After setting up OE-Core like described in the Angstrom instructions ( http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/metaA--angstrom/tree/README<http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-angstrom/tree/README> ), and running Bitbake console-image the following error occurs:
ERROR: Error executing a python function in > /home/*user*/oe-core/setup-scripts/sources/meta-openembedded/meta-oe/recipes-devtools/gcc/ > gcc-cross-initial_4.5.bb: > IOError: [Errno 36] File name too long: > '/home/*user*/oe-core/setup-scripts/build/sstate-cache/sstate-gcc-cross-initial-armv5te-angstrom-linux-gnueabi-4.5-r39.0+svnr175127-x86_64_armv5te-2-1ce8da5cb101acb651e00e9a2c94ecde_populate-lic.tgz.siginfo' > ERROR: The stack trace of python calls that resulted in this > exception/failure was: > ERROR: File "sstate_task_postfunc", line 10, in <module> > ERROR: > ERROR: File "sstate_task_postfunc", line 7, in sstate_task_postfunc > ERROR: > ERROR: File "sstate.bbclass", line 56, in sstate_package > ERROR: > ERROR: File > "/home/*user*/oe-core/setup-scripts/sources/bitbake/lib/bb/siggen.py", line > 218, in dump_this_task > ERROR: bb.parse.siggen.dump_sigtask(fn, task, outfile, "customfile") > ERROR: > ERROR: File > "/home/*user*/oe-core/setup-scripts/sources/bitbake/lib/bb/siggen.py", line > 189, in dump_sigtask > ERROR: p = pickle.Pickler(file(sigfile, "wb"), -1) > ERROR: > ERROR: The code that was being executed was: > ERROR: 0006: bb.build.exec_func(intercept, d) > ERROR: 0007: sstate_package(shared_state, d) > ERROR: 0008: > ERROR: 0009: > ERROR: *** 0010:sstate_task_postfunc(d) > ERROR: 0011: > ERROR: (file: 'sstate_task_postfunc', lineno: 10, function: <module>) > ERROR: 0003: shared_state = sstate_state_fromvars(d) > ERROR: 0004: sstate_install(shared_state, d) > ERROR: 0005: for intercept in shared_state['interceptfuncs']: > ERROR: 0006: bb.build.exec_func(intercept, d) > ERROR: *** 0007: sstate_package(shared_state, d) > ERROR: 0008: > ERROR: 0009: > ERROR: 0010:sstate_task_postfunc(d) > ERROR: 0011: > ERROR: (file: 'sstate_task_postfunc', lineno: 7, function: > sstate_task_postfunc) > ERROR: Function 'sstate_task_postfunc' failed > ERROR: Logfile of failure stored in: > /home/*user*/oe-core/tmp-eglibc/work/armv5te-angstrom-linux-gnueabi/gcc-cross-initial-4.5-r39.0+svnr175127/temp/log.do_populate_lic.12160 To provide further informations: Currently building with MACHINE ?= "tx28" The Bitbake procedure was reapeated with another machine configuration (MACHINE ?= "beagleboard") and the same error showed up (respectively the ARM version changed accordingly). I also cleaned the temp and build directories, but with the same result, help would be appreciated. Regards --Samuel
_______________________________________________ Openembedded-core mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
