Hi Roel, Check permissions and proper installment of the modules from the bge package. Once you get that fixed, check DDT again and it should be configured correctly.
Main files of concern: 1.'group=sys mode=0755 owner=root path=kernel/drv/amd64/bge' 2.'group=sys mode=0644 owner=root path=kernel/drv/bge.conf' Recheck for proper driver initialization and setup. The other hardware, outside of the RAID controller, are other small issues as mentioned. ~ Ken Mays ________________________________ From: Roel_D <[email protected]> To: 'Discussion list for OpenIndiana' <[email protected]> Sent: Wednesday, September 26, 2012 2:57 AM Subject: [OpenIndiana-discuss] Dell PowerEdge R320 with Perc H710 install problems I finally got some screenshots of the installprocess on the R320. It is not only the RAID controller that gives problems, there is more.. The Broadcom networkcards aren't recognized and I tried to install the new Solaris drivers from the Broadcom website. Main problem with this is that there are several drivers for different solaris versions. Only the BRCMbge-Solaris_11-i386-15.2.2-dbg package would install. I also attach the printout of the installprocess for the BRCMbge package. It will not install unless i de-install the existing bge driver. With the original OI bge driver the nic's aren't recognized. As you can see in the screenshot a lot of hardware is not recognized and I can't install OI in any form. So this is bumpy road to maybe nowhere. If anyone can help or has tips I appreciate it! _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
