On 4/10/22 04:13, Judah Richardson wrote:
Finally got around to looking into this ongoing issue.
On Thu, Dec 23, 2021 at 2:28 PM Judah Richardson <[email protected]>
wrote:
On Thu, Dec 23, 2021 at 11:36 AM [email protected] <[email protected]> wrote:
Do you still have access to a console when the system is 'unreachable'
over the network ?
Yes, I do.
If you still have a text console on the system which became unreachable,
perhaps you could check before rebooting whether you can see any errors on
the NIC.
For example using:
# dladm show-link -s rge0
When I run the above command on system with a e1000g0 interface, it
prints IERRORS / OERRORS in the show-link -s e1000g0 output, so hopefully
it also prints those statistics for rge0.
Doesn't show any errors on this end.
Also maybe there are error messages in the /var/adm/messages related to
rge0.
No errors there either.
Seems to be a problem within the OS itself, perhaps in relation to that
particular NIC.
These are good ideas, thanks. I'll try them next time it happens and then
report back.
Regards,
David Stes
----- Op 22 dec 2021 om 8:56 schreef Judah Richardson
[email protected]:
On Tue, Dec 21, 2021 at 2:06 AM Joshua M. Clulow <[email protected]>
wrote:
On Mon, 20 Dec 2021 at 22:26, Judah Richardson
<[email protected]> wrote:
On Tue, Dec 21, 2021 at 12:23 AM Joshua M. Clulow via
openindiana-discuss <[email protected]> wrote:
Any logs or anything like that in particular I should take a look
at?
What driver is in use?
How do I determine this?
What do you see in "ipadm show-addr"
$ sudo ipadm show-addr
Password:
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
rge0/_b dhcp ok 192.168.0.71/24
lo0/v6 static ok ::1/128
rge0/_a addrconf ok fe80::7a45:c4ff:fe14:10a4/10
and "dladm show-ether"?
~$ sudo dladm show-ether
LINK PTYPE STATE AUTO SPEED-DUPLEX
PAUSE
rge0 current up no 1G-f
none
By
default, NICs are named with the driver you're using; e.g., "bge0" is
an instance of the "bge" driver.
What model of NIC is it?
It's an onboard Realtek NIC.
If you "pkg install diagnostic/pci" you should be able to:
/usr/lib/pci/pcieadm show-devs -o bdf,vid,did,driver,vendor,device
$ sudo /usr/lib/pci/pcieadm show-devs -o
bdf,vid,did,driver,vendor,device
BDF VID DID DRIVER VENDOR DEVICE
0/0/0 8086 100 -- Intel Corporation 2nd
Generation Core Processor Family DRAM Controller
0/2/0 8086 102 i9150 Intel Corporation 2nd
Generation Core Processor Family Integrated Graphics Controller
0/16/0 8086 1c3a -- Intel Corporation 6
Series/C200 Series Chipset Family MEI Controller #1
0/1a/0 8086 1c2d ehci0 Intel Corporation 6
Series/C200 Series Chipset Family USB Enhanced Host Controller #2
0/1b/0 8086 1c20 audiohd0 Intel Corporation 6
Series/C200 Series Chipset Family High Definition Audio Controller
0/1c/0 8086 1c10 -- Intel Corporation 6
Series/C200 Series Chipset Family PCI Express Root Port 1
0/1c/2 8086 1c14 pcieb1 Intel Corporation 6
Series/C200 Series Chipset Family PCI Express Root Port 3
0/1c/4 8086 1c18 pcieb2 Intel Corporation 6
Series/C200 Series Chipset Family PCI Express Root Port 5
3/0/0 10ec 8168 rge0 Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
0/1d/0 8086 1c26 ehci1 Intel Corporation 6
Series/C200 Series Chipset Family USB Enhanced Host Controller #1
0/1f/0 8086 1c5c isa0 Intel Corporation H61
Express Chipset LPC Controller
0/1f/2 8086 1c00 pci-ide0 Intel Corporation 6
Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode,
ports
0-3)
0/1f/3 8086 1c22 -- Intel Corporation 6
Series/C200 Series Chipset Family SMBus Controller
0/1f/5 8086 1c08 pci-ide1 Intel Corporation 6
Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode,
ports
4-5)
e.g., I can see, on one of my systems:
0/1f/6 8086 15b7 e1000g0 Intel Corporation
Ethernet Connection (2) I219-LM
Cheers.
--
Joshua M. Clulow
http://blog.sysmgr.org
_______________________________________________
openindiana-discuss mailing list
[email protected]
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
[email protected]
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
[email protected]
https://openindiana.org/mailman/listinfo/openindiana-discuss
Hi!
The last few weeks i had some related symptom, that my connection to the
internet is not reachable after a period of time.
In my case, the default route gets lost somehow. When i add a new
default route according to my home network everything is fine again.
Some hints:
$ route get default
...
$ sudo route add 0.0.0.0 192.168.0.1
...
I have a Ethernet Connection (5) I219-LM 8086:15e3
Maybe this was since my pkg update on 2022-03-09.
And i don't know for sure if this symptom is solved or not with my pkg
update yesterday, we'll see..
Regards,
Stephan
_______________________________________________
openindiana-discuss mailing list
[email protected]
https://openindiana.org/mailman/listinfo/openindiana-discuss
