Here's the Xorg.0.log and Xorg.0.log.old
---------- Forwarded message ---------- From: P Touchman <[email protected]> Date: Thu, Apr 19, 2018 at 6:26 AM Subject: VE-900 and Debian 9.3 openchrome getting a blank screen To: [email protected] Hi all, I was trying to run Debian 9.3 32 bit and use the openchrome on a VIA VE-900 board and I only get a blank screen. I installed debian to a hard drive on another system, and installed the openchrome server with synaptic, then moved the hard drive to the VE-900. https://packages.debian.org/stretch/x11/xserver-xorg-video-openchrome Once debian boots, I get a black screen. I can switch to text mode with CTRL+ALT+F1 and back to graphics with CTRL+ALT+F5. I tried both the VGA and HDMI ports on the VE-900 and both have black screens. In text mode I can log in to debian just fine, so I reckon something must be working...I looked very quickly at /var/log/Xorg.0.log and I could see that it was using openchrome. The VE-900 is in another location but I'll bring it home to get some more log information. Any ideas?
[ 21.243] X.Org X Server 1.19.2 Release Date: 2017-03-02 [ 21.243] X Protocol Version 11, Revision 0 [ 21.243] Build Operating System: Linux 4.9.0-4-amd64 i686 Debian [ 21.243] Current Operating System: Linux debian93silver 4.9.0-4-686 #1 SMP Debian 4.9.65-3 (2017-12-03) i686 [ 21.243] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-4-686 root=/dev/sda2 ro quiet [ 21.243] Build Date: 16 October 2017 08:12:56AM [ 21.243] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) [ 21.243] Current version of pixman: 0.34.0 [ 21.243] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.243] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.244] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 19 00:07:40 2018 [ 21.264] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.275] (==) No Layout section. Using the first Screen section. [ 21.276] (==) No screen section available. Using defaults. [ 21.276] (**) |-->Screen "Default Screen Section" (0) [ 21.276] (**) | |-->Monitor "<default monitor>" [ 21.281] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 21.281] (==) Automatically adding devices [ 21.281] (==) Automatically enabling devices [ 21.281] (==) Automatically adding GPU devices [ 21.281] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 21.320] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.320] Entry deleted from font path. [ 21.330] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 21.330] (==) ModulePath set to "/usr/lib/xorg/modules" [ 21.330] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.330] (II) Loader magic: 0x70f720 [ 21.330] (II) Module ABI versions: [ 21.330] X.Org ANSI C Emulation: 0.4 [ 21.330] X.Org Video Driver: 23.0 [ 21.331] X.Org XInput driver : 24.1 [ 21.331] X.Org Server Extension : 10.0 [ 21.332] (++) using VT number 7 [ 21.333] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 21.335] (--) PCI:*(0:0:1:0) 1106:7122:1019:3126 rev 0, Mem @ 0xfc000000/16777216, 0xfd000000/16777216, 0xd0000000/268435456, BIOS @ 0x????????/131072 [ 21.361] (II) LoadModule: "glx" [ 21.374] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 21.492] (II) Module glx: vendor="X.Org Foundation" [ 21.492] compiled for 1.19.2, module version = 1.0.0 [ 21.492] ABI class: X.Org Server Extension, version 10.0 [ 21.492] (==) Matched openchrome as autoconfigured driver 0 [ 21.492] (==) Matched modesetting as autoconfigured driver 1 [ 21.492] (==) Matched fbdev as autoconfigured driver 2 [ 21.492] (==) Matched vesa as autoconfigured driver 3 [ 21.492] (==) Assigned the driver to the xf86ConfigLayout [ 21.492] (II) LoadModule: "openchrome" [ 21.493] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so [ 21.516] (II) Module openchrome: vendor="http://www.freedesktop.org/wiki/Openchrome/"; [ 21.516] compiled for 1.19.1, module version = 0.5.0 [ 21.517] Module class: X.Org Video Driver [ 21.517] ABI class: X.Org Video Driver, version 23.0 [ 21.517] (II) LoadModule: "modesetting" [ 21.517] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 21.531] (II) Module modesetting: vendor="X.Org Foundation" [ 21.531] compiled for 1.19.2, module version = 1.19.2 [ 21.531] Module class: X.Org Video Driver [ 21.531] ABI class: X.Org Video Driver, version 23.0 [ 21.531] (II) LoadModule: "fbdev" [ 21.531] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 21.535] (II) Module fbdev: vendor="X.Org Foundation" [ 21.535] compiled for 1.19.0, module version = 0.4.4 [ 21.535] Module class: X.Org Video Driver [ 21.535] ABI class: X.Org Video Driver, version 23.0 [ 21.535] (II) LoadModule: "vesa" [ 21.535] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 21.545] (II) Module vesa: vendor="X.Org Foundation" [ 21.545] compiled for 1.19.0, module version = 2.3.4 [ 21.545] Module class: X.Org Video Driver [ 21.545] ABI class: X.Org Video Driver, version 23.0 [ 21.545] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800, PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700, CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890, P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900 [ 21.546] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 21.546] (II) FBDEV: driver for framebuffer: fbdev [ 21.546] (II) VESA: driver for VESA chipsets: vesa [ 21.549] (!!) VIA Technologies does not support this driver in any way. [ 21.549] (!!) For support, please refer to http://www.freedesktop.org/wiki/Openchrome/. [ 21.549] (!!) (openchrome 0.5.0 release) [ 21.549] (WW) Falling back to old probe method for modesetting [ 21.549] (EE) open /dev/dri/card0: No such file or directory [ 21.549] (WW) Falling back to old probe method for fbdev [ 21.549] (II) Loading sub module "fbdevhw" [ 21.549] (II) LoadModule: "fbdevhw" [ 21.549] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 21.575] (II) Module fbdevhw: vendor="X.Org Foundation" [ 21.575] compiled for 1.19.2, module version = 0.0.2 [ 21.575] ABI class: X.Org Video Driver, version 23.0 [ 21.575] (EE) open /dev/fb0: No such file or directory [ 21.576] (WW) Falling back to old probe method for vesa [ 21.576] (II) CHROME(0): viaPreInit [ 21.576] (II) CHROME(0): VIAGetRec [ 21.576] (--) CHROME(0): Chipset: VX900 [ 21.576] (--) CHROME(0): Chipset revision: 0 [ 21.714] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:00:01.0: No such file or directory [ 21.714] (II) Loading sub module "vgahw" [ 21.714] (II) LoadModule: "vgahw" [ 21.715] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 21.741] (II) Module vgahw: vendor="X.Org Foundation" [ 21.742] compiled for 1.19.2, module version = 0.1.0 [ 21.742] ABI class: X.Org Video Driver, version 23.0 [ 21.742] (--) CHROME(0): Probed amount of VideoRAM = 262144 kB [ 21.742] (II) CHROME(0): Entered viaMapMMIO. [ 21.742] (--) CHROME(0): Mapping MMIO at address 0xFD000000 with size 52 KB. [ 21.742] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xFD200000 with size 2048 KB. [ 21.742] (--) CHROME(0): Mapping the frame buffer at address 0xD0000000 with size 262144 KB. [ 21.743] (--) CHROME(0): Frame buffer start address: 0xa6a1d000, free start: 0x0 end: 0x10000000 [ 21.743] (II) CHROME(0): Entered viaMMIOEnable. [ 21.743] (II) CHROME(0): Exiting viaMMIOEnable. [ 21.743] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0 [ 21.743] (II) CHROME(0): Exiting viaMapMMIO. [ 21.743] (II) CHROME(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 21.743] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32 [ 21.743] (==) CHROME(0): RGB weight 888 [ 21.743] (==) CHROME(0): Default visual is TrueColor [ 21.743] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options. [ 21.743] (==) CHROME(0): Shadow framebuffer is disabled. [ 21.743] (==) CHROME(0): Hardware acceleration is enabled. [ 21.743] (==) CHROME(0): Using EXA acceleration architecture. [ 21.743] (==) CHROME(0): EXA composite acceleration enabled. [ 21.743] (==) CHROME(0): EXA scratch area size is 4096 kB. [ 21.744] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors. [ 21.744] (==) CHROME(0): GPU virtual command queue will be enabled. [ 21.744] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled. [ 21.744] (==) CHROME(0): AGP DMA will be disabled if DRI is enabled. [ 21.744] (==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled. [ 21.744] (==) CHROME(0): Xv Bandwidth check is enabled. [ 21.744] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI. [ 21.744] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory. [ 21.744] (==) CHROME(0): TV dotCrawl is disabled. [ 21.744] (==) CHROME(0): TV deflicker is set to 0. [ 21.744] (==) CHROME(0): No default TV type is set. [ 21.744] (==) CHROME(0): No default TV output signal type is set. [ 21.744] (==) CHROME(0): No default TV output port is set. [ 21.744] (==) CHROME(0): Will not print VGA registers. [ 21.744] (==) CHROME(0): Will not scan I2C buses. [ 21.744] (II) CHROME(0): Detected MemClk 10 [ 21.744] (II) CHROME(0): ViaGetMemoryBandwidth. Memory type: 10 [ 21.744] (II) CHROME(0): Detected TV standard: NTSC. [ 21.744] (II) Loading sub module "ramdac" [ 21.744] (II) LoadModule: "ramdac" [ 21.744] (II) Module "ramdac" already built-in [ 21.744] (II) Loading sub module "i2c" [ 21.744] (II) LoadModule: "i2c" [ 21.744] (II) Module "i2c" already built-in [ 21.744] (II) CHROME(0): Entered ViaI2CInit. [ 21.744] (II) CHROME(0): Entered ViaI2CBus1Init. [ 21.744] (II) CHROME(0): I2C bus "I2C Bus 1" initialized. [ 21.744] (II) CHROME(0): Exiting ViaI2CBus1Init. [ 21.744] (II) CHROME(0): Entered ViaI2CBus2Init. [ 21.744] (II) CHROME(0): I2C bus "I2C Bus 2" initialized. [ 21.744] (II) CHROME(0): Exiting ViaI2CBus2Init. [ 21.744] (II) CHROME(0): Entered ViaI2CBus3Init. [ 21.744] (II) CHROME(0): I2C bus "I2C Bus 3" initialized. [ 21.744] (II) CHROME(0): Exiting ViaI2CBus3Init. [ 21.744] (II) CHROME(0): Exiting ViaI2CInit. [ 21.744] (II) Loading sub module "ddc" [ 21.744] (II) LoadModule: "ddc" [ 21.744] (II) Module "ddc" already built-in [ 21.745] (II) CHROME(0): Entered viaOutputDetect. [ 21.745] (II) CHROME(0): Entered viaProbePinStrapping. [ 21.745] (II) CHROME(0): Probing VIA Technologies IGP pin strapping . . . [ 21.745] (II) CHROME(0): SR5A: 0x00 [ 21.745] (II) CHROME(0): Setting 3C5.5A[0] to 0. [ 21.745] (II) CHROME(0): SR12: 0x00 [ 21.745] (II) CHROME(0): SR13: 0x00 [ 21.745] (II) CHROME(0): Setting 3C5.5A[0] to 1. [ 21.745] (II) CHROME(0): SR12: 0x00 [ 21.745] (II) CHROME(0): SR13: 0x00 [ 21.745] (II) CHROME(0): LVDS1 + LVDS2 detected. [ 21.745] (II) CHROME(0): Exiting viaProbePinStrapping. [ 21.745] (II) CHROME(0): Entered via_analog_init. [ 21.745] (II) CHROME(0): Output VGA-1 has no monitor section [ 21.745] (II) CHROME(0): Exiting via_analog_init. [ 21.745] (II) CHROME(0): Entered via_tv_init. [ 21.746] (--) CHROME(0): Did not detect a TV encoder. [ 21.746] (II) CHROME(0): Exiting via_tv_init. [ 21.746] (II) CHROME(0): Entered via_dvi_init. [ 21.747] (--) CHROME(0): Did not find a possible external TMDS transmitter on I2C Bus 2 or I2C Bus 3. [ 21.747] (II) CHROME(0): Exiting via_dvi_init. [ 21.747] (II) CHROME(0): Exiting viaOutputDetect. [ 21.747] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 1. [ 21.747] (II) CHROME(0): I2C device "I2C Bus 1:ddc2" registered at address 0xA0. [ 22.263] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 1. [ 22.263] (--) CHROME(0): Probing for a VGA monitor on I2C Bus 2. [ 22.263] (II) CHROME(0): I2C device "I2C Bus 2:ddc2" registered at address 0xA0. [ 22.266] (--) CHROME(0): Did not detect a VGA monitor on I2C Bus 2. [ 22.266] (--) CHROME(0): Now perform manual detection of a VGA monitor. [ 22.266] (II) CHROME(0): EDID for output VGA-1 [ 22.266] (II) CHROME(0): Output VGA-1 disconnected [ 22.266] (WW) CHROME(0): No outputs definitely connected, trying again... [ 22.266] (II) CHROME(0): Output VGA-1 disconnected [ 22.266] (WW) CHROME(0): Unable to find connected outputs - setting 1024x768 initial framebuffer [ 22.266] (==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0) [ 22.266] (==) CHROME(0): DPI set to (96, 96) [ 22.266] (II) Loading sub module "fb" [ 22.266] (II) LoadModule: "fb" [ 22.266] (II) Loading /usr/lib/xorg/modules/libfb.so [ 22.275] (II) Module fb: vendor="X.Org Foundation" [ 22.275] compiled for 1.19.2, module version = 1.0.0 [ 22.275] ABI class: X.Org ANSI C Emulation, version 0.4 [ 22.275] (II) Loading sub module "exa" [ 22.275] (II) LoadModule: "exa" [ 22.275] (II) Loading /usr/lib/xorg/modules/libexa.so [ 22.276] (II) Module exa: vendor="X.Org Foundation" [ 22.276] compiled for 1.19.2, module version = 2.6.0 [ 22.277] ABI class: X.Org Video Driver, version 23.0 [ 22.277] (II) UnloadModule: "modesetting" [ 22.277] (II) Unloading modesetting [ 22.277] (II) UnloadModule: "fbdev" [ 22.277] (II) Unloading fbdev [ 22.277] (II) UnloadSubModule: "fbdevhw" [ 22.277] (II) Unloading fbdevhw [ 22.277] (II) UnloadModule: "vesa" [ 22.277] (II) Unloading vesa [ 22.277] (--) Depth 24 pixmap format is 32 bpp [ 22.277] (II) CHROME(0): VIAScreenInit [ 22.277] (II) CHROME(0): Frame Buffer From (0,0) To (1024,32767) [ 22.277] (II) CHROME(0): Using 31999 lines for offscreen memory. [ 22.277] 3145728 bytes of Linear memory allocated at 8000000, handle 27155512 [ 22.277] (II) CHROME(0): Entered umsAccelInit. [ 22.277] 262144 bytes of Linear memory allocated at 8300000, handle 27154448 [ 22.277] (II) CHROME(0): Initializing the 2D engine. [ 22.277] (II) CHROME(0): Initializing the 3D engine. [ 22.278] 32 bytes of Linear memory allocated at 8340000, handle 27154536 [ 22.278] 32 bytes of Linear memory allocated at 8340080, handle 27149752 [ 22.278] (II) CHROME(0): Exiting umsAccelInit. [ 22.285] (II) CHROME(0): - Visuals set up [ 22.285] (II) CHROME(0): - B & W [ 22.295] (**) CHROME(0): Option "MigrationHeuristic" "greedy" [ 22.295] (II) EXA(0): Offscreen pixmap area of 265289728 bytes [ 22.295] (II) EXA(0): Driver registered support for the following operations: [ 22.295] (II) Solid [ 22.295] (II) Copy [ 22.295] (II) Composite (RENDER acceleration) [ 22.295] (II) CHROME(0): [EXA] Enabled EXA acceleration. [ 22.295] (==) CHROME(0): Backing store enabled [ 22.295] (II) CHROME(0): - Backing store set up [ 22.296] (II) CHROME(0): - SW cursor set up [ 22.296] (II) CHROME(0): HWCursor ARGB enabled [ 22.296] 16384 bytes of Linear memory allocated at 8340100, handle 27187824 [ 22.296] 16384 bytes of Linear memory allocated at 8344100, handle 27187872 [ 22.296] (II) CHROME(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 22.301] (II) CHROME(0): - Def Color map set up [ 22.301] (II) CHROME(0): - Palette loaded [ 22.301] (II) CHROME(0): - Color maps etc. set up [ 22.301] (==) CHROME(0): DPMS enabled [ 22.302] (II) CHROME(0): - DPMS set up [ 22.302] (II) CHROME(0): VIAEnterVT [ 22.302] (II) CHROME(0): Entered iga1_crtc_save. [ 22.368] (II) CHROME(0): Entered viaIGA1Save. [ 22.368] (II) CHROME(0): Saving sequencer registers. [ 22.368] (II) CHROME(0): Finished saving sequencer registers. [ 22.368] (II) CHROME(0): Saving IGA1 registers. [ 22.368] (II) CHROME(0): Finished saving IGA1 registers. [ 22.368] (II) CHROME(0): Exiting viaIGA1Save. [ 22.368] (II) CHROME(0): Exiting iga1_crtc_save. [ 22.368] (II) CHROME(0): Entered iga2_crtc_save. [ 22.368] (II) CHROME(0): Entered viaIGA2Save. [ 22.368] (II) CHROME(0): Saving IGA2 registers. [ 22.368] (II) CHROME(0): Finished saving IGA2 registers. [ 22.368] (II) CHROME(0): Exiting viaIGA2Save. [ 22.368] (II) CHROME(0): Exiting iga2_crtc_save. [ 22.368] (II) CHROME(0): Entered via_analog_dpms. [ 22.368] (II) CHROME(0): Entered viaAnalogOutput. [ 22.368] (II) CHROME(0): Analog VGA Output: Off [ 22.368] (II) CHROME(0): Exiting viaAnalogOutput. [ 22.368] (II) CHROME(0): Exiting via_analog_dpms. [ 22.368] (II) CHROME(0): Entered iga1_crtc_dpms. [ 22.368] (II) CHROME(0): Entered viaIGA1DPMSControl. [ 22.368] (II) CHROME(0): Exiting viaIGA1DPMSControl. [ 22.368] (II) CHROME(0): Exiting iga1_crtc_dpms. [ 22.368] (II) CHROME(0): Entered iga2_crtc_dpms. [ 22.368] (II) CHROME(0): Entered viaIGA2DisplayOutput. [ 22.368] (II) CHROME(0): IGA2 Display Output: Off [ 22.368] (II) CHROME(0): Exiting viaIGA2DisplayOutput. [ 22.368] (II) CHROME(0): Exiting iga2_crtc_dpms. [ 22.368] (II) CHROME(0): Entered via_analog_dpms. [ 22.368] (II) CHROME(0): Entered viaAnalogOutput. [ 22.368] (II) CHROME(0): Analog VGA Output: Off [ 22.368] (II) CHROME(0): Exiting viaAnalogOutput. [ 22.368] (II) CHROME(0): Exiting via_analog_dpms. [ 22.368] (II) CHROME(0): Entered iga1_crtc_dpms. [ 22.368] (II) CHROME(0): Entered viaIGA1DPMSControl. [ 22.368] (II) CHROME(0): Exiting viaIGA1DPMSControl. [ 22.368] (II) CHROME(0): Exiting iga1_crtc_dpms. [ 22.368] (II) CHROME(0): Entered iga2_crtc_dpms. [ 22.368] (II) CHROME(0): Entered viaIGA2DisplayOutput. [ 22.369] (II) CHROME(0): IGA2 Display Output: Off [ 22.369] (II) CHROME(0): Exiting viaIGA2DisplayOutput. [ 22.369] (II) CHROME(0): Exiting iga2_crtc_dpms. [ 22.369] DRM memory allocation failed -6 [ 22.369] 635904 bytes of Linear memory allocated at 8348100, handle 27187960 [ 22.370] (II) CHROME(0): Benchmarking video copy. Less time is better. [ 22.372] (--) CHROME(0): Timed libc YUV420 copy... 418817. Throughput: 1983.1 MiB/s. [ 22.373] (--) CHROME(0): Timed kernel YUV420 copy... 381437. Throughput: 2177.5 MiB/s. [ 22.374] (--) CHROME(0): Timed SSE YUV420 copy... 264131. Throughput: 3144.5 MiB/s. [ 22.374] (--) CHROME(0): Timed MMX YUV420 copy... 272825. Throughput: 3044.3 MiB/s. [ 22.375] (--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU. [ 22.375] (--) CHROME(0): Timed MMX2 YUV420 copy... 215677. Throughput: 3851.0 MiB/s. [ 22.375] Freed 137658624 (pool 4) [ 22.375] (--) CHROME(0): Using MMX2 YUV42X copy for video. [ 22.382] (WW) CHROME(0): [XvMC] XvMC is not supported on this chipset. [ 22.382] (II) CHROME(0): - Done [ 22.382] (--) RandR disabled [ 22.402] (II) SELinux: Disabled on system [ 22.404] (II) AIGLX: Screen 0 is not DRI2 capable [ 22.404] (EE) AIGLX: reverting to software rendering [ 23.739] (II) IGLX: enabled GLX_MESA_copy_sub_buffer [ 23.742] (II) IGLX: Loaded and initialized swrast [ 23.742] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 24.243] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 24.243] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 24.243] (II) LoadModule: "libinput" [ 24.243] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 24.294] (II) Module libinput: vendor="X.Org Foundation" [ 24.295] compiled for 1.19.0, module version = 0.23.0 [ 24.295] Module class: X.Org XInput Driver [ 24.295] ABI class: X.Org XInput driver, version 24.1 [ 24.295] (II) Using input driver 'libinput' for 'Power Button' [ 24.295] (**) Power Button: always reports core events [ 24.295] (**) Option "Device" "/dev/input/event5" [ 24.302] (**) Option "_source" "server/udev" [ 24.304] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard [ 24.304] (II) input device 'Power Button', /dev/input/event5 is a keyboard [ 24.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5" [ 24.324] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 24.324] (**) Option "xkb_model" "pc105" [ 24.324] (**) Option "xkb_layout" "us" [ 24.325] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard [ 24.325] (II) input device 'Power Button', /dev/input/event5 is a keyboard [ 24.327] (II) config/udev: Adding input device Video Bus (/dev/input/event6) [ 24.327] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 24.327] (II) Using input driver 'libinput' for 'Video Bus' [ 24.327] (**) Video Bus: always reports core events [ 24.327] (**) Option "Device" "/dev/input/event6" [ 24.327] (**) Option "_source" "server/udev" [ 24.328] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard [ 24.328] (II) input device 'Video Bus', /dev/input/event6 is a keyboard [ 24.348] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event6" [ 24.348] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 24.348] (**) Option "xkb_model" "pc105" [ 24.348] (**) Option "xkb_layout" "us" [ 24.350] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard [ 24.350] (II) input device 'Video Bus', /dev/input/event6 is a keyboard [ 24.351] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 24.351] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 24.351] (II) Using input driver 'libinput' for 'Power Button' [ 24.351] (**) Power Button: always reports core events [ 24.351] (**) Option "Device" "/dev/input/event4" [ 24.351] (**) Option "_source" "server/udev" [ 24.353] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard [ 24.353] (II) input device 'Power Button', /dev/input/event4 is a keyboard [ 24.372] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4" [ 24.372] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 24.372] (**) Option "xkb_model" "pc105" [ 24.372] (**) Option "xkb_layout" "us" [ 24.373] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard [ 24.374] (II) input device 'Power Button', /dev/input/event4 is a keyboard [ 24.375] (II) config/udev: Adding input device Sleep Button (/dev/input/event3) [ 24.375] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 24.375] (II) Using input driver 'libinput' for 'Sleep Button' [ 24.375] (**) Sleep Button: always reports core events [ 24.375] (**) Option "Device" "/dev/input/event3" [ 24.375] (**) Option "_source" "server/udev" [ 24.376] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard [ 24.376] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard [ 24.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event3" [ 24.396] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 24.396] (**) Option "xkb_model" "pc105" [ 24.396] (**) Option "xkb_layout" "us" [ 24.397] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard [ 24.398] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard [ 24.399] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event7) [ 24.399] (II) No input driver specified, ignoring this device. [ 24.399] (II) This device may have been added with another device file. [ 24.401] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event0) [ 24.401] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall" [ 24.401] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600' [ 24.401] (**) Microsoft Wired Keyboard 600: always reports core events [ 24.401] (**) Option "Device" "/dev/input/event0" [ 24.401] (**) Option "_source" "server/udev" [ 24.403] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event0 is tagged by udev as: Keyboard [ 24.403] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event0 is a keyboard [ 24.436] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/0003:045E:07F8.0001/input/input3/event0" [ 24.436] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10) [ 24.436] (**) Option "xkb_model" "pc105" [ 24.436] (**) Option "xkb_layout" "us" [ 24.438] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event0 is tagged by udev as: Keyboard [ 24.438] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event0 is a keyboard [ 24.440] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event1) [ 24.440] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall" [ 24.440] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600' [ 24.441] (**) Microsoft Wired Keyboard 600: always reports core events [ 24.441] (**) Option "Device" "/dev/input/event1" [ 24.441] (**) Option "_source" "server/udev" [ 24.442] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is tagged by udev as: Keyboard [ 24.443] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is a keyboard [ 24.476] (II) libinput: Microsoft Wired Keyboard 600: needs a virtual subdevice [ 24.476] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.1/0003:045E:07F8.0002/input/input4/event1" [ 24.476] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: MOUSE, id 11) [ 24.476] (**) Option "AccelerationScheme" "none" [ 24.476] (**) Microsoft Wired Keyboard 600: (accel) selected scheme none/0 [ 24.476] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000 [ 24.477] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4 [ 24.478] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is tagged by udev as: Keyboard [ 24.479] (II) input device 'Microsoft Wired Keyboard 600', /dev/input/event1 is a keyboard [ 24.481] (II) config/udev: Adding input device Microsoft Microsoft IntelliMouse® Optical (/dev/input/event2) [ 24.481] (**) Microsoft Microsoft IntelliMouse® Optical: Applying InputClass "libinput pointer catchall" [ 24.481] (II) Using input driver 'libinput' for 'Microsoft Microsoft IntelliMouse® Optical' [ 24.481] (**) Microsoft Microsoft IntelliMouse® Optical: always reports core events [ 24.481] (**) Option "Device" "/dev/input/event2" [ 24.481] (**) Option "_source" "server/udev" [ 24.541] (II) input device 'Microsoft Microsoft IntelliMouse® Optical', /dev/input/event2 is tagged by udev as: Mouse [ 24.541] (II) input device 'Microsoft Microsoft IntelliMouse® Optical', /dev/input/event2 is a pointer caps [ 24.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/0003:045E:0039.0003/input/input5/event2" [ 24.572] (II) XINPUT: Adding extended input device "Microsoft Microsoft IntelliMouse® Optical" (type: MOUSE, id 12) [ 24.573] (**) Option "AccelerationScheme" "none" [ 24.573] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) selected scheme none/0 [ 24.573] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) acceleration factor: 2.000 [ 24.573] (**) Microsoft Microsoft IntelliMouse® Optical: (accel) acceleration threshold: 4 [ 24.633] (II) input device 'Microsoft Microsoft IntelliMouse® Optical', /dev/input/event2 is tagged by udev as: Mouse [ 24.633] (II) input device 'Microsoft Microsoft IntelliMouse® Optical', /dev/input/event2 is a pointer caps [ 24.635] (II) config/udev: Adding input device Microsoft Microsoft IntelliMouse® Optical (/dev/input/mouse0) [ 24.635] (II) No input driver specified, ignoring this device. [ 24.635] (II) This device may have been added with another device file. [ 24.636] (II) config/udev: Adding input device HDA VIA VT82xx Rear Mic (/dev/input/event9) [ 24.636] (II) No input driver specified, ignoring this device. [ 24.637] (II) This device may have been added with another device file. [ 24.638] (II) config/udev: Adding input device HDA VIA VT82xx Front Mic (/dev/input/event10) [ 24.638] (II) No input driver specified, ignoring this device. [ 24.638] (II) This device may have been added with another device file. [ 24.639] (II) config/udev: Adding input device HDA VIA VT82xx Line (/dev/input/event11) [ 24.639] (II) No input driver specified, ignoring this device. [ 24.639] (II) This device may have been added with another device file. [ 24.641] (II) config/udev: Adding input device HDA VIA VT82xx Line Out (/dev/input/event12) [ 24.641] (II) No input driver specified, ignoring this device. [ 24.641] (II) This device may have been added with another device file. [ 24.642] (II) config/udev: Adding input device HDA VIA VT82xx Front Headphone (/dev/input/event13) [ 24.642] (II) No input driver specified, ignoring this device. [ 24.642] (II) This device may have been added with another device file. [ 24.644] (II) config/udev: Adding input device PC Speaker (/dev/input/event8) [ 24.644] (II) No input driver specified, ignoring this device. [ 24.644] (II) This device may have been added with another device file. [ 24.656] (**) Microsoft Wired Keyboard 600: Applying InputClass "libinput keyboard catchall" [ 24.656] (II) Using input driver 'libinput' for 'Microsoft Wired Keyboard 600' [ 24.656] (**) Microsoft Wired Keyboard 600: always reports core events [ 24.656] (**) Option "Device" "/dev/input/event1" [ 24.656] (**) Option "_source" "_driver/libinput" [ 24.656] (II) libinput: Microsoft Wired Keyboard 600: is a virtual subdevice [ 24.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.1/0003:045E:07F8.0002/input/input4/event1" [ 24.656] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 13) [ 24.656] (**) Option "xkb_model" "pc105" [ 24.656] (**) Option "xkb_layout" "us" [ 69.432] (II) CHROME(0): VIALeaveVT [ 69.432] (II) CHROME(0): Entered iga1_crtc_restore. [ 69.443] (II) CHROME(0): Entered viaIGA1Restore. [ 69.443] (II) CHROME(0): Restoring sequencer registers. [ 69.443] (II) CHROME(0): Finished restoring sequencer registers. [ 69.443] (II) CHROME(0): Restoring IGA1 registers. [ 69.443] (II) CHROME(0): Finished restoring IGA1 registers. [ 69.443] (II) CHROME(0): Exiting viaIGA1Restore. [ 69.444] (II) CHROME(0): ViaDisablePrimaryFIFO [ 69.444] (II) CHROME(0): Exiting iga1_crtc_restore. [ 69.444] (II) CHROME(0): Entered iga2_crtc_restore. [ 69.444] (II) CHROME(0): Entered viaIGA2Restore. [ 69.444] (II) CHROME(0): Restoring IGA2 registers. [ 69.444] (II) CHROME(0): Finished restoring IGA2 registers. [ 69.444] (II) CHROME(0): Exiting viaIGA2Restore. [ 69.444] (II) CHROME(0): Exiting iga2_crtc_restore. [171897.506] (II) config/udev: removing device Microsoft Microsoft IntelliMouse® Optical [171897.911] (II) UnloadModule: "libinput"
Xorg.0.log.old
Description: application/trash
_______________________________________________ Openchrome-users mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/openchrome-users Main page: http://www.openchrome.org Wiki: http://www.openchrome.org/trac/wiki/TOC
