fresh openinidna 148 install. It came up with ipv6 for nge1/nge2 after
auto-discovering and I did the unplumb on those, so the interfaces are
clean and unused, but still I can't create the aggregate.
hughesd@x4240-3-1-17:~# dladm show-aggr
hughesd@x4240-3-1-17:~# dladm create-aggr -d nge2 1
dladm: create operation failed: link busy
hughesd@x4240-3-1-17:~# dladm create-aggr -d nge1 1
dladm: create operation failed: link busy
hughesd@x4240-3-1-17:~# dladm show-aggr
hughesd@x4240-3-1-17:~# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index
inet 127.0.0.1 netmask ff000000
nge0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500
index 8
inet 10.232.4.60 netmask fffffc00 broadcast 10.232.7.255
ether 0:14:4f:ed:b8:ec
hughesd@x4240-3-1-17:~# uname -a
SunOS x4240-3-1-17 5.11 oi_148 i86pc i386 i86pc
hughesd@x4240-3-1-17:~# dladm create-aggr -d nge1 -d nge2 1
dladm: create operation failed: link busy
hughesd@x4240-3-1-17:~#
_______________________________________________
OpenIndiana-discuss mailing list
[email protected]
http://openindiana.org/mailman/listinfo/openindiana-discuss
