Hi John, I'm not familiar wit this array. Did you enable MPxIO?
It would be useful to have the output from the following commands -> stmsboot -L cfgadm -al mpathadm list lu Thanks, Matt ________________________________ From: John T. Bittner <[email protected]> To: "[email protected]" <[email protected]> Sent: Tuesday, 8 February, 2011 15:03:36 Subject: [OpenIndiana-discuss] Multipath IO Dual LSI 9211-8i Have a system setup with dual LSI 9211-8i controller cards connected to a supermicro dual expander chassis SC846E26-R1200B This is a newer unit with a 6gb expander. With opensolaris build dev 134 the unit would boot and then just freeze. Take out of one controller and it comes up fine. Upgraded to openindiana oi_148 and now unit boots all the way and seems to be ok but the performance of the array has dropped from 500mps to 100mps. I am testing 13) 600gig 15k drives with 2 SSD's (log and cache). When I do a test I do see both controllers accessing the drives. Shouldn't one controller be the primary and the secondary just waiting? Also after this test, I rebooted the box and now it will not boot, it looks like it corrupted the boot drive. Any help on this is much appreciated. Thanks John Bittner _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list [email protected] http://openindiana.org/mailman/listinfo/openindiana-discuss
