Hi Sašo,
> Oh, my curiosity certainly isn't worth changing your schedule for. I > don't have anything running yet. I have a couple of older Netra 240 > machines (currently on S10) which I could use for some testing, but that > will take me some days to bootstrap, so no need to hurry with the bins > on your part. Whenever you are ready to make a workable release in your > normal schedule is fine with me. ok, that's fine. Because I still use my old 2010 nv125 workspace and back then I already adapted text-install. Two years it rested unchanged on my Blade 2000. And now I finish this. As it is running, it gets merged with Illumos, which I also built, just about 3 weeks ago. That is: I check which SPARC-relevant legacy code was removed from Illumos, that we might want again. I was told that not much got removed, so it should be a no-brainer. Hint to your Sol10 installation: In theory it is possible to run bins built on 5.11 on 5.10, but among other libs most importantly libc got at least one new symbol. In the past I experimented with mounting /lib and /usr from another 5.11 machine over a running 5.10's /lib and /usr Or for example to /lib0 and /usr0 (and then with LD_LIBRARY_PATH or LD_PRELOAD). and the results were interesting. But I don't recommend that. However, as I no longer have a single 5.10 installation, I cannot build Xsun on/for 5.10. So either you install SXCE_125 to one of your boxes and then I give you 5.11 test bins, or I rather would like to encourage you, until I have the entire OS finished. The problem during the last 2 years was, that I did lots of _other_ things. As I see you fellows waiting, I push priorities. After all, I enjoy this stuff a lot, too. Thanks, %martin _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
