hello openchrome developers,
i found the HITACHI FLORA Se210(RK1) is not working openchrome driver yet.
http://www.hitachi.co.jp/Prod/comp/OSD/pc/flora/product/spc/florase210_rk1/
this notebook has laptop monitor(LCD) and external VGA.
error log on X.org, appears
[777960.462] (EE) CHROME(0): Unknown Card-Ids (3344|1043|13E2),
Chipset: VM800/P4M800Pro/VN800/CN700; please report to
[email protected]
so i wrote patch for via_id.c from current git, then working well on
this machine.
(i'm linux distribution developer, tested on next alpha version of
this. http://opencocon.org/ )
what more infomation need?
thanks,
SHIMADA Hirofumi
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
usb-storage 5-7:1.0: USB Mass Storage device detected
scsi2 : usb-storage 5-7:1.0
usbcore: registered new interface driver usb-storage
scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sda] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 4b 00 00 08
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk
aufs test_add:294:mount[186]: uid/gid/perm /mnt/union 0/0/0755, 0/0/01777
Linux agpgart interface v0.103
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:0c.0 (unregistered net_device): not PCI Express
r8169 0000:00:0c.0 eth0: RTL8169sc/8110sc at 0xcc910c00, 00:18:f3:98:3f:21, XID
18000000 IRQ 17
r8169 0000:00:0c.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming:
ok]
agpgart: Detected VIA VT3314 chipset
agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
cfg80211: Calling CRDA to update world regulatory domain
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input5
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3e0-0x3e7 0x3f0-0x3f7 0x400-0x41f 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
excluding 0x820-0x87f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xd3fff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
clean.
ACPI: Invalid active0 threshold
ACPI: Requesting acpi_cpufreq
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:06/LNXVIDEO:00/input/input6
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
Switching to clocksource acpi_pm
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (41 C)
ath5k 0000:00:09.0: registered as 'phy0'
asus_laptop: Asus Laptop Support version 0.42
asus_laptop: SE210 model detected
longhaul: Option "enable" not set. Aborting.
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input7
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC0] (on-line)
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x11a0b1, caps:
0xa04753/0x200000/0x0, board id: 3655, fw id: 183235
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
ath: EEPROM regdomain: 0x40
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: JP
ath: Regpair used: 0x40
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ath5k: phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
snd_via82xx 0000:00:11.5: setting latency timer to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
Adding 189436k swap on /dev/zram0. Priority:-1 extents:1 across:189436k SS
r8169 0000:00:0c.0 eth0: link down
r8169 0000:00:0c.0 eth0: link down
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:00:0c.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] Initialized drm 1.1.0 20060810
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[777960.007]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[777960.007] X Protocol Version 11, Revision 0
[777960.008] Build Operating System: Linux 3.2.0-4-amd64 x86_64
[777960.008] Current Operating System: Linux tiny 3.10.17 #1 Wed Nov 6 01:46:32 JST 2013 i686
[777960.008] Kernel command line: initrd=/crusoe-v8.gz root=/dev/ram0 ro ramdisk_size=4096 init=/sbin/linuxrc sqsfile=crusoe-v8.sqs BOOT_IMAGE=/bzImage-v8 debug
[777960.009] Build Date: 04 November 2013 04:36:53AM
[777960.010]
[777960.010] Current version of pixman: 0.30.2
[777960.011] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[777960.011] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[777960.013] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 6 17:03:49 2013
[777960.018] (==) Using config file: "/etc/X11/xorg.conf"
[777960.018] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[777960.026] (==) No Layout section. Using the first Screen section.
[777960.026] (==) No screen section available. Using defaults.
[777960.026] (**) |-->Screen "Default Screen Section" (0)
[777960.026] (**) | |-->Monitor "<default monitor>"
[777960.046] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[777960.046] (==) Automatically adding devices
[777960.046] (==) Automatically enabling devices
[777960.082] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[777960.082] Entry deleted from font path.
[777960.082] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[777960.082] Entry deleted from font path.
[777960.082] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[777960.082] Entry deleted from font path.
[777960.083] (==) FontPath set to:
/usr/share/fonts/X11/misc/,
/usr/share/fonts/X11/100dpi/,
/usr/share/fonts/X11/75dpi/
[777960.083] (==) ModulePath set to "/usr/lib/xorg/modules"
[777960.083] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[777960.083] (II) Loader magic: 0x821c8c0
[777960.083] (II) Module ABI versions:
[777960.083] X.Org ANSI C Emulation: 0.4
[777960.083] X.Org Video Driver: 12.1
[777960.083] X.Org XInput driver : 16.0
[777960.083] X.Org Server Extension : 6.0
[777960.087] (--) PCI:*(0:1:0:0) 1106:3344:1043:13e2 rev 1, Mem @ 0xe8000000/67108864, 0xfd000000/16777216, BIOS @ 0x????????/65536
[777960.088] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[777960.088] (II) LoadModule: "extmod"
[777960.096] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[777960.109] (II) Module extmod: vendor="X.Org Foundation"
[777960.109] compiled for 1.12.4, module version = 1.0.0
[777960.109] Module class: X.Org Server Extension
[777960.109] ABI class: X.Org Server Extension, version 6.0
[777960.110] (II) Loading extension MIT-SCREEN-SAVER
[777960.110] (II) Loading extension XFree86-VidModeExtension
[777960.110] (II) Loading extension XFree86-DGA
[777960.110] (II) Loading extension DPMS
[777960.110] (II) Loading extension XVideo
[777960.110] (II) Loading extension XVideo-MotionCompensation
[777960.110] (II) Loading extension X-Resource
[777960.110] (II) LoadModule: "dbe"
[777960.113] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[777960.127] (II) Module dbe: vendor="X.Org Foundation"
[777960.127] compiled for 1.12.4, module version = 1.0.0
[777960.127] Module class: X.Org Server Extension
[777960.127] ABI class: X.Org Server Extension, version 6.0
[777960.127] (II) Loading extension DOUBLE-BUFFER
[777960.127] (II) LoadModule: "glx"
[777960.130] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[777960.166] (II) Module glx: vendor="X.Org Foundation"
[777960.166] compiled for 1.12.4, module version = 1.0.0
[777960.167] ABI class: X.Org Server Extension, version 6.0
[777960.179] (==) AIGLX enabled
[777960.179] (II) Loading extension GLX
[777960.179] (II) LoadModule: "dri"
[777960.182] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[777960.199] (II) Module dri: vendor="X.Org Foundation"
[777960.200] compiled for 1.12.4, module version = 1.0.0
[777960.200] ABI class: X.Org Server Extension, version 6.0
[777960.200] (II) Loading extension XFree86-DRI
[777960.200] (II) LoadModule: "dri2"
[777960.203] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[777960.204] (II) Module dri2: vendor="X.Org Foundation"
[777960.204] compiled for 1.12.4, module version = 1.2.0
[777960.204] ABI class: X.Org Server Extension, version 6.0
[777960.204] (II) Loading extension DRI2
[777960.204] (==) Matched openchrome as autoconfigured driver 0
[777960.205] (==) Matched vesa as autoconfigured driver 1
[777960.205] (==) Matched fbdev as autoconfigured driver 2
[777960.205] (==) Assigned the driver to the xf86ConfigLayout
[777960.205] (II) LoadModule: "openchrome"
[777960.207] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[777960.244] (II) Module openchrome: vendor="http://openchrome.org/";
[777960.244] compiled for 1.12.4, module version = 0.3.3
[777960.245] Module class: X.Org Video Driver
[777960.245] ABI class: X.Org Video Driver, version 12.1
[777960.245] (II) LoadModule: "vesa"
[777960.247] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[777960.253] (II) Module vesa: vendor="X.Org Foundation"
[777960.253] compiled for 1.12.4, module version = 2.3.2
[777960.254] Module class: X.Org Video Driver
[777960.254] ABI class: X.Org Video Driver, version 12.1
[777960.254] (II) LoadModule: "fbdev"
[777960.255] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[777960.267] (II) Module fbdev: vendor="X.Org Foundation"
[777960.267] compiled for 1.12.4, module version = 0.4.3
[777960.267] Module class: X.Org Video Driver
[777960.267] ABI class: X.Org Video Driver, version 12.1
[777960.267] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, VM800/P4M800Pro/VN800/CN700,
CX700/VX700, K8M890/K8N890, P4M890, P4M900/VN896/CN896, VX800/VX820,
VX855/VX875, VX900
[777960.268] (II) VESA: driver for VESA chipsets: vesa
[777960.268] (II) FBDEV: driver for framebuffer: fbdev
[777960.268] (--) using VT number 3
[777960.286] (!!) VIA Technologies does not support this driver in any way.
[777960.286] (!!) For support, please refer to http://www.openchrome.org/.
[777960.286] (!!) (development build, branch (no_branch) at revision 0c17f81)
[777960.286] (WW) Falling back to old probe method for vesa
[777960.286] (WW) Falling back to old probe method for fbdev
[777960.287] (II) Loading sub module "fbdevhw"
[777960.287] (II) LoadModule: "fbdevhw"
[777960.294] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[777960.319] (II) Module fbdevhw: vendor="X.Org Foundation"
[777960.319] compiled for 1.12.4, module version = 0.0.2
[777960.319] ABI class: X.Org Video Driver, version 12.1
[777960.319] (EE) open /dev/fb0: No such file or directory
[777960.319] (II) CHROME(0): VIAPreInit
[777960.320] (II) CHROME(0): VIAGetRec
[777960.320] (--) CHROME(0): Chipset: VM800/P4M800Pro/VN800/CN700
[777960.321] (--) CHROME(0): Chipset revision: 0
[777960.321] drmOpenDevice: node name is /dev/dri/card0
[777960.329] drmOpenDevice: open result is -1, (No such device or address)
[777960.336] drmOpenDevice: open result is -1, (No such device or address)
[777960.337] drmOpenDevice: Open failed
[777960.433] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[777960.433] drmOpenDevice: node name is /dev/dri/card0
[777960.433] drmOpenDevice: open result is 10, (OK)
[777960.433] drmOpenByBusid: drmOpenMinor returns 10
[777960.434] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[777960.434] (II) [drm] KMS not enabled
[777960.434] (II) CHROME(0): [drm] via interface version: 2.11.1
[777960.434] (II) CHROME(0): DRI 1 api supported
[777960.435] (II) Loading sub module "vgahw"
[777960.435] (II) LoadModule: "vgahw"
[777960.440] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[777960.453] (II) Module vgahw: vendor="X.Org Foundation"
[777960.453] compiled for 1.12.4, module version = 0.1.0
[777960.453] ABI class: X.Org Video Driver, version 12.1
[777960.454] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[777960.454] (II) CHROME(0): VIAMapMMIO
[777960.454] (--) CHROME(0): mapping MMIO @ 0xfd000000 with size 0xd000
[777960.454] (--) CHROME(0): mapping BitBlt MMIO @ 0xfd200000 with size 0x200000
[777960.454] (II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[777960.455] (II) CHROME(0): VIAMapFB
[777960.455] (--) CHROME(0): mapping framebuffer @ 0xe8000000 with size 0x4000000
[777960.458] (--) CHROME(0): Frame buffer start: 0xb3140000, free start: 0x0 end: 0x4000000
[777960.458] (II) CHROME(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[777960.459] (==) CHROME(0): Depth 24, (--) framebuffer bpp 32
[777960.459] (==) CHROME(0): RGB weight 888
[777960.459] (==) CHROME(0): Default visual is TrueColor
[777960.459] (II) CHROME(0): VIASetupDefaultOptions - Setting up default chipset options.
[777960.459] (==) CHROME(0): Shadow framebuffer is disabled.
[777960.459] (==) CHROME(0): Hardware acceleration is enabled.
[777960.460] (==) CHROME(0): Using EXA acceleration architecture.
[777960.460] (==) CHROME(0): EXA composite acceleration enabled.
[777960.460] (==) CHROME(0): EXA scratch area size is 4096 kB.
[777960.460] (==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
[777960.460] (==) CHROME(0): GPU virtual command queue will be enabled.
[777960.460] (==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
[777960.460] (==) CHROME(0): AGP DMA will be enabled if DRI is enabled.
[777960.460] (==) CHROME(0): AGP DMA will be used for 2D acceleration.
[777960.460] (==) CHROME(0): PCI DMA will be used for XV image transfer if DRI is enabled.
[777960.461] (==) CHROME(0): Will not enable VBE modes.
[777960.461] (==) CHROME(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
[777960.461] (==) CHROME(0): Xv Bandwidth check is enabled.
[777960.461] (==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
[777960.461] (==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
[777960.461] (==) CHROME(0): TV dotCrawl is disabled.
[777960.461] (==) CHROME(0): TV deflicker is set to 0.
[777960.461] (==) CHROME(0): No default TV type is set.
[777960.461] (==) CHROME(0): No default TV output signal type is set.
[777960.461] (==) CHROME(0): No default TV output port is set.
[777960.462] (==) CHROME(0): Will not print VGA registers.
[777960.462] (==) CHROME(0): Will not scan I2C buses.
[777960.462] (II) CHROME(0): ...Finished parsing config file options.
[777960.462] (EE) CHROME(0): Unknown Card-Ids (3344|1043|13E2), Chipset: VM800/P4M800Pro/VN800/CN700; please report to [email protected]
[777960.462]
[777960.462] Backtrace:
# dmidecode 2.12
SMBIOS 2.4 present.
30 structures occupying 1115 bytes.
Table at 0x000FB810.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 202
Release Date: 11/13/2006
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
BIOS Revision: 2.2
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: HITACHI
Product Name: FLORA Se210 RK1
Version:
Serial Number: 340DX00315
UUID: 8C2C81DB-9FE2-4E24-7900-0018F3983F21
Wake-up Type: Power Switch
SKU Number:
Family:
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: HITACHI
Product Name: HTC2121
Version:
Serial Number: 340DX00315
Asset Tag:
Features:
Board is a hosting board
Board is replaceable
Location In Chassis:
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: HITACHI
Type: Notebook
Lock: Not Present
Version:
Serial Number: 340DX00315
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Other
Manufacturer: VIA
ID: A9 06 00 00 FF BB C9 A7
Version: VIA Esther processor 500MHz
Voltage: 0.8 V
External Clock: 100 MHz
Max Speed: 500 MHz
Current Speed: 500 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 64 kB
Maximum Size: 64 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Data
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: Other
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 1
Current Speed: Unknown
Type: Standard DIMM SDRAM
Installed Size: 256 MB (Single-bank Connection)
Enabled Size: 256 MB (Single-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1-TOUCH PAD
Internal Connector Type: Other
External Reference Designator:
External Connector Type: None
Port Type: Mouse Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1-Keyboard
Internal Connector Type: Other
External Reference Designator:
External Connector Type: None
Port Type: Keyboard Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Mic In
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6A1
Internal Connector Type: None
External Reference Designator: Audio Line Out
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN15
Internal Connector Type: None
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: CN05
Internal Connector Type: None
External Reference Designator: DB-15 pin female
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6J1 - SEC IDE
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0011, DMI type 9, 13 bytes
System Slot Information
Designation: PC CARD
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Short
ID: Adapter 1, Socket 0
Characteristics:
3.3 V is provided
Opening is shared
Cardbus is supported
Handle 0x0012, DMI type 9, 13 bytes
System Slot Information
Designation: Mini PCI
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Handle 0x0013, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: VGA controller
Handle 0x0014, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: Ethernet controller
Handle 0x0015, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Enabled
Description: Audio controller
Handle 0x0016, DMI type 10, 6 bytes
On Board Device Information
Type: Other
Status: Enabled
Description: TPM
Handle 0x0017, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Abbreviated
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0018, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 1
Handle 0x0019, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000C7FFFFF
Range Size: 200 MB
Physical Array Handle: 0x0018
Partition Width: 1
Handle 0x001A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0018
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 256 MB
Form Factor: SODIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x001B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0000C7FFFFF
Range Size: 200 MB
Physical Device Handle: 0x001A
Memory Array Mapped Address Handle: 0x0019
Partition Row Position: 1
Handle 0x001C, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x001D, DMI type 127, 4 bytes
End Of Table
$ lspci -m
00:00.0 "Class 0600" "1106" "0314" "1106" "0314"
00:00.1 "Class 0600" "1106" "1314" "1106" "1314"
00:00.2 "Class 0600" "1106" "2314" "1106" "2314"
00:00.3 "Class 0600" "1106" "3208" "0000" "0000"
00:00.4 "Class 0600" "1106" "4314" "1106" "4314"
00:00.7 "Class 0600" "1106" "7314" "1106" "7314"
00:01.0 "Class 0604" "1106" "b198" "0000" "0000"
00:09.0 "Class 0200" "168c" "001b" "185f" "1600"
00:10.0 "Class 0c03" "1106" "3038" "1043" "13e7"
00:10.1 "Class 0c03" "1106" "3038" "1043" "13e7"
00:10.2 "Class 0c03" "1106" "3038" "1043" "13e7"
00:10.3 "Class 0c03" "1106" "3038" "1043" "13e7"
00:10.4 "Class 0c03" "1106" "3104" "1043" "13e7"
00:11.0 "Class 0601" "1106" "3227" "1106" "3227"
00:11.5 "Class 0401" "1106" "3059" "1043" "13e3"
00:0a.0 "Class 0607" "1180" "0476" "1043" "13e7"
00:0c.0 "Class 0200" "10ec" "8167" "10ec" "8167"
00:0f.0 "Class 0101" "1106" "0571" "1106" "0571"
01:00.0 "Class 0300" "1106" "3344" "1043" "13e2"
diff --git a/src/via_id.c b/src/via_id.c
index fe88114..f3d3124 100644
--- a/src/via_id.c
+++ b/src/via_id.c
@@ -145,6 +145,7 @@ static struct ViaCardIdStruct ViaCardId[] = {
{"ECS C7VCM", VIA_VM800, 0x1019, 0xAA2D, VIA_DEVICE_CRT},
{"PCChips V21G", VIA_VM800, 0x1019, 0xAA51, VIA_DEVICE_CRT},
{"Hewlett Packard DX2020", VIA_VM800, 0x103C, 0x3027, VIA_DEVICE_CRT},
+ {"HITACHI FLORA Se210 RK1", VIA_VM800, 0x1043, 0x13E2, VIA_DEVICE_CRT | VIA_DEVICE_LCD},
{"Asustek P5VDC-MX", VIA_VM800, 0x1043, 0x3344, VIA_DEVICE_CRT},
{"Asustek P5VDC-TVM", VIA_VM800, 0x1043, 0x81CE, VIA_DEVICE_CRT},
{"Foxconn P4M800P7MB-RS2H", VIA_VM800, 0x105B, 0x0CF0, VIA_DEVICE_CRT},
_______________________________________________
Openchrome-users mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/openchrome-users
Main page: http://www.openchrome.org
Wiki: http://www.openchrome.org/trac/wiki/TOC
