I have an OI 151a7 system that for some reason NEVER EVER could be updated.
I have tried, following lots of ideas from lots of people on this list, but to absolutely no avail.
So, I have come to a point where I absolutely need to run smartmontools to avoid problems, and smartctl fails.
I installed smartmontools version 6.5 from a tar ball, and it seems to run, but using it fails.
What could be wrong??? does this indicate a sw error or something broken in the SATA interfaces??
1. It seems to partially work: hans@klaus%167%13:28> pfexec ./smartctl -a -P show /dev/rdsk/c1t0d0s0 smartctl 6.4 2015-06-04 r4109 [i386-pc-solaris2.12] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org Drive found in smartmontools Database. Drive identity strings: MODEL: ST1000NM0033-9ZM173 FIRMWARE: SN06 match smartmontools Drive Database entry: MODEL REGEXP: ST[1234]000NM00[35]3-.*|MB1000GCWCV FIRMWARE REGEXP: .* MODEL FAMILY: Seagate Constellation ES.3 ATTRIBUTE OPTIONS: None preset; no -v options are required. 2. trying to look at any smart test results won't work hans@klaus%168%13:33> pfexec ./smartctl -a /dev/rdsk/c1t0d0s0 smartctl 6.4 2015-06-04 r4109 [i386-pc-solaris2.12] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.3 Device Model: ST1000NM0033-9ZM173 Serial Number: Z1W5KJ6M LU WWN Device Id: 5 000c50 09180d2a1 Firmware Version: SN06 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jan 19 13:35:04 2017 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled Read SMART Data failed: scsi error aborted command === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error aborted command SMART overall-health self-assessment test result: UNKNOWN! SMART Status, Attributes and Thresholds cannot be read. Read SMART Log Directory failed: scsi error aborted command Read SMART Error Log failed: scsi error aborted command Read SMART Self-test Log failed: scsi error aborted command Selective Self-tests/Logging not supported 3. running a test won't work, either! hans@klaus%169%13:35> pfexec ./smartctl -t short /dev/rdsk/c1t0d0s0 smartctl 6.4 2015-06-04 r4109 [i386-pc-solaris2.12] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org Read SMART Data failed: scsi error aborted command _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
