Hi All,
I have a IBM ServeRAID M1015 RAID controller which I tried to cross-flash to
LSA 9211-8i IT mode as mentioned in this website:
http://www.servethehome.com/ibm-serveraid-m1015-part-4/.
I have a IBM x3650 M3 server which I then use with the ServeRAID M1015 raid
card to test if my card is working in the IT mode as mentioned. I have tried
booting using OpenIndiana 151a and 151a7 LiveCD/USB to try and detect the card.
The system is able to detect the raid card but when I tried to add the drivers
"mpt_sas" to the system, I got the following errors:
root@openindiana:~# add_drv -i
"pci1014,3b1" mpt_sas
devfsadm: driver failed to attach:
mpt_sas
Warning: Driver (mpt_sas) successfully
added to system but failed to attach
Feb 21 17:14:22 openindiana scsi: [ID
107833 kern.warning] WARNING:
/pci@0,0/pci8086,3410@9/pci1014,3b1@0
(mpt_sas0):
Feb 21 17:14:22 openindiana hard reset
failed!
Feb 21 17:14:22 openindiana scsi: [ID
107833 kern.warning] WARNING:
/pci@0,0/pci8086,3410@9/pci1014,3b1@0
(mpt_sas0):
Feb 21 17:14:22 openindiana mptsas
chip initialization failed
Feb 21 17:14:22 openindiana scsi: [ID
107833 kern.warning] WARNING:
/pci@0,0/pci8086,3410@9/pci1014,3b1@0
(mpt_sas0):
Feb 21 17:14:22 openindiana attach
failed
Boot to the RAID controller, I gathered the following information:
Firmware Version: 2.70.74-1038
FW Package Version: 20.5.1-0014
FW Time: Oct 13 2010, 13:52:10
WebBIOS Version: 4.0-e_24-Rel
SubVendor ID: 0x1014
SubDevice ID: 0x3b1
Doing a scanpci:
sudo scanpci | less #search for LSI
pci bus 0x0010 cardnum 0x00 function 0x00: vendor 0x1000 device
0x0073
LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon]
===========
So it does find the card. And then prtconf:
=====================
jack@openindiana:~$ prtconf -Dv | less #search for 73
pci1014,3b1 (driver name: mpt_sas)
Hardware properties:
name='pci-msix-capid-pointer' type=int items=1
value=000000c0
name='pci-msi-capid-pointer' type=int items=1
value=000000a8
name='assigned-addresses' type=int items=15
value=81100010.00000000.00001000.00000000.00000100.83100014.00000000.92940000.00000000.00004000.8310001c.000
00000.92900000.00000000.00040000
name='reg' type=int items=20
value=00100000.00000000.00000000.00000000.00000000.01100010.00000000.00000000.00000000.00000100.03100014.000
00000.00000000.00000000.00004000.0310001c.00000000.00000000.00000000.00040000
name='compatible' type=string items=13
value='pciex1000,73.1014.3b1.3' +
'pciex1000,73.1014.3b1' + 'pciex1000,73.3' + 'pciex1000,73' +
'pciexclass,010400' + 'pciexclass,0104' + 'pci1000,73.1014.3b1.3' +
'pci1000,73.1014.3b1' + 'pci1014,3b1' + 'pci1000,73.3' +
'pci1000,73' + 'pciclass,010400' + 'pciclass,0104'
name='model' type=string items=1
value='RAID controller'
name='power-consumption' type=int items=2
value=00000001.00000001
name='devsel-speed' type=int items=1
value=00000000
name='interrupts' type=int items=1
value=00000001
name='subsystem-vendor-id' type=int items=1
value=00001014
name='subsystem-id' type=int items=1
value=000003b1
name='unit-address' type=string items=1
value='0'
name='class-code' type=int items=1
value=00010400
name='revision-id' type=int items=1
value=00000003
name='vendor-id' type=int items=1
value=00001000
name='device-id' type=int items=1
value=00000073
===============
With the OI 151a7 liveUSB, I noticed that in the Device Driver Utility, the
system is saying the RAID card is misconfigured.
I have tried using an Ubuntu LiveCD and it can see the card and is able to
detect the harddisks that is attached to the card.
Does anyone have any similiar experience? Is there any other drivers or setting
that I need to configure?
Best Regards.
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
