On Thu Oct 2, 2025 at 7:05 PM CEST, Jason Gunthorpe wrote: > On Thu, Oct 02, 2025 at 06:05:28PM +0200, Danilo Krummrich wrote: >> On Thu Oct 2, 2025 at 5:23 PM CEST, Jason Gunthorpe wrote: >> > This is not what I've been told, the VF driver has significant >> > programming model differences in the NVIDIA model, and supports >> > different commands. >> >> Ok, that means there are some more fundamental differences between the host >> PF >> and the "VM PF" code that we have to deal with. > > That was my understanding. > >> But that doesn't necessarily require that the VF parts of the host have to >> be in >> nova-core as well, i.e. with the information we have we can differentiate >> between PF, VF and PF in the VM (indicated by a device register). > > I'm not entirely sure what you mean by this.. > > The driver to operate the function in "vGPU" mode as indicated by the > register has to be in nova-core, since there is only one device ID.
Yes, the PF driver on the host and the PF (from VM perspective) driver in the VM have to be that same. But the VF driver on the host can still be a seaparate one. >> > If you look at the VFIO driver RFC it basically does no mediation, it >> > isn't intercepting MMIO - the guest sees the BARs directly. Most of >> > the code is "profiling" from what I can tell. Some config space >> > meddling. >> >> Sure, there is no mediation in that sense, but it needs quite some setup >> regardless, no? >> >> I thought there is a significant amount of semantics that is different >> between >> booting the PF and the VF on the host. > > I think it would be good to have Zhi clarify more of this, but from > what I understand are at least three activites comingled all together: > > 1) Boot the PF in "vGPU" mode so it can enable SRIOV Ok, this might be where the confusion above comes from. When I talk about nova-core in vGPU mode I mean nova-core running in the VM on the (from VM perspective) PF. But you seem to mean nova-core running on the host PF with vGPU on top? That of course has to be in nova-core. > 2) Enable SRIOV and profile VFs to allocate HW resources to them I think that's partially in nova-core and partially in vGPU; nova-core providing the abstraction of the corresponding firmware / hardware interfaces and vGPU controlling the semantics of the resource handling? This is what I thought vGPU has a secondary part for where it binds to nova-core through the auxiliary bus, i.e. vGPU consisting out of two drivers actually; the VFIO parts and a "per VF resource controller". > 3) VFIO variant driver to convert the VF into a "VM PF" with whatever > mediation and enhancement needed That should be vGPU only land.
