Seems like problem comes when network trying to up. Have you tried compile newer version of network card driver? 25.06.2014 20:42 пользователь "Michael Hase" <[email protected]> написал:
> Update: now I managed to get an mdb prompt after sending multiple breaks > just before the smf [ network... ] messages: > > ... > pseudo-device: audio0 > hid10 is /pci@0,0/pci1734,11cb@1d/hub@1/keyboard@2 > audio0 is /pseudo/audio@0 > /pci@0,0/pci1734,11cb@1d/hub@1/keyboard@2 (hid10) online > pseudo-device: stmf_sbd0 > stmf_sbd0 is /pseudo/stmf_sbd@0 > ~ > Welcome to kmdb > kmdb: unable to determine terminal type: assuming `vt100' > Loaded modules: [ scsi_vhci stmf_sbd mac uppc neti sd unix mpt zfs krtld > s1394 > apix nca uhci hook genunix ip usba specfs pcplusmp cpu.generic arp stmf > sockfs > ] > [1]> moddebug/W 80000000 > moddebug: 0 = 0x80000000 > [1]> :c > [ network/ip-interface-management:default starting (IP interface > management) ] > [ network/netcfg:default starting (Network configuration data management) ] > [ network/datalink-management:default starting (data-link management > daemon) ] > load 'drv/log' id 163 loaded @ 0xfffffffff80236d8/0xffffffffc0128b68 size > 2320/568 > installing log, module id 163. > load 'drv/sysevent' id 164 loaded @ 0xfffffffff80b0000/0xffffffffc0128da0 > size 5360/368 > installing sysevent, module id 164. > load 'drv/softmac' id 165 loaded @ 0xfffffffff80b2000/0xffffffffc012a110 > size 37416/2912 > installing softmac, module id 165. > [ network/loopback:default starting (loopback network interface) ] > load 'socketmod/rts' id 166 loaded @ 0xfffffffff7d8ac38/0xffffffffc012ac70 > size 952/688 > installing rts, module id 166. > uninstalled rts > unloading rts, module id 166, loadcnt 1. > load 'socketmod/rts' id 166 loaded @ 0xfffffffff7d8ac38/0xffffffffc012ac70 > size 952/688 > installing rts, module id 166. > uninstalled rts > unloading rts, module id 166, loadcnt 2. > [ network/physical:default starting (physical network interfaces) ] > load 'drv/e1000g' id 167 loaded @ 0xfffffffff80bc000/0xffffffffc012b000 > size 234136/1024 > installing e1000g, module id 167. > load 'mac/mac_ether' id 168 loaded @ 0xfffffffff7ccf3c8/0xffffffffc012c000 > size 3120/3680 > installing mac_ether, module id 168. > load 'dacf/net_dacf' id 169 loaded @ 0xfffffffff7d0dd40/0xffffffffc0128f10 > size 696/192 > installing net_dacf, module id 169. > load 'drv/vnic' id 170 loaded @ 0xfffffffff80f6000/0xffffffffc012ac70 > size 8048/616 > installing vnic, module id 170. > load 'misc/gld' id 172 loaded @ 0 > > So it seems to hang when trying to load the misc/gld driver. After this no > chance to send another break or get back to the kmdb console. > Any ideas what to do next? > > Michael > > On 06/25/14 12:19, Michael Hase wrote: > >> Hi, >> >> my oi_151a7 box (fujitsu siemens tx100 s3p) repeatedly hung at boot time >> on power loss or using the power button. Bootings starts and the last >> message with boot options -m verbose -kv is >> >> [ network/physical:default starting (physical network interfaces) ] >> >> Last kernel message is >> >> stmf_sbd0 is /pseudo/stmf_sbd@0 >> >> When booting from usb I can import the root pool without any problems, >> hardware seems ok, disks look ok, networking (intel e1000) is ok. root pool >> consists of two mirrored 2.5" sas disks connected to an lsi sas controller. >> After exporting the pool and reboot it sometimes boots and sometimes hangs, >> today it seems to hang permanently. In case of a hang the usb keyboard >> doesn't work anymore, the keyboard lights on caps lock/num lock are dead. >> F1-A doesn't work (I think this doesn't work with an usb keyboard anyway). >> When shutting down normally, the box booted without problems til now. >> >> Now I attached a serial console, great to have an old sun ultra 60 >> around, which boots without any problem after two years. Please find the >> output of the boot process below. I thought I can access the kernel >> debugger via serial console, but a break doesn't do anything. >> >> Does anybody have an idea how to access the kernel debugger in this case? >> >> Do I have to disable/disconnect the keyboard when using the serial >> console? I just added console=ttya on the grub command line, nothing else >> changed. >> >> Did someone see similiar behaviour of boot hangs after power loss? >> >> Thanks, >> Michael >> >> >> serial console output: >> ----------------------------- >> module /platform/i86pc/kernel/amd64/unix: text at [0xfffffffffb800000, >> 0xfffffffffb96500b] data at 0xfffffffffbc00000 >> module /kernel/amd64/genunix: text at [0xfffffffffb965010, >> 0xfffffffffbbed857] data at 0xfffffffffbc954c0 >> Loading kmdb... >> module /kernel/misc/amd64/kmdbmod: text at [0xfffffffffbd05090, >> 0xfffffffffbdba4d7] data at 0xfffffffffbdba4e0 >> module /kernel/misc/amd64/ctf: text at [0xfffffffffbbed860, >> 0xfffffffffbbf81b7] data at 0xfffffffffbdd6490 >> OpenIndiana Build oi_151a7 64-bit (illumos 13815:61cf2631639d) >> SunOS Release 5.11 - Copyright 1983-2010 Oracle and/or its affiliates. >> All rights reserved. Use is subject to license terms. >> x86_feature: lgpg >> x86_feature: tsc >> x86_feature: msr >> x86_feature: mtrr >> x86_feature: pge >> x86_feature: de >> x86_feature: cmov >> x86_feature: mmx >> x86_feature: mca >> x86_feature: pae >> x86_feature: cv8 >> x86_feature: pat >> x86_feature: sep >> x86_feature: sse >> x86_feature: sse2 >> x86_feature: htt >> x86_feature: asysc >> x86_feature: nx >> x86_feature: sse3 >> x86_feature: cx16 >> x86_feature: cmp >> x86_feature: tscp >> x86_feature: mwait >> x86_feature: cpuid >> x86_feature: ssse3 >> x86_feature: sse4_1 >> x86_feature: sse4_2 >> x86_feature: clfsh >> x86_feature: 64 >> x86_feature: aes >> x86_feature: pclmulqdq >> x86_feature: xsave >> x86_feature: avx >> x86_feature: vmx >> mem = 25132860K (0x5fdfcf000) >> SMBIOS v2.7 loaded (2898 bytes)initialized model-specific module >> 'cpu_ms.GenuineIntel' on chip 0 core 0 strand 0 >> root nexus = i86pc >> pseudo0 at root >> pseudo0 is /pseudo >> scsi_vhci0 at root >> scsi_vhci0 is /scsi_vhci >> Reading Intel IOMMU boot options >> npe0 at root: space 0 offset 0 >> npe0 is /pci@0,0 >> PCI Express-device: isa@1f, isa1 >> pseudo-device: acpippm0 >> acpippm0 is /pseudo/acpippm@0 >> pseudo-device: ppm0 >> ppm0 is /pseudo/ppm@0 >> PCI Express-device: pci8086,1c10@1c, pcieb10 >> pcieb10 is /pci@0,0/pci8086,1c10@1c >> /pci@0,0/pci8086,1c10@1c/pci1000,3091@0 (mpt3): >> Rev. 8 LSI, Inc. 1064E found. >> /pci@0,0/pci8086,1c10@1c/pci1000,3091@0 (mpt3): >> mpt3 supports power management. >> /pci@0,0/pci8086,1c10@1c/pci1000,3091@0 (mpt3): >> mpt3 Firmware version v1.23.4.0 (IR) >> /pci@0,0/pci8086,1c10@1c/pci1000,3091@0 (mpt3): >> mpt3: IOC Operational. >> /pci@0,0/pci8086,1c10@1c/pci1000,3091@0 (mpt3): >> NVDATA default version 0x2b00, persistent version >> 0x2b00PCIE-device: pci1000,3091@0, mpt3 >> PCI Express-device: pci1000,3091@0, mpt3 >> mpt3 is /pci@0,0/pci8086,1c10@1c/pci1000,3091@0 >> WARNING: No randomness provider enabled for /dev/random. Use >> cryptoadm(1M) to enable a provider. >> sd28 at mpt3: unit-address b,0: target b lun 0 >> sd28 is /pci@0,0/pci8086,1c10@1c/pci1000,3091@0/sd@b,0 >> /pci@0,0/pci8086,1c10@1c/pci1000,3091@0/sd@b,0 (sd28) online >> sd31 at mpt3: unit-address d,0: target d lun 0 >> sd31 is /pci@0,0/pci8086,1c10@1c/pci1000,3091@0/sd@d,0 >> /pci@0,0/pci8086,1c10@1c/pci1000,3091@0/sd@d,0 (sd31) online >> root on rpool2/ROOT/openindiana151a7 fstype zfs >> acpinex0 at root >> acpinex0 is /fw >> acpinex: cpu@1, cpudrv4 >> /fw/cpu@1 (cpudrv4) online >> pseudo-device: dld0 >> dld0 is /pseudo/dld@0 >> ISA-device: asy1 >> asy1 is /pci@0,0/isa@1f/asy@1,3f8 >> PCI Express-device: pci8086,1c1c@1c,6, pcieb11 >> pcieb11 is /pci@0,0/pci8086,1c1c@1c,6 >> PCI Express-device: pci8086,244e@1e, pci_pci0 >> pci_pci0 is /pci@0,0/pci8086,244e@1e >> PCI Express-device: pci1734,11cb@1a, ehci2 >> ehci2 is /pci@0,0/pci1734,11cb@1a >> PCI Express-device: pci1734,11cb@1d, ehci3 >> ehci3 is /pci@0,0/pci1734,11cb@1d >> cpu0: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock >> 3093 MHz) >> cpu0: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz >> initialized cpu module 'cpu.generic' on chip 0 core 1 strand 0 >> initialized model-specific module 'cpu_ms.GenuineIntel' on chip 0 core 1 >> strand 0 >> initialized cpu module 'cpu.generic' on chip 0 core 2 strand 0 >> acpinex: cpu@2, cpudrv5 >> initialized model-specific module 'cpu_ms.GenuineIntel' on chip 0 core 2 >> strand 0 >> /fw/cpu@2 (cpudrv5) online >> cpu1: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock >> 3093 MHz) >> cpu1: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz >> cpu1 initialization complete - online >> initialized cpu module 'cpu.generic' on chip 0 core 3 strand 0 >> acpinex: cpu@3, cpudrv6 >> initialized model-specific module 'cpu_ms.GenuineIntel' on chip 0 core 3 >> strand 0 >> /fw/cpu@3 (cpudrv6) online >> cpu2: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock >> 3093 MHz) >> acpinex: cpu@4, cpudrv7 >> cpu2: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz >> /fw/cpu@4 (cpudrv7) online >> cpu2 initialization complete - online >> cpu3: x86 (chipid 0x0 GenuineIntel 306A9 family 6 model 58 step 9 clock >> 3093 MHz) >> USB 2.0 device (usb8087,24) operating at hi speed (USB 2.x) on USB 2.0 >> root hub: hub@1, hubd0 at bus address 2 >> cpu3: Intel(r) Xeon(r) CPU E3-1220 V2 @ 3.10GHz >> USB 2.0 device (usb8087,24) operating at hi speed (USB 2.x) on USB 2.0 >> root hub: hub@1, hubd1 at bus address 2 >> cpu3 initialization complete - online >> hubd0 is /pci@0,0/pci1734,11cb@1a/hub@1 >> hubd1 is /pci@0,0/pci1734,11cb@1d/hub@1 >> /pci@0,0/pci1734,11cb@1a/hub@1 (hubd0) online >> /pci@0,0/pci1734,11cb@1d/hub@1 (hubd1) online >> pseudo-device: tzmon0 >> tzmon0 is /pseudo/tzmon@0 >> USB 2.0 device (usb46a,1) operating at low speed (USB 1.x) on USB 2.0 >> external hub: keyboard@2, hid10 at bus address 3 >> Cherry GmbH >> hid10 is /pci@0,0/pci1734,11cb@1d/hub@1/keyboard@2 >> /pci@0,0/pci1734,11cb@1d/hub@1/keyboard@2 (hid10) online >> pseudo-device: audio0 >> audio0 is /pseudo/audio@0 >> pseudo-device: stmf_sbd0 >> stmf_sbd0 is /pseudo/stmf_sbd@0 >> [ network/netcfg:default starting (Network configuration data management) >> ] >> [ network/datalink-management:default starting (data-link management >> daemon) ] >> [ network/ip-interface-management:default starting (IP interface >> management) ] >> [ network/loopback:default starting (loopback network interface) ] >> [ network/physical:default starting (physical network interfaces) ] >> >> >> _______________________________________________ >> openindiana-discuss mailing list >> [email protected] >> http://openindiana.org/mailman/listinfo/openindiana-discuss >> > > > _______________________________________________ > openindiana-discuss mailing list > [email protected] > http://openindiana.org/mailman/listinfo/openindiana-discuss > _______________________________________________ openindiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
