The MCU is 3.3V, so it requires a level shifter to match the 5V coming from the USB-serial adapter to the MCU. The level shifter and Keyspan work just fine, though the USB driver may not be playing nice.
The real issue is the pathologically complex handling of serial lines in Solaris and the ambiguous documentation. I am not convinced that anyone, myself included, knows which direction is which. I know which direction is in and out for communication w/ the local host, but that is all I'm sure of. Coupled w/ the fact that no one seems to have done much w/ a serial port connection in many years makes it more difficult. I last used tip 14 years ago to connect to my ISDN router. It took only a couple of minutes to setup. The first forth MCU also took a couple of minutes to setup. The second beat me senseless for 6 hours. In light of the long history of misery and suffering by system admins at the hands of serial port connections, this should not be a big surprise. When I actually did a lot of RS-232 work I was running VMS 4.x on a MicroVAX connecting to a variety of terminals and an 11/780 w/ an FPS-120B attached. That was a long time ago when Sun was a young upstart I'd not even heard of. I *may* build up OI from source so I can run under the debugger and resolve the issue. But because I've modified the remote host to emit NL-CR, it's really not important to me other than it would be nice to have a reasonably behaved facility for connecting over a serial line to a remote host. If I really get in a jam, I can run Linux. I just prefer not to if I can avoid it. If I elect to work on the OI/Illumos serial port discipline, it will be for aesthetic rather than practical reasons. Have Fun! Reg _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
