Klaus Ziegler <[email protected]> writes:
Hi Klaus,
> after about 6 months of work, I'm very pleased to announce:
>
> OpenIndiana 2023.07 for SPARC
>
> this release is by far the best one I've ever done, it includes
> quite some bugfixes but also real new SPARC code changes.
> Nearly all of them, except a few ones done by myself have been
> done by Toomas Soome. I'm just the one who has brought them
> together, because I think it would be a shame if all that stuff will
> never hit the road.
Thank you and Toomas!
I gave the USB image a spin on my T4-4, but unfortunately it fails
at the same point as before:
--8<---------------cut here---------------start------------->8---
SPARC T4-4, No Keyboard
Copyright (c) 1998, 2018, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.38.16, 511.5000 GB memory available, Serial #101479496.
Ethernet address 0:10:e0:c:74:48, Host ID: 860c7448.
{0} ok show-disks
a) /reboot-memory@0
b) /pci@700/pci@1/pci@0/pci@0/LSI,sas@0/disk
c) /pci@500/pci@2/pci@0/pci@2/pci@0/pci@3/SUNW,emlxs@0,1/fp@0,0/disk
d) /pci@500/pci@2/pci@0/pci@2/pci@0/pci@3/SUNW,emlxs@0/fp@0,0/disk
e) /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk
f) /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/storage@1/disk
g) /pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk
h) /iscsi-hba/disk
q) NO SELECTION
Enter Selection, q to quit: f
/pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/storage@1/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/storage@1/disk
{0} ok boot /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/storage@1/disk -kdv
Boot device: /pci@400/pci@1/pci@0/pci@8/pci@0/usb@0,2/hub@2/storage@1/disk
File and args: -kdv
module /platform/sun4v/kernel/sparcv9/unix: text at [0x1000000, 0x10e1245] data
at 0x1800000
module /platform/sun4v/kernel/sparcv9/genunix: text at [0x10e1260, 0x12fb677]
data at 0x1936180
module /platform/sun4v/kernel/misc/sparcv9/platmod: text at [0x12fb680,
0x12fb687] data at 0x198b2a0
module /platform/sun4v/kernel/cpu/sparcv9/sun4v: text at [0x12fb6a0, 0x12fe13f]
data at 0x198b840
Loading kmdb...
module /platform/sun4v/kernel/misc/sparcv9/kmdbmod: text at [0x12fe180,
0x138d8bf] data at 0x19a4390
module /kernel/misc/sparcv9/ctf: text at [0x138d8c0, 0x1398287] data at
0x19deb78
\
Welcome to kmdb
kmdb: unable to determine terminal type: assuming `vt100'
Loaded modules: [ unix krtld genunix ]
[0]> :c
OpenIndiana Hipster 2023.07 Version illumos-dfa86c12af 64-bit
Ethernet address = 0:10:e0:c:74:48
ERROR: Last Trap: Fast Data Access MMU Miss
{0} ok
--8<---------------cut here---------------end--------------->8---
I have both CPU boards in the box, so I assume it would just boot
with one board as it used to do.
It's not super important, as my primary sparc will be a
T4-1. However I wanted to let you know about the status.
Best Regards,
Olaf
--
~ Olaf Bohlen - [email protected]
|~~ Het
/| \ Bruine
___/_|___\ Leven
\__n____/# DGCN2
_______________________________________________
oi-dev mailing list
[email protected]
https://openindiana.org/mailman/listinfo/oi-dev
