On 05/22/12 13:12, Matthieu Paindavoine wrote:
> I did not follow your solution though, as I just choose to simply reinstall
> OpenIndiana, it's so fast, and I didn't have anything on the machine yet.
> I can see my drives with cfgadm -a sata.
> I can not yet see a newly inserted plugged HD, but this might be a hardware
> issue, I'll have to run some test with other drives, other bays...
I've seen irregular behavior with sata hot plug recently on oi_151a3
what I've observed so far is that a hot plug and configure into a port that's
initially empty at boot seems to work ok, as does a unconfigure and unplug.
Once you've unplugged once, a second hot plug operation into the same port
appears to succeed, but I/O to that disk hangs; the disk is stable after a
reboot.
I haven't had a chance to dig into this further. My experience was with a
SuperMicro X8SAX motherboard.
- Bill
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
