On 4/12/12 10:36 AM, Steve Sakoman wrote:
On Thu, Apr 12, 2012 at 6:39 AM, Steve Sakoman<[email protected]> wrote:
That is very odd, the system is supposed to identify all of the dependencies needed for the first set of packages... (the three base-passwd, base-files and shadow).
The end result is a list of 10-12 binaries to be installed that meet those requirements, as well as the original three requested packages.
We also shouldn't specify bash because busybox provides /bin/sh in a lot of configurations.
Which image did you try to build and I'll see what I can replicate here. --Mark
FWIW, after pulling current poky this morning all of my image builds are failing with errors like this: | Installing base dependencies first (base-passwd, base-files and shadow) since rpm is special | error: Failed dependencies: | /bin/sh is needed by base-passwd-3.5.24-r0.armv7a | /bin/sh is needed by shadow-4.1.4.3-r8.armv7a | /bin/sh is needed by libgcc1-4.6.3+svnr184847-r24.armv7a | /bin/sh is needed by libc6-2.13-r23+svnr15508.armv7a I'll investigate, but since it is late in the release process thought I would mention the issue.I have no idea if this is the proper fix, but adding bash to the list of packages to install first fixed the issue for me: diff --git a/meta/classes/package_rpm.bbclass b/meta/classes/package_rpm.bbclass index fd00fb1..a5f0b06 100644 --- a/meta/classes/package_rpm.bbclass +++ b/meta/classes/package_rpm.bbclass @@ -475,7 +475,8 @@ EOF echo "Skipping pre install due to exisitng image" else echo "# Initial Install manifest"> ${target_rootfs}/install/initial_install.manifest - echo "Installing base dependencies first (base-passwd, base-files and shadow) since rpm is special" + echo "Installing base dependencies first (bash, base-passwd, base-files and shadow) since rpm is special" + grep /bash-[0-9] ${target_rootfs}/install/total_solution.manifest>> ${target_rootfs}/install/initial_install.manife grep /base-passwd-[0-9] ${target_rootfs}/install/total_solution.manifest>> ${target_rootfs}/install/initial_install grep /base-files-[0-9] ${target_rootfs}/install/total_solution.manifest>> ${target_rootfs}/install/initial_install. grep /shadow-[0-9] ${target_rootfs}/install/total_solution.manifest>> ${target_rootfs}/install/initial_install.mani I'm concerned we are on a slippery slope here! Stevediff --git a/meta/classes/package_rpm.bbclass b/meta/classes/package_rpm.bbclass index 16a2c87..1b0f6f2 100644 --- a/meta/classes/package_rpm.bbclass +++ b/meta/classes/package_rpm.bbclass @@ -166,22 +167,23 @@ rpm_common_comand () { # install or remove the pkg rpm_update_pkg () { + manifest=$1 + btmanifest=$manifest.bt local target_rootfs="${INSTALL_ROOTFS_RPM}" # Save the rpm's build time for incremental image generation, and the file # would be moved to ${T} - rm -f ${target_rootfs}/install/total_solution_bt.manifest - for i in `cat ${target_rootfs}/install/total_solution.manifest`; do + rm -f $btmanifest + for i in `cat $manifest`; do # Use "rpm" rather than "${RPM}" here, since we don't need the # '--dbpath' option - echo "$i `rpm -qp --qf '%{BUILDTIME}\n' $i`">> \ - ${target_rootfs}/install/total_solution_bt.manifest + echo "$i `rpm -qp --qf '%{BUILDTIME}\n' $i`">> $btmanifest done # Only install the different pkgs if incremental image generation is set if [ "${INC_RPM_IMAGE_GEN}" = "1" -a -f ${T}/total_solution_bt.manifest -a \ "${IMAGE_PKGTYPE}" = "rpm" ]; then - cur_list="${target_rootfs}/install/total_solution_bt.manifest" + cur_list="$btmanifest" pre_list="${T}/total_solution_bt.manifest" sort -u $cur_list -o $cur_list sort -u $pre_list -o $pre_list @@ -203,8 +205,7 @@ rpm_update_pkg () { -Uvh ${target_rootfs}/install/incremental.manifest else # Attempt to install - rpm_common_comand --replacepkgs \ - -Uhv ${target_rootfs}/install/total_solution.manifest + rpm_common_comand --replacepkgs -Uhv $manifest fi } @@ -440,14 +441,7 @@ package_install_internal_rpm () { fi - # If base-passwd or shadow are in the list of packages to install, - # ensure they are installed first to support later packages that - # may create custom users/groups (fixes Yocto bug #2127) - infile=${target_rootfs}/install/install_solution.manifest - outfile=${target_rootfs}/install/total_solution.manifest - cat $infile | grep /base-passwd-[0-9]> $outfile || true - cat $infile | grep /shadow-[0-9]>> $outfile || true - cat $infile | grep -v /shadow-[0-9] | grep -v /base-passwd-[0-9]>> $outfile || true + cat ${target_rootfs}/install/install_solution.manifest> ${target_rootfs}/install/total_solution.manifest cat ${target_rootfs}/install/install_multilib_solution.manifest>> ${target_rootfs}/install/total_solution.manifest # Construct install scriptlet wrapper @@ -474,8 +468,45 @@ EOF chmod 0755 ${WORKDIR}/scriptlet_wrapper - rpm_update_pkg + # RPM is special. It can't handle dependencies and preinstall scripts correctly. Its + # probably a feature. The only way to convince rpm to actually run the preinstall scripts + # for base-passwd and shadow first before installing packages that depend on these packages + # is to do two image installs, installing one set of packages, then the other. + if [ "${INC_RPM_IMAGE_GEN}" = "1" -a -f ${T}/total_solution_bt.manifest ]; then + echo "Skipping pre install due to exisitng image" + else + echo "# Intial Install manifest"> ${target_rootfs}/install/initial_install.manifest + echo "Installing base dependencies first (base-passwd, base-files and shadow) since rpm is special" + grep /base-passwd-[0-9] ${target_rootfs}/install/total_solution.manifest>> ${target_rootfs}/install/initial_install.manifest || true + grep /base-files-[0-9] ${target_rootfs}/install/total_solution.manifest>> ${target_rootfs}/install/initial_install.manifest || true + grep /shadow-[0-9] ${target_rootfs}/install/total_solution.manifest>> ${target_rootfs}/install/initial_install.manifest || true + + # Generate an install solution by doing a --justdb install, then recreate it with + # an actual package install! + mkdir -p ${target_rootfs}/initial + + ${RPM} --predefine "_rpmds_sysinfo_path ${target_rootfs}/etc/rpm/sysinfo" \ + --predefine "_rpmrc_platform_path ${target_rootfs}/etc/rpm/platform" \ + -D "_dbpath ${target_rootfs}/initial" -D "`cat ${confbase}-base_archs.macro`" \ + -D "__dbi_txn create nofsync" \ + -U --justdb --noscripts --notriggers --noparentdirs --nolinktos --ignoresize \ + ${target_rootfs}/install/initial_install.manifest + + ${RPM} -D "_dbpath ${target_rootfs}/initial" -qa --yaml \ + -D "__dbi_txn create nofsync private" \ + | grep -i 'Packageorigin' | cut -d : -f 2> ${target_rootfs}/install/initial_solution.manifest + + rpm_update_pkg ${target_rootfs}/install/initial_solution.manifest + + grep -Fv -f ${target_rootfs}/install/initial_solution.manifest ${target_rootfs}/install/total_solution.manifest> ${target_rootfs}/install/total_solution.manifest.new + mv ${target_rootfs}/install/total_solution.manifest.new ${target_rootfs}/install/total_solution.manifest + + rm -rf ${target_rootfs}/initial + fi + + echo "Installing main solution manifest (${target_rootfs}/install/total_solution.manifest)" + rpm_update_pkg ${target_rootfs}/install/total_solution.manifest } python write_specfile () {_______________________________________________ Openembedded-core mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
_______________________________________________ Openembedded-core mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
