Hello Reginald Beardsley and List, On März, 26 2014, 14:43 <Reginald Beardsley> wrote in [1]:
> # echo "::walk sd_state | ::grep '.!=0' | ::print struct sd_lun > un_sd |::print struct scsi_device sd_inq | ::print struct > scsi_inquiry inq_vid inq_pid" | mdb -k > inq_vid = [ "Toshiba " ] > inq_pid = [ "External USB 3.0" ] > # echo ::sd_state | mdb -k | egrep '(^un|_blocksize)' > un 3: ffffff0148254cc0 > un_sys_blocksize = 0x200 > un_tgt_blocksize = 0x1000 > un_phy_blocksize = 0x200 > un_f_tgt_blocksize_is_valid = 0x1 > Add entry in sd.conf: > sd-config-list = "*Toshiba*" ,"physical-block-size:4096"; I think you do here a little mistage. * is not allowed. Thats the right way: sd-config-list = "Toshiba External USB 3.0" ,"physical-block-size:4096"; I am not sure here, please type at CLI format, select the drive, than inquiry sd-config-list = "Vendor Product", "physical-block-size:4096"; On März, 26 2014, 21:19 <Reginald Beardsley> wrote in [2]: > Just a couple of warnings "block alignment is larger than the pool's > alignment". You get this warning, when your pool is set ashift=9 and in the sd.conf file is this HDD named to ashift=12 (4098b) or ashift=13 (8196b) -- Best Regards Alexander März, 27 2014 ........ [1] mid:[email protected] [2] mid:[email protected] ........ _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
