I prefer this solution. Now to note it. Thanks :) On Sun, Jun 26, 2022 at 6:52 PM Gary Mills <[email protected]> wrote:
> On Sun, Jun 26, 2022 at 11:46:25PM +0200, Marc Lobelle wrote: > > > > In tried to replace the ssd of my notebook running openindiana (120G) by > a > > bigger one (1T). > > > > I first copied the small ssd on the big one: I connected the big disk on > a > > usb adapter, ran format to identify the two devices then > > > > dd if=/dev/rdsk/c6t0d0p0 of=/dev/rdsk/c4t0d0p0 bs=2048K > > A much better way is to use the ZFS mirroring capability. The command > is: > > # zpool attach -f ... ... ... > > You could also use: > > # zpool replace [-f] pool device [new_device] > > Wait for the resilver to complete. The result will be a two-way > mirror, in the case of the first command. Then, detach the small SSD > and try booting from the big one, again for the first command. The > second command does it all in one operation. The manual will tell > you more than I can. > > Note that I've only done this with both disks permanently installed > on a desktop. I don't know if it even works with USB disks. > > > -- > -Gary Mills- -refurb- -Winnipeg, Manitoba, > Canada- > > _______________________________________________ > openindiana-discuss mailing list > [email protected] > https://openindiana.org/mailman/listinfo/openindiana-discuss > _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
