Hi Poitr, Here is a very basic example for home usage. It will create a disk visible to all clients.
1. create a place to put your disks >zfs create rpool/ISCSI 2. create a zfs slice for your ISCSI disk (you can also make it thin provisioned using -s) >zfs create -V 64G rpool/ISCSI/Store0 3. Install the packages >pkg install storage-server >svcadm -r enable iscsi/target 3. Attach the LUN >stmfadm create-lu /dev/zvol/rdsk/rpool/ISCSI/Store0 4. to view your creation >sbdadm list-lu >sudo stmfadm list-lu -v 5. Give your LUN a nice name (optional) using <LU NAME> from list-lu command >stmfadm modify-lu -p alias=windows <LU NAME> 6. Create the target >itadm create-target 7. Show your creation >itadm list-target 7. Make your LUN visible from the target >stmfadm add-view <LU NAME> You should now be able to connect to the target/LUN from any client computer using the IQN name from itadm list-target Additionally you should make it so the target is only visible from one interface using target portal groups otherwise it will look like a confusing mess on your client, especially if you are running IPv6 or have multiple virtual/physical interfaces. 1. Create the target portal group >itadm create-tpg tpg-ipv4 127.0.0.1 2. Modify the target where <TARGET NAME> is 'itadm list-target' >itadm modify-target -t tpg-ipv4 <TARGET NAME> 3. Show your Modifications >itadm list-target -v Hope this helps, Jarrad. On Tue, Aug 6, 2013 at 10:56 PM, Piotr May <[email protected]> wrote: > I seek guide (simple please ..) "How the Configure iSCSI" > Help! :) > Piotr > _______________________________________________ > OpenIndiana-discuss mailing list > [email protected] > http://openindiana.org/mailman/listinfo/openindiana-discuss > _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
