I have this problem on a system that I was using to back up 50 gbs of material each night. It would transfer that across the network in zfs and that would kill it but it would only happen after a week or so of nightly updates of roughly the same size. This machine has 32gb of ram and a cp process would hang and swallow it all bringing the system to its knees. I just stopped that big transfer job and called it a night. I am no longer backing up my files to 3 different buildings but that is better than crashing my sunray server every 5 days.

On 2/22/2012 1:48 AM, Milan Jurik wrote:
Hi,

one of my systems was suffering from very similar symptoms. I had no chance to debug it much as it was on remote site in serverhouse. But in my case it was lack of memory, system was under significant memory pressure. I was unable to reproduce it on small systems I have at home. I added some memory and set limits for zones.

One small suggestion - could you write small script dumping memory info (from kernel mdb) and list of processes to the disk and run it from crontab every few minutes? Maybe it will be unable to store data during "hang" but at least you could see trend.

For lost IP address - are you using NWAM?

Best regards,

Milan

On 22.02.2012 07:32, [email protected] wrote:
Hi there,

I'm seeing roughly weekly hangs on a server running OpenIndiana 151a. I'm
using it primarily as a home fileserver with ZFS.

The exact behavior seems to depend on when I notice it, but essentially the server drops off the network and is only variably responsive when I try to access the console directly. Sometimes when this happens the system doesn't respond at all (e.g., not even to keyboard input). One time I was able to
interact with the console (after the server had disappeared from the
network) and tried to see what was going on. Tried pinging
google.com(unreachable, as expected). Next I tried `ifconfig -a` and
got this:

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu
1500 index 2
        inet 0.0.0.0 netmask ff000000


which explains the lack of connectivity. But after it printed that it
didn't return. The console still printed my keyboard output (including ^C,
^Z, etc.), and there was still output coming from other sources (e.g., I
have napp-it running regular snapshots, so I saw a notice that it had used
sudo to run that) but I couldn't get a prompt back. Next I tried hitting
the power button on the machine I got this:

poweroff: initiated by user on /dev/console
in.ndpd[994]: phyint_reach_random: SIOCSLIFLNKINFO (interfac e1000g0):
Interrupted system call
bootadm: /boot/solaris/bin/extract_boot_filelist is not owned by 101,
skipping
syncing file systems... done
WARNING: Power off requested from power button or SC, powering down the
system!


followed shortly by:

WARNING: Failed to shut down the system!


Tried looking through the logs for anything interesting but didn't come up with anything, though to be honest I'm not 100% sure where to look or what to look for. When the machine drops off the network I can still access it via IPMI (tried this using both the dedicated jack on the motherboard and
by sharing the Intel NIC--worked in both cases, but OI was still
unresponsive), so I doubt it's a bad NIC. Motherboard is a Supermicro
X9SCM-F.

I know that at least sometimes the system will stop running even my ZFS
snapshots via napp-it, since I've come back to a frozen console that showed
the last snapshot being taken 12+ hours before (they're supposed to be
taken every 15 minutes). My guess is this is just because it takes me
longer to notice sometimes--seems like it's hitting a deadlock somewhere
that eventually grinds everything to a halt (like with the ipconfig call
above).

Also, FWIW, here's what ipconfig -a gets me when it works correctly (MAC
address removed, although interestingly it wasn't even printed in the
output above):

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500
index 2
        inet 192.168.10.10 netmask ffffff00
        ether [MAC address here]
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
        inet6 ::1/128
e1000g0: flags=20002004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
        inet6 fe80::225:90ff:fe50:2c2a/10
        ether [MAC address here]


Any ideas/suggestions on where to go from here? Thanks in advance.


_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss

--
Dr. Daniel Kjar
Assistant Professor of Biology
Division of Mathematics and Natural Sciences
Elmira College
1 Park Place
Elmira, NY 14901
607-735-1826
http://faculty.elmira.edu/dkjar

"...humans send their young men to war; ants send their old ladies"
        -E. O. Wilson


_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss

Reply via email to