Hi Kevin, Thanks for your reply.
I was hoping there was just a configuration error, also because X does not seem to find a monitor at all. > Using this "out of tree" OpenChrome DRM requires the user > to compile and install a custom Linux kernel. Well, if this is the route to go ... So I set up the Igel for kernel building. I have not done anyhing like this before so followed the instructions given here: https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel It took 13 hours to build but eventually the test seemd to be successful. No error messages but 10 new .deb-files: linux-buildinfo-5.4.0-51-generic_5.4.0-51.56_amd64.deb linux-image-unsigned-5.4.0-51-generic_5.4.0-51.56_amd64.deb linux-cloud-tools-5.4.0-51_5.4.0-51.56_amd64.deb linux-modules-5.4.0-51-generic_5.4.0-51.56_amd64.deb linux-cloud-tools-5.4.0-51-generic_5.4.0-51.56_amd64.deb linux-modules-extra-5.4.0-51-generic_5.4.0-51.56_amd64.deb linux-headers-5.4.0-51_5.4.0-51.56_all.deb linux-tools-5.4.0-51_5.4.0-51.56_amd64.deb linux-headers-5.4.0-51-generic_5.4.0-51.56_amd64.deb linux-tools-5.4.0-51-generic_5.4.0-51.56_amd64.deb Could you please point me to some documentation about how to proceed from here? On https://cgit.freedesktop.org/openchrome/drm-openchrome/ I found various tree versions drm-next-5.x and master also this link git://anongit.freedesktop.org/openchrome/drm-openchrome Whether they are relevant for me and if so, how to use them - I do not know. Thank you. Regards Jochen Am 19.10.20 um 20:54 schrieb Kevin Brace: > Hi Jochen, > > I am not very familiar with this device (IGEL UD10). > It is possible that your previous OS installation used VIA Technologies > written DDX. > I know that one supports VX900 chipset's integrated DVI / HDMI transmitter. > As of now, OpenChrome DDX does not support VX900 chipset's DVI / HDMI > transmitter. > The only exception is to use in-development OpenChrome DRM with OpenChrome > DDX. > The previous developer who worked on OpenChrome DRM ported VIA Technologies > VX900 chipset's DVI / HDMI transmitter's code to OpenChrome DRM, but if the > current OpenChrome DDX uses OpenChrome DRM, acceleration will be turned off. > Using this "out of tree" OpenChrome DRM requires the user to compile and > install a custom Linux kernel. > It typically takes about 20 to 25 GB of free storage for doing this (I do > work on this regularly.). > > Regards, > > Kevin Brace > Brace Computer Laboratory blog > https://bracecomputerlab.com > > >> Date: Sat, 17 Oct 2020 17:50:29 +0200 >> From: [email protected] >> To: [email protected] >> Subject: [openchrome-users] Failed to open DRM device - DRM memory >> allocation failed -6 >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=utf-8 >> >> Dear OpenChromers >> >> I cannot get OpenChrome to work. >> >> System: IGEL UD10 TC236, integrated Panel 1920x1080, no EDID >> Operating System: Xubuntu 20.04 >> >> The system originally came with an bespoke IGEL-OS (Ubuntu 14.04 >> actually) and had a VIA graphics-driver installed. Screen resolution >> 1920x1080 (which is not listed in vbeinfo!). >> >> I now want to use the system under (x)ubuntu 20.04. With OpenChrome >> (0.6.0-3) installed (xserver-xorg-video-openchrome), X fails to start >> and I get a black tty7: >> >> [??? 25.575] (EE) CHROME(0): [drm] Failed to open DRM device for >> pci:0000:00:01.0: No such file or directory >> >> [??? 25.631] (II) CHROME(0): EDID for output VGA-1 >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected >> [??? 25.631] (WW) CHROME(0): No outputs definitely connected, trying >> again... >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected >> [??? 25.631] (WW) CHROME(0): Unable to find connected outputs - setting >> 1024x768 initial framebuffer >> >> [??? 25.654] DRM memory allocation failed -6 >> ? >> What can I do? Any help is greatly appreciated. >> >> Do you need more detailed information? Let me know. >> >> >> Thank you! >> >> Jochen >> >> >> >> >> below this line: system information and logfiles >> >> ##### >> $ hwinfo --cpu >> 01: None 00.0: 10103 CPU??????????????????????????????????????? >> ? [Created at cpu.465] >> ? Unique ID: rdCR.j8NaKXDZtZ6 >> ? Hardware Class: cpu >> ? Arch: X86-64 >> ? Vendor: "CentaurHauls" >> ? Model: 6.15.13 "VIA Eden X2 U4200 @ 1.0+ GHz" >> ? Features: >> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,rep_good,nopl,cpuid,pni,monitor,vmx,est,tm2,ssse3,cx16,xtpr,sse4_1,popcnt,rng,rng_en,ace,ace_en,ace2,phe,phe_en,pmm,pmm_en,lahf_lm,pti,tpr_shadow,vnmi,ida >> ? Clock: 1000 MHz >> ? BogoMips: 2000.20 >> ? Cache: 1024 kb >> ? Units/Processor: 4 >> ? Config Status: cfg=new, avail=yes, need=no, active=unknown >> >> 02: None 01.0: 10103 CPU >> ? [Created at cpu.465] >> ? Unique ID: wkFv.j8NaKXDZtZ6 >> ? Hardware Class: cpu >> ? Arch: X86-64 >> ? Vendor: "CentaurHauls" >> ? Model: 6.15.13 "VIA Eden X2 U4200 @ 1.0+ GHz" >> ? Features: >> fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,rep_good,nopl,cpuid,pni,monitor,vmx,est,tm2,ssse3,cx16,xtpr,sse4_1,popcnt,rng,rng_en,ace,ace_en,ace2,phe,phe_en,pmm,pmm_en,lahf_lm,pti,tpr_shadow,vnmi,ida >> ? Clock: 800 MHz >> ? BogoMips: 2000.20 >> ? Cache: 1024 kb >> ? Units/Processor: 4 >> ? Config Status: cfg=new, avail=yes, need=no, active=unknown >> $ >> >> ##### >> $ hwinfo --gfxcard >> 12: PCI 01.0: 0300 VGA compatible controller (VGA)????????????? >> ? [Created at pci.386] >> ? Unique ID: vSkL.wdvg1Nualz4 >> ? SysFS ID: /devices/pci0000:00/0000:00:01.0 >> ? SysFS BusID: 0000:00:01.0 >> ? Hardware Class: graphics card >> ? Model: "VIA VX900 Graphics [Chrome9 HD]" >> ? Vendor: pci 0x1106 "VIA Technologies, Inc." >> ? Device: pci 0x7122 "VX900 Graphics [Chrome9 HD]" >> ? SubVendor: pci 0x6d86 >> ? SubDevice: pci 0x62cc >> ? Memory Range: 0xf9000000-0xf9ffffff (rw,non-prefetchable) >> ? Memory Range: 0xf8000000-0xf8ffffff (rw,non-prefetchable) >> ? Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) >> ? Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) >> ? IRQ: 11 (no events) >> ? I/O Port: 0x00 (rw) >> ? Module Alias: "pci:v00001106d00007122sv00006D86sd000062CCbc03sc00i00" >> ? Driver Info #0: >> ??? Driver Status: viafb is not active >> ??? Driver Activation Cmd: "modprobe viafb" >> ? Config Status: cfg=new, avail=yes, need=no, active=unknown >> >> Primary display adapter: #12 >> >> >> ##### >> grubcommand line >> "quiet splash nomodeset video=VGA-1:e >> drm_kms_helper.edid_firmware=VGA-1:edid/1280x1024.bin" >> >> ##### >> /etc/X11/xorg.conf >> >> Section "ServerLayout" >> ??? Identifier??? "Layout-0" >> ??? Screen??? ??? "Screen-0" >> EndSection >> >> Section "Screen" >> ??? Identifier??? "Screen-0" >> ??? Device??? ??? "Device-0" >> ??? Monitor??? ??? "Monitor-0" >> ??? DefaultDepth??? 32 >> ??? Subsection??? "Display" >> ??? ??? #Depth??? 24 >> ??? ??? Depth??? 32 >> ??? ??? Virtual??? 1920??? 1080 >> ??? ??? #Virtual??? 2560??? 1440 >> ??? ??? #Virtual??? 2560??? 1600 >> ??? EndSubsection >> EndSection >> >> Section "Device" >> ??? Identifier??? "Device-0" >> ??? Driver??? ??? "openchrome" >> ??? BusID??? ??? "PCI:0:1:0" >> ??? Option??? ??? "ModeDebug"??? ??? "true" >> ??? Option??? ??? "ActiveDevice"??? ??? "VGA-1"??? ??? # not used >> ??? Option??? ??? "ExaScratchSize"??? "8192"??? ??? # >> https://www.freedesktop.org/wiki/Openchrome/Configuration/ >> ??? Option??? ??? "MaxDRIMem"??? ??? "16384"??? ??? # >> https://www.freedesktop.org/wiki/Openchrome/Configuration/ >> ??? Option??? ??? "MigrationHeuristic"??? "greedy"??? # >> https://www.freedesktop.org/wiki/Openchrome/Configuration/ >> ??? Option??? ??? "Monitor-VGA-1"??? ??? "Monitor-0"??? # >> EndSection >> >> Section "Monitor" >> ??? Identifier??? "Monitor-0" >> ??? #Option??? ??? "PreferredMode"??? ??? "1920x1080" >> ??? Option??? ??? "PreferredMode"??? ??? "1280x1024"??? # not used >> ??? Option??? ??? "DPMS"??? ??? ??? "true" >> ??? #Option??? ??? "Swlinktraining"??? "true"??? ??? # not used >> EndSection >> >> Section "Modes" >> ??? Identifier??? "Modes-0" >> ??? #Modeline??? "1280x1024"??? 109.00??? 1280 1368 1496 1712??? 1024 >> 1027 1034 1063??? -hsync??? +vsync >> ??? Modeline??? "1280x1024"??? 108.00??? 1280 1368 1496 1712??? 1024 >> 1027 1034 1062??? -hsync??? +vsync >> ??? #Modeline??? "1920x1080"??? 175.50??? 1920 1968 2000 2080??? 1080 >> 1083 1088 1111??? +hsync??? -vsync >> ??? Modeline??? "1920x1080"??? 175.50??? 1920 2048 2248 2576??? 1080 >> 1083 1088 1121??? -hsync +vsync >> EndSection >> >> Section "Extensions" >> ??? Option??? "Composite"??? "true" >> EndSection >> >> >> ##### >> /var/log/Xorg.0.log >> >> [??? 25.245] >> X.Org X Server 1.20.8 >> X Protocol Version 11, Revision 0 >> [??? 25.245] Build Operating System: Linux 4.15.0-115-generic x86_64 Ubuntu >> [??? 25.245] Current Operating System: Linux ws-ub-42 5.4.0-51-generic >> #56-Ubuntu SMP Mon Oct 5 14:28:49 UTC 2020 x86_64 >> [??? 25.245] Kernel command line: >> BOOT_IMAGE=/boot/vmlinuz-5.4.0-51-generic >> root=UUID=07ab2756-f356-4058-ae7d-108a3d097463 ro quiet splash nomodeset >> video=VGA-1:e drm_kms_helper.edid_firmware=VGA-1:edid/1280x1024.bin >> vt.handoff=7 >> [??? 25.248] Build Date: 04 September 2020? 01:34:27PM >> [??? 25.248] xorg-server 2:1.20.8-2ubuntu2.4 (For technical support >> please see http://www.ubuntu.com/support) >> [??? 25.248] Current version of pixman: 0.38.4 >> [??? 25.248] ??? Before reporting problems, check http://wiki.x.org >> ??? to make sure that you have the latest version. >> [??? 25.248] Markers: (--) probed, (**) from config file, (==) default >> setting, >> ??? (++) from command line, (!!) notice, (II) informational, >> ??? (WW) warning, (EE) error, (NI) not implemented, (??) unknown. >> [??? 25.249] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 17 >> 16:41:46 2020 >> [??? 25.265] (==) Using config file: "/etc/X11/xorg.conf" >> [??? 25.265] (==) Using system config directory "/usr/share/X11/xorg.conf.d" >> [??? 25.271] (==) ServerLayout "Layout-0" >> [??? 25.271] (**) |-->Screen "Screen-0" (0) >> [??? 25.271] (**) |?? |-->Monitor "Monitor-0" >> [??? 25.273] (**) |?? |-->Device "Device-0" >> [??? 25.274] (==) Automatically adding devices >> [??? 25.274] (==) Automatically enabling devices >> [??? 25.274] (==) Automatically adding GPU devices >> [??? 25.274] (==) Automatically binding GPU devices >> [??? 25.274] (==) Max clients allowed: 256, resource mask: 0x1fffff >> [??? 25.279] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not >> exist. >> [??? 25.279] ??? Entry deleted from font path. >> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not >> exist. >> [??? 25.280] ??? Entry deleted from font path. >> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not >> exist. >> [??? 25.280] ??? Entry deleted from font path. >> [??? 25.280] (WW) The directory "/usr/share/fonts/X11/100dpi" does not >> exist. >> [??? 25.281] ??? Entry deleted from font path. >> [??? 25.281] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. >> [??? 25.281] ??? Entry deleted from font path. >> [??? 25.281] (==) FontPath set to: >> ??? /usr/share/fonts/X11/misc, >> ??? /usr/share/fonts/X11/Type1, >> ??? built-ins >> [??? 25.281] (==) ModulePath set to "/usr/lib/xorg/modules" >> [??? 25.281] (**) Extension "Composite" is enabled >> [??? 25.281] (II) The server relies on udev to provide the list of input >> devices. >> ??? If no devices become available, reconfigure udev or disable >> AutoAddDevices. >> [??? 25.281] (II) Loader magic: 0x558a187a3020 >> [??? 25.281] (II) Module ABI versions: >> [??? 25.281] ??? X.Org ANSI C Emulation: 0.4 >> [??? 25.281] ??? X.Org Video Driver: 24.1 >> [??? 25.281] ??? X.Org XInput driver : 24.1 >> [??? 25.281] ??? X.Org Server Extension : 10.0 >> [??? 25.284] (++) using VT number 7 >> >> [??? 25.285] (II) systemd-logind: logind integration requires -keeptty >> and -keeptty was not provided, disabling logind integration >> [??? 25.321] (--) PCI:*(0@0:1:0) 1106:7122:6d86:62cc rev 0, Mem @ >> 0xf9000000/16777216, 0xf8000000/16777216, 0xd0000000/268435456, BIOS @ >> 0x????????/131072 >> [??? 25.322] (II) LoadModule: "glx" >> [??? 25.328] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so >> [??? 25.364] (II) Module glx: vendor="X.Org Foundation" >> [??? 25.364] ??? compiled for 1.20.8, module version = 1.0.0 >> [??? 25.364] ??? ABI class: X.Org Server Extension, version 10.0 >> [??? 25.364] (II) LoadModule: "openchrome" >> [??? 25.367] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so >> [??? 25.376] (II) Module openchrome: >> vendor="https://www.freedesktop.org/wiki/Openchrome/"; >> [??? 25.376] ??? compiled for 1.20.0, module version = 0.6.0 >> [??? 25.376] ??? Module class: X.Org Video Driver >> [??? 25.376] ??? ABI class: X.Org Video Driver, version 24.0 >> [??? 25.376] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, >> ??? KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800, >> ??? PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700, >> ??? CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890, >> ??? P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900 >> [??? 25.378] (!!) VIA Technologies does not support this driver in any way. >> [??? 25.378] (!!) For support, please refer to >> https://www.freedesktop.org/wiki/Openchrome/. >> [??? 25.378] (!!) (openchrome 0.6.0 release) >> [??? 25.378] (II) CHROME(0): viaPreInit >> [??? 25.378] (II) CHROME(0): VIAGetRec >> [??? 25.378] (--) CHROME(0): Chipset: VX900 >> [??? 25.384] (--) CHROME(0): Chipset revision: 0 >> [??? 25.575] (EE) CHROME(0): [drm] Failed to open DRM device for >> pci:0000:00:01.0: No such file or directory >> [??? 25.576] (II) Loading sub module "vgahw" >> [??? 25.576] (II) LoadModule: "vgahw" >> [??? 25.577] (II) Loading /usr/lib/xorg/modules/libvgahw.so >> [??? 25.578] (II) Module vgahw: vendor="X.Org Foundation" >> [??? 25.578] ??? compiled for 1.20.8, module version = 0.1.0 >> [??? 25.579] ??? ABI class: X.Org Video Driver, version 24.1 >> [??? 25.579] (--) CHROME(0): Probed amount of VideoRAM = 262144 kB >> [??? 25.579] (II) CHROME(0): Entered viaMapMMIO. >> [??? 25.579] (--) CHROME(0): Mapping MMIO at address 0xF8000000 with >> size 52 KB. >> [??? 25.579] (--) CHROME(0): Mapping 2D Host BitBLT space at address >> 0xF8200000 with size 2048 KB. >> [??? 25.579] (--) CHROME(0): Mapping the frame buffer at address >> 0xD0000000 with size 262144 KB. >> [??? 25.586] (--) CHROME(0): Frame buffer start address: 0x7f49ef542000, >> free start: 0x0 end: 0x10000000 >> [??? 25.586] (II) CHROME(0): Entered viaMMIOEnable. >> [??? 25.587] (II) CHROME(0): Exiting viaMMIOEnable. >> [??? 25.587] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 >> [??? 25.587] (II) CHROME(0): Exiting viaMapMMIO. >> [??? 25.587] (**) CHROME(0): Depth 32, (--) framebuffer bpp 32 >> [??? 25.587] (==) CHROME(0): RGB weight 888 >> [??? 25.587] (==) CHROME(0): Default visual is TrueColor >> [??? 25.587] (II) CHROME(0): VIASetupDefaultOptions - Setting up default >> chipset options. >> [??? 25.587] (**) CHROME(0): Option "ExaScratchSize" "8192" >> [??? 25.587] (**) CHROME(0): Option "MaxDRIMem" "16384" >> [??? 25.587] (==) CHROME(0): Shadow framebuffer is disabled. >> [??? 25.587] (==) CHROME(0): Hardware acceleration is enabled. >> [??? 25.587] (==) CHROME(0): Using EXA acceleration architecture. >> [??? 25.588] (==) CHROME(0): EXA composite acceleration enabled. >> [??? 25.591] (**) CHROME(0): EXA scratch area size is 8192 kB. >> [??? 25.591] (==) CHROME(0): Using hardware two-color cursors and >> software full-color cursors. >> [??? 25.591] (==) CHROME(0): GPU virtual command queue will be enabled. >> [??? 25.592] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled. >> [??? 25.592] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled. >> [??? 25.592] (==) CHROME(0): PCI DMA will not be used for XV image >> transfer if DRI is enabled. >> [??? 25.592] (==) CHROME(0): Xv Bandwidth check is enabled. >> [??? 25.592] (**) CHROME(0): Will impose a 16384 kB limit on video RAM >> reserved for DRI. >> [??? 25.592] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory. >> [??? 25.592] (==) CHROME(0): TV dotCrawl is disabled. >> [??? 25.592] (==) CHROME(0): TV deflicker is set to 0. >> [??? 25.592] (==) CHROME(0): No default TV type is set. >> [??? 25.592] (==) CHROME(0): No default TV output signal type is set. >> [??? 25.592] (==) CHROME(0): Will not print VGA registers. >> [??? 25.592] (==) CHROME(0): Will not scan I2C buses. >> [??? 25.592] (II) CHROME(0): Detected MemClk 10 >> [??? 25.592] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 10 >> [??? 25.592] (II) CHROME(0): Detected TV standard: NTSC. >> [??? 25.592] (II) Loading sub module "ramdac" >> [??? 25.593] (II) LoadModule: "ramdac" >> [??? 25.593] (II) Module "ramdac" already built-in >> [??? 25.593] (II) Loading sub module "i2c" >> [??? 25.593] (II) LoadModule: "i2c" >> [??? 25.593] (II) Module "i2c" already built-in >> [??? 25.593] (II) CHROME(0): Entered ViaI2CInit. >> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus1Init. >> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 1" initialized. >> [??? 25.593] (II) CHROME(0): Exiting ViaI2CBus1Init. >> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus2Init. >> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 2" initialized. >> [??? 25.593] (II) CHROME(0): Exiting ViaI2CBus2Init. >> [??? 25.593] (II) CHROME(0): Entered ViaI2CBus3Init. >> [??? 25.593] (II) CHROME(0): I2C bus "I2C Bus 3" initialized. >> [??? 25.594] (II) CHROME(0): Exiting ViaI2CBus3Init. >> [??? 25.594] (II) CHROME(0): Exiting ViaI2CInit. >> [??? 25.594] (II) Loading sub module "ddc" >> [??? 25.594] (II) LoadModule: "ddc" >> [??? 25.594] (II) Module "ddc" already built-in >> [??? 25.594] (II) CHROME(0): Entered viaOutputDetect. >> [??? 25.594] (II) CHROME(0): Entered viaProbePinStrapping. >> [??? 25.594] (II) CHROME(0): Probing VIA Technologies IGP pin strapping >> . . . >> [??? 25.594] (II) CHROME(0): SR5A: 0x00 >> [??? 25.594] (II) CHROME(0): Setting 3C5.5A[0] to 0. >> [??? 25.594] (II) CHROME(0): SR12: 0x00 >> [??? 25.594] (II) CHROME(0): SR13: 0x00 >> [??? 25.594] (II) CHROME(0): Setting 3C5.5A[0] to 1. >> [??? 25.594] (II) CHROME(0): SR12: 0x00 >> [??? 25.594] (II) CHROME(0): SR13: 0x00 >> [??? 25.595] (II) CHROME(0): LVDS1 + LVDS2 detected. >> [??? 25.595] (II) CHROME(0): Exiting viaProbePinStrapping. >> [??? 25.595] (II) CHROME(0): Entered via_analog_init. >> [??? 25.595] (II) CHROME(0): Output VGA-1 using monitor section Monitor-0 >> [??? 25.595] (**) CHROME(0): Option "PreferredMode" "1280x1024" >> [??? 25.595] (II) CHROME(0): Exiting via_analog_init. >> [??? 25.595] (II) CHROME(0): Entered via_tv_init. >> [??? 25.597] (--) CHROME(0): Did not detect a TV encoder. >> [??? 25.599] (II) CHROME(0): Exiting via_tv_init. >> [??? 25.599] (II) CHROME(0): Entered via_dvi_init. >> [??? 25.599] (II) CHROME(0): Entered viaTMDSInit. >> [??? 25.599] (II) CHROME(0): SR13: 0x00 >> [??? 25.599] (II) CHROME(0): Integrated TMDS transmitter not found. >> [??? 25.599] (II) CHROME(0): Exiting viaTMDSInit. >> [??? 25.599] (II) CHROME(0): Integrated TMDS transmitter for DVI not found. >> [??? 25.599] (II) CHROME(0): Probing I2C Bus 2 for VT1632. >> [??? 25.599] (II) CHROME(0): Entered viaVT1632Init. >> [??? 25.600] (--) CHROME(0): I2C device not found. >> [??? 25.600] (II) CHROME(0): Exiting viaVT1632Init. >> [??? 25.600] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use. >> [??? 25.600] (II) CHROME(0): Probing I2C Bus 3 for VT1632. >> [??? 25.600] (II) CHROME(0): Entered viaVT1632Init. >> [??? 25.601] (--) CHROME(0): I2C device not found. >> [??? 25.601] (II) CHROME(0): Exiting viaVT1632Init. >> [??? 25.601] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use. >> [??? 25.601] (II) CHROME(0): Probing I2C Bus 2 for SiI 164. >> [??? 25.601] (II) CHROME(0): Entered viaSiI164Init. >> [??? 25.602] (--) CHROME(0): I2C device not found. >> [??? 25.602] (II) CHROME(0): Exiting viaSiI164Init. >> [??? 25.602] (II) CHROME(0): I2C Bus 2 was not initialized for DVI use. >> [??? 25.602] (II) CHROME(0): Probing I2C Bus 3 for SiI 164. >> [??? 25.602] (II) CHROME(0): Entered viaSiI164Init. >> [??? 25.603] (--) CHROME(0): I2C device not found. >> [??? 25.603] (II) CHROME(0): Exiting viaSiI164Init. >> [??? 25.603] (II) CHROME(0): I2C Bus 3 was not initialized for DVI use. >> [??? 25.603] (II) CHROME(0): Exiting via_dvi_init. >> [??? 25.603] (II) CHROME(0): Exiting viaOutputDetect. >> [??? 25.603] (**) CHROME(0): Option "ModeDebug" "true" >> [??? 25.603] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1. >> [??? 25.603] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at >> address 0xA0. >> [??? 25.624] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1. >> [??? 25.624] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2. >> [??? 25.624] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at >> address 0xA0. >> [??? 25.628] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2. >> [??? 25.628] (--) CHROME(0): Now perform manual detection of a VGA monitor. >> [??? 25.631] (II) CHROME(0): EDID for output VGA-1 >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected >> [??? 25.631] (WW) CHROME(0): No outputs definitely connected, trying >> again... >> [??? 25.631] (II) CHROME(0): Output VGA-1 disconnected >> [??? 25.631] (WW) CHROME(0): Unable to find connected outputs - setting >> 1024x768 initial framebuffer >> [??? 25.631] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0) >> [??? 25.631] (==) CHROME(0): DPI set to (96, 96) >> [??? 25.631] (II) Loading sub module "fb" >> [??? 25.631] (II) LoadModule: "fb" >> [??? 25.632] (II) Loading /usr/lib/xorg/modules/libfb.so >> [??? 25.638] (II) Module fb: vendor="X.Org Foundation" >> [??? 25.638] ??? compiled for 1.20.8, module version = 1.0.0 >> [??? 25.638] ??? ABI class: X.Org ANSI C Emulation, version 0.4 >> [??? 25.638] (II) Loading sub module "exa" >> [??? 25.638] (II) LoadModule: "exa" >> [??? 25.639] (II) Loading /usr/lib/xorg/modules/libexa.so >> [??? 25.641] (II) Module exa: vendor="X.Org Foundation" >> [??? 25.642] ??? compiled for 1.20.8, module version = 2.6.0 >> [??? 25.642] ??? ABI class: X.Org Video Driver, version 24.1 >> [??? 25.642] (II) CHROME(0): VIAScreenInit >> [??? 25.642] (II) CHROME(0): Frame Buffer From (0,0) To (1920,32767) >> [??? 25.642] (II) CHROME(0): Using 31687 lines for offscreen memory. >> [??? 25.642] 8294400 bytes of Linear memory allocated at f000000, handle >> 94051632263088 >> [??? 25.642] (II) CHROME(0): Entered umsAccelInit. >> [??? 25.642] 262144 bytes of Linear memory allocated at f7e9000, handle >> 94051632276352 >> [??? 25.642] (II) CHROME(0): Initializing the 2D engine. >> [??? 25.642] (II) CHROME(0): Initializing the 3D engine. >> [??? 25.643] 32 bytes of Linear memory allocated at f829000, handle >> 94051632276496 >> [??? 25.643] 32 bytes of Linear memory allocated at f829080, handle >> 94051632276784 >> [??? 25.643] (II) CHROME(0): Exiting umsAccelInit. >> [??? 25.644] (II) CHROME(0): - Visuals set up >> [??? 25.645] (II) CHROME(0): - B & W >> [??? 25.647] (**) CHROME(0): Option "MigrationHeuristic" "greedy" >> [??? 25.647] (II) EXA(0): Offscreen pixmap area of 260141056 bytes >> [??? 25.647] (II) EXA(0): Driver registered support for the following >> operations: >> [??? 25.647] (II)???????? Solid >> [??? 25.647] (II)???????? Copy >> [??? 25.647] (II)???????? Composite (RENDER acceleration) >> [??? 25.647] (II) CHROME(0): [EXA] Enabled EXA acceleration. >> [??? 25.647] (==) CHROME(0): Backing store enabled >> [??? 25.647] (II) CHROME(0): - Backing store set up >> [??? 25.649] (II) CHROME(0): - SW cursor set up >> [??? 25.649] (II) CHROME(0): HWCursor ARGB enabled >> [??? 25.649] 16384 bytes of Linear memory allocated at f829100, handle >> 94051632300352 >> [??? 25.649] 16384 bytes of Linear memory allocated at f82d100, handle >> 94051632300432 >> [??? 25.650] (II) CHROME(0): - Def Color map set up >> [??? 25.651] (II) CHROME(0): - Palette loaded >> [??? 25.651] (II) CHROME(0): - Color maps etc. set up >> [??? 25.651] (**) CHROME(0): DPMS enabled >> [??? 25.651] (II) CHROME(0): - DPMS set up >> [??? 25.651] (II) CHROME(0): VIAEnterVT >> [??? 25.651] (II) CHROME(0): Entered viaIGA1Save. >> [??? 25.652] (II) CHROME(0): Saving sequencer registers. >> [??? 25.652] (II) CHROME(0): Finished saving sequencer registers. >> [??? 25.652] (II) CHROME(0): Saving IGA1 registers. >> [??? 25.652] (II) CHROME(0): Finished saving IGA1 registers. >> [??? 25.652] (II) CHROME(0): Exiting viaIGA1Save. >> [??? 25.652] (II) CHROME(0): Entered iga2_crtc_save. >> [??? 25.652] (II) CHROME(0): Entered viaIGA2Save. >> [??? 25.652] (II) CHROME(0): Saving IGA2 registers. >> [??? 25.652] (II) CHROME(0): Finished saving IGA2 registers. >> [??? 25.652] (II) CHROME(0): Exiting viaIGA2Save. >> [??? 25.652] (II) CHROME(0): Exiting iga2_crtc_save. >> [??? 25.652] (II) CHROME(0): Entered via_analog_dpms. >> [??? 25.652] (II) CHROME(0): Entered viaAnalogOutput. >> [??? 25.653] (II) CHROME(0): Analog VGA Output: Off >> [??? 25.653] (II) CHROME(0): Exiting viaAnalogOutput. >> [??? 25.653] (II) CHROME(0): Exiting via_analog_dpms. >> [??? 25.653] (II) CHROME(0): Entered iga1_crtc_dpms. >> [??? 25.653] (II) CHROME(0): Entered viaIGA1DPMSControl. >> [??? 25.653] (II) CHROME(0): Exiting viaIGA1DPMSControl. >> [??? 25.653] (II) CHROME(0): Exiting iga1_crtc_dpms. >> [??? 25.653] (II) CHROME(0): Entered iga2_crtc_dpms. >> [??? 25.653] (II) CHROME(0): Entered viaIGA2DisplayOutput. >> [??? 25.653] (II) CHROME(0): IGA2 Display Output: Off >> [??? 25.653] (II) CHROME(0): Exiting viaIGA2DisplayOutput. >> [??? 25.653] (II) CHROME(0): Exiting iga2_crtc_dpms. >> [??? 25.653] (II) CHROME(0): Entered via_analog_dpms. >> [??? 25.653] (II) CHROME(0): Entered viaAnalogOutput. >> [??? 25.653] (II) CHROME(0): Analog VGA Output: Off >> [??? 25.653] (II) CHROME(0): Exiting viaAnalogOutput. >> [??? 25.653] (II) CHROME(0): Exiting via_analog_dpms. >> [??? 25.653] (II) CHROME(0): Entered iga1_crtc_dpms. >> [??? 25.654] (II) CHROME(0): Entered viaIGA1DPMSControl. >> [??? 25.654] (II) CHROME(0): Exiting viaIGA1DPMSControl. >> [??? 25.654] (II) CHROME(0): Exiting iga1_crtc_dpms. >> [??? 25.654] (II) CHROME(0): Entered iga2_crtc_dpms. >> [??? 25.654] (II) CHROME(0): Entered viaIGA2DisplayOutput. >> [??? 25.654] (II) CHROME(0): IGA2 Display Output: Off >> [??? 25.654] (II) CHROME(0): Exiting viaIGA2DisplayOutput. >> [??? 25.654] (II) CHROME(0): Exiting iga2_crtc_dpms. >> [??? 25.654] DRM memory allocation failed -6 >> [??? 25.654] (II) CHROME(0): Using default xfree86 memcpy for video. >> [??? 25.654] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset. >> [??? 25.654] (WW) CHROME(0): Option "ActiveDevice" is not used >> [??? 25.654] (WW) CHROME(0): Option "PreferredMode" is not used >> [??? 25.655] (II) CHROME(0): - Done >> [??? 25.655] (II) Initializing extension Generic Event Extension >> [??? 25.655] (II) Initializing extension SHAPE >> [??? 25.656] (II) Initializing extension MIT-SHM >> [??? 25.657] (II) Initializing extension XInputExtension >> [??? 25.660] (II) Initializing extension XTEST >> [??? 25.661] (II) Initializing extension BIG-REQUESTS >> [??? 25.661] (II) Initializing extension SYNC >> [??? 25.662] (II) Initializing extension XKEYBOARD >> [??? 25.663] (II) Initializing extension XC-MISC >> [??? 25.663] (II) Initializing extension SECURITY >> [??? 25.664] (II) Initializing extension XFIXES >> [??? 25.665] (II) Initializing extension RENDER >> [??? 25.665] (II) Initializing extension RANDR >> [??? 25.666] (II) Initializing extension COMPOSITE >> [??? 25.667] (II) Initializing extension DAMAGE >> [??? 25.671] (II) Initializing extension MIT-SCREEN-SAVER >> [??? 25.672] (II) Initializing extension DOUBLE-BUFFER >> [??? 25.673] (II) Initializing extension RECORD >> [??? 25.673] (II) Initializing extension DPMS >> [??? 25.674] (II) Initializing extension Present >> [??? 25.674] (II) Initializing extension DRI3 >> [??? 25.675] (II) Initializing extension X-Resource >> [??? 25.675] (II) Initializing extension XVideo >> [??? 25.676] (II) Initializing extension XVideo-MotionCompensation >> [??? 25.676] (II) Initializing extension SELinux >> [??? 25.676] (II) SELinux: Disabled on system >> [??? 25.676] (II) Initializing extension GLX >> [??? 25.677] (II) AIGLX: Screen 0 is not DRI2 capable >> [??? 26.147] (II) IGLX: Loaded and initialized swrast >> [??? 26.149] (II) GLX: Initialized DRISWRAST GL provider for screen 0 >> [??? 26.149] (II) Initializing extension XFree86-VidModeExtension >> [??? 26.150] (II) Initializing extension XFree86-DGA >> [??? 26.151] (II) Initializing extension XFree86-DRI >> [??? 26.152] (II) Initializing extension DRI2 >> [??? 26.542] (II) config/udev: Adding input device Power Button >> (/dev/input/event2) >> [??? 26.543] (**) Power Button: Applying InputClass "libinput keyboard >> catchall" >> [??? 26.543] (II) LoadModule: "libinput" >> [??? 26.545] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so >> [??? 26.561] (II) Module libinput: vendor="X.Org Foundation" >> [??? 26.561] ??? compiled for 1.20.4, module version = 0.29.0 >> [??? 26.561] ??? Module class: X.Org XInput Driver >> [??? 26.561] ??? ABI class: X.Org XInput driver, version 24.1 >> [??? 26.561] (II) Using input driver 'libinput' for 'Power Button' >> [??? 26.561] (**) Power Button: always reports core events >> [??? 26.561] (**) Option "Device" "/dev/input/event2" >> [??? 26.561] (**) Option "_source" "server/udev" >> [??? 26.582] (II) event2? - Power Button: is tagged by udev as: Keyboard >> [??? 26.583] (II) event2? - Power Button: device is a keyboard >> [??? 26.583] (II) event2? - Power Button: device removed >> [??? 26.600] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" >> [??? 26.600] (II) XINPUT: Adding extended input device "Power Button" >> (type: KEYBOARD, id 6) >> [??? 26.600] (**) Option "xkb_model" "pc105" >> [??? 26.600] (**) Option "xkb_layout" "de" >> [??? 26.739] (II) event2? - Power Button: is tagged by udev as: Keyboard >> [??? 26.740] (II) event2? - Power Button: device is a keyboard >> [??? 26.744] (II) config/udev: Adding input device Video Bus >> (/dev/input/event3) >> [??? 26.745] (**) Video Bus: Applying InputClass "libinput keyboard >> catchall" >> [??? 26.745] (II) Using input driver 'libinput' for 'Video Bus' >> [??? 26.745] (**) Video Bus: always reports core events >> [??? 26.745] (**) Option "Device" "/dev/input/event3" >> [??? 26.745] (**) Option "_source" "server/udev" >> [??? 26.752] (II) event3? - Video Bus: is tagged by udev as: Keyboard >> [??? 26.752] (II) event3? - Video Bus: device is a keyboard >> [??? 26.753] (II) event3? - Video Bus: device removed >> [??? 26.776] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event3" >> [??? 26.776] (II) XINPUT: Adding extended input device "Video Bus" >> (type: KEYBOARD, id 7) >> [??? 26.776] (**) Option "xkb_model" "pc105" >> [??? 26.776] (**) Option "xkb_layout" "de" >> [??? 26.784] (II) event3? - Video Bus: is tagged by udev as: Keyboard >> [??? 26.784] (II) event3? - Video Bus: device is a keyboard >> [??? 26.788] (II) config/udev: Adding input device Power Button >> (/dev/input/event1) >> [??? 26.788] (**) Power Button: Applying InputClass "libinput keyboard >> catchall" >> [??? 26.789] (II) Using input driver 'libinput' for 'Power Button' >> [??? 26.789] (**) Power Button: always reports core events >> [??? 26.789] (**) Option "Device" "/dev/input/event1" >> [??? 26.789] (**) Option "_source" "server/udev" >> [??? 26.795] (II) event1? - Power Button: is tagged by udev as: Keyboard >> [??? 26.795] (II) event1? - Power Button: device is a keyboard >> [??? 26.796] (II) event1? - Power Button: device removed >> [??? 26.812] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" >> [??? 26.812] (II) XINPUT: Adding extended input device "Power Button" >> (type: KEYBOARD, id 8) >> [??? 26.812] (**) Option "xkb_model" "pc105" >> [??? 26.812] (**) Option "xkb_layout" "de" >> [??? 26.819] (II) event1? - Power Button: is tagged by udev as: Keyboard >> [??? 26.820] (II) event1? - Power Button: device is a keyboard >> [??? 26.824] (II) config/udev: Adding input device Sleep Button >> (/dev/input/event0) >> [??? 26.824] (**) Sleep Button: Applying InputClass "libinput keyboard >> catchall" >> [??? 26.824] (II) Using input driver 'libinput' for 'Sleep Button' >> [??? 26.824] (**) Sleep Button: always reports core events >> [??? 26.824] (**) Option "Device" "/dev/input/event0" >> [??? 26.824] (**) Option "_source" "server/udev" >> [??? 26.830] (II) event0? - Sleep Button: is tagged by udev as: Keyboard >> [??? 26.831] (II) event0? - Sleep Button: device is a keyboard >> [??? 26.831] (II) event0? - Sleep Button: device removed >> [??? 26.836] (**) Option "config_info" >> "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" >> [??? 26.836] (II) XINPUT: Adding extended input device "Sleep Button" >> (type: KEYBOARD, id 9) >> [??? 26.836] (**) Option "xkb_model" "pc105" >> [??? 26.837] (**) Option "xkb_layout" "de" >> [??? 26.844] (II) event0? - Sleep Button: is tagged by udev as: Keyboard >> [??? 26.844] (II) event0? - Sleep Button: device is a keyboard >> [??? 26.847] (II) config/udev: Adding input device HD-Audio Generic >> HDMI/DP,pcm=3 (/dev/input/event8) >> [??? 26.848] (II) No input driver specified, ignoring this device. >> [??? 26.848] (II) This device may have been added with another device file. >> [??? 26.855] (II) config/udev: Adding input device Logitech USB Optical >> Mouse (/dev/input/event4) >> [??? 26.855] (**) Logitech USB Optical Mouse: Applying InputClass >> "libinput pointer catchall" >> [??? 26.855] (II) Using input driver 'libinput' for 'Logitech USB >> Optical Mouse' >> [??? 26.855] (**) Logitech USB Optical Mouse: always reports core events >> [??? 26.855] (**) Option "Device" "/dev/input/event4" >> [??? 26.855] (**) Option "_source" "server/udev" >> [??? 26.865] (II) event4? - Logitech USB Optical Mouse: is tagged by >> udev as: Mouse >> [??? 26.865] (II) event4? - Logitech USB Optical Mouse: device is a pointer >> [??? 26.866] (II) event4? - Logitech USB Optical Mouse: device removed >> [??? 26.900] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C077.0001/input/input7/event4" >> [??? 26.900] (II) XINPUT: Adding extended input device "Logitech USB >> Optical Mouse" (type: MOUSE, id 10) >> [??? 26.901] (**) Option "AccelerationScheme" "none" >> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0 >> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) acceleration >> factor: 2.000 >> [??? 26.901] (**) Logitech USB Optical Mouse: (accel) acceleration >> threshold: 4 >> [??? 26.911] (II) event4? - Logitech USB Optical Mouse: is tagged by >> udev as: Mouse >> [??? 26.912] (II) event4? - Logitech USB Optical Mouse: device is a pointer >> [??? 26.917] (II) config/udev: Adding input device Logitech USB Optical >> Mouse (/dev/input/mouse0) >> [??? 26.917] (II) No input driver specified, ignoring this device. >> [??? 26.917] (II) This device may have been added with another device file. >> [??? 26.922] (II) config/udev: Adding input device Chicony HP Elite USB >> Keyboard (/dev/input/event5) >> [??? 26.922] (**) Chicony HP Elite USB Keyboard: Applying InputClass >> "libinput keyboard catchall" >> [??? 26.922] (II) Using input driver 'libinput' for 'Chicony HP Elite >> USB Keyboard' >> [??? 26.923] (**) Chicony HP Elite USB Keyboard: always reports core events >> [??? 26.923] (**) Option "Device" "/dev/input/event5" >> [??? 26.923] (**) Option "_source" "server/udev" >> [??? 26.933] (II) event5? - Chicony HP Elite USB Keyboard: is tagged by >> udev as: Keyboard >> [??? 26.934] (II) event5? - Chicony HP Elite USB Keyboard: device is a >> keyboard >> [??? 26.935] (II) event5? - Chicony HP Elite USB Keyboard: device removed >> [??? 26.944] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.0/0003:03F0:034A.0002/input/input8/event5" >> [??? 26.944] (II) XINPUT: Adding extended input device "Chicony HP Elite >> USB Keyboard" (type: KEYBOARD, id 11) >> [??? 26.944] (**) Option "xkb_model" "pc105" >> [??? 26.945] (**) Option "xkb_layout" "de" >> [??? 26.956] (II) event5? - Chicony HP Elite USB Keyboard: is tagged by >> udev as: Keyboard >> [??? 26.957] (II) event5? - Chicony HP Elite USB Keyboard: device is a >> keyboard >> [??? 26.964] (II) config/udev: Adding input device Chicony HP Elite USB >> Keyboard Consumer Control (/dev/input/event7) >> [??? 26.964] (**) Chicony HP Elite USB Keyboard Consumer Control: >> Applying InputClass "libinput keyboard catchall" >> [??? 26.964] (II) Using input driver 'libinput' for 'Chicony HP Elite >> USB Keyboard Consumer Control' >> [??? 26.964] (**) Chicony HP Elite USB Keyboard Consumer Control: always >> reports core events >> [??? 26.964] (**) Option "Device" "/dev/input/event7" >> [??? 26.964] (**) Option "_source" "server/udev" >> [??? 26.975] (II) event7? - Chicony HP Elite USB Keyboard Consumer >> Control: is tagged by udev as: Keyboard >> [??? 26.976] (II) event7? - Chicony HP Elite USB Keyboard Consumer >> Control: device is a keyboard >> [??? 26.977] (II) event7? - Chicony HP Elite USB Keyboard Consumer >> Control: device removed >> [??? 26.996] (II) libinput: Chicony HP Elite USB Keyboard Consumer >> Control: needs a virtual subdevice >> [??? 26.996] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input10/event7" >> [??? 26.996] (II) XINPUT: Adding extended input device "Chicony HP Elite >> USB Keyboard Consumer Control" (type: MOUSE, id 12) >> [??? 26.997] (**) Option "AccelerationScheme" "none" >> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control: >> (accel) selected scheme none/0 >> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control: >> (accel) acceleration factor: 2.000 >> [??? 26.997] (**) Chicony HP Elite USB Keyboard Consumer Control: >> (accel) acceleration threshold: 4 >> [??? 27.008] (II) event7? - Chicony HP Elite USB Keyboard Consumer >> Control: is tagged by udev as: Keyboard >> [??? 27.008] (II) event7? - Chicony HP Elite USB Keyboard Consumer >> Control: device is a keyboard >> [??? 27.015] (II) config/udev: Adding input device Chicony HP Elite USB >> Keyboard System Control (/dev/input/event6) >> [??? 27.015] (**) Chicony HP Elite USB Keyboard System Control: Applying >> InputClass "libinput keyboard catchall" >> [??? 27.015] (II) Using input driver 'libinput' for 'Chicony HP Elite >> USB Keyboard System Control' >> [??? 27.015] (**) Chicony HP Elite USB Keyboard System Control: always >> reports core events >> [??? 27.015] (**) Option "Device" "/dev/input/event6" >> [??? 27.015] (**) Option "_source" "server/udev" >> [??? 27.026] (II) event6? - Chicony HP Elite USB Keyboard System >> Control: is tagged by udev as: Keyboard >> [??? 27.026] (II) event6? - Chicony HP Elite USB Keyboard System >> Control: device is a keyboard >> [??? 27.028] (II) event6? - Chicony HP Elite USB Keyboard System >> Control: device removed >> [??? 27.044] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input9/event6" >> [??? 27.044] (II) XINPUT: Adding extended input device "Chicony HP Elite >> USB Keyboard System Control" (type: KEYBOARD, id 13) >> [??? 27.044] (**) Option "xkb_model" "pc105" >> [??? 27.044] (**) Option "xkb_layout" "de" >> [??? 27.056] (II) event6? - Chicony HP Elite USB Keyboard System >> Control: is tagged by udev as: Keyboard >> [??? 27.056] (II) event6? - Chicony HP Elite USB Keyboard System >> Control: device is a keyboard >> [??? 27.110] (**) Chicony HP Elite USB Keyboard Consumer Control: >> Applying InputClass "libinput keyboard catchall" >> [??? 27.111] (II) Using input driver 'libinput' for 'Chicony HP Elite >> USB Keyboard Consumer Control' >> [??? 27.111] (**) Chicony HP Elite USB Keyboard Consumer Control: always >> reports core events >> [??? 27.111] (**) Option "Device" "/dev/input/event7" >> [??? 27.111] (**) Option "_source" "_driver/libinput" >> [??? 27.111] (II) libinput: Chicony HP Elite USB Keyboard Consumer >> Control: is a virtual subdevice >> [??? 27.111] (**) Option "config_info" >> "udev:/sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/4-1:1.1/0003:03F0:034A.0003/input/input10/event7" >> [??? 27.111] (II) XINPUT: Adding extended input device "Chicony HP Elite >> USB Keyboard Consumer Control" (type: KEYBOARD, id 14) >> [??? 27.111] (**) Option "xkb_model" "pc105" >> [??? 27.112] (**) Option "xkb_layout" "de" >> >> >> > > _______________________________________________ openchrome-users mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://www.openchrome.org/trac/wiki/TOC
