07:19:49 tesla genunix: [ID 936769 kern.info] scsa2usb8 is
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@7
Jan 24 07:19:49 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@7 (scsa2usb8) online
Jan 24 07:19:49 tesla scsi: [ID 583861 kern.info] sd25 at scsa2usb8:
target 0 lun 0
Jan 24 07:19:49 tesla genunix: [ID 936769 kern.info] sd25 is
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@7/disk@0,0
Jan 24 07:19:49 tesla genunix: [ID 408114 kern.info]
/pci@0,0/pci1022,1483@1,2/pci1b21,1142@0/storage@7/disk@0,0 (sd25) online
Kind Regards
Russell
On 2025-01-22 17:55, Stephan Althaus wrote:
On 1/22/25 15:15, russell wrote:
Hi Stephan
I have USB 3 and USB 2 ports, USB drives have been reliable on both
USB 2 and 3 but not always.
Digital cameras have only worked on USB 2 ports and then it depends
on the BE.
When I experience a problem with USB after creating a new BE, I can
usually revert to an earlier BE to access the device.
Kind Regards
Russell
Hi Russel!
We really need more technical details on what is happening, concrete
error messages and logs and such..
Regards,
Stephan
_______________________________________________
openindiana-discuss mailing list
[email protected]
https://openindiana.org/mailman/listinfo/openindiana-discuss
