> >I just finished replacing 7x3+1(spare) 2TB drives with Hitachi 3TB > >ones, and it works like a dream. Also, Hitachi 3TB drives have 512 > >byte sector size, >only a larger LBA (don't remember how many bits). > > What release are you using, I assume as you are on this mailing list > it could be OpenIndiana. Did you do anything special with the disks or > did you just add them and it worked? > > I am currently using opensolaris snv_134
I'm on OI 148. I didn't do anything but the standard # zpool offline dpool c7t2d0 # cfgadm -a | grep c7t2d0 sata1/2::dsk/c7t2d0 # cfgadm -c unconfigure sata1/2 (replace drive) # cfgadm -c configure sata1/2 # zpool replace dpool c7t2d0 c7t2d0 This is a system with three AOC-SAT2-MV8 controllers - I replaced one disk per raidz2 vdev and let that resilver (that is, resilvering one drive in each of the three VDEVs at a time). Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 [email protected] http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
