Many thanks for the response, Wesley. I know I am missing a trivial detail.
From the beginning, here are the relevant items from lspci:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02) #
this interface is currently working, configured DHCP, ultimately static,
local network
05:00.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 02) # this interface is currently not responding,
ultimately configured DHCP to whatever external network. Jiggery Pokery
required to use as gateway to "the big bad world."
[root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
link/ether e0:cb:4e:1f:35:b2 brd ff:ff:ff:ff:ff:ff
inet 192.168.222.152/24 brd 192.168.222.255 scope global dynamic enp2s0
valid_lft 5848sec preferred_lft 5848sec
inet6 fe80::e2cb:4eff:fe1f:35b2/64 scope link
valid_lft forever preferred_lft forever
[root@localhost ~]# nmcli -p d
=================================================
Status of devices
=================================================
DEVICE TYPE STATE CONNECTION
-------------------------------------------------
enp2s0 ethernet connected Wired connection 1
lo loopback unmanaged --
[root@localhost ~]# nmcli -p g
=============================================================
NetworkManager status
=============================================================
STATE CONNECTIVITY WIFI-HW WIFI WWAN-HW WWAN
-------------------------------------------------------------
connected full enabled enabled enabled enabled
No talkey to second NIC. Have tried more than one, thought to be good NICs.
Howard
On 11/01/2015 10:56 AM, Wesley Duffee-Braun wrote:
Oh and 'nmcli -p g'
On Sun, Nov 1, 2015 at 10:55 AM, Wesley Duffee-Braun <[email protected]
<mailto:[email protected]>> wrote:
Good morning ;)
When you say "address two NICs" do you mean assign static IP,
gateway, routes, etc to each NIC? What are your outputs for 'ip a'
and 'nmcli -p d' ?
On Sun, Nov 1, 2015 at 10:49 AM, Howard White <[email protected]
<mailto:[email protected]>> wrote:
Okay, I admit to being lazy. I am on the course of creating
some tools for phreakNIC next weekend. Like a fool, I have
chosen to use CentOS 7 as one platform in part as
self-education. I am having to learn more than I wish to just
to accomplish simple things.
Ergo - add a second NIC to CentOS 7 minimal. Server is going to
provide an Installfest private network with a firewall to the
(gasp) phreakNIC environment. Need two NICs. Have two NICs.
lspci sees two NICs. May I address two NICs with nmcli, nmtui
or ifconfig (yes, I added the net-tools package)??? Nooooooooo.
Is my google-foo good enough to find an example? By my
research, people only run CentOS 7 in VMware or VirtualBox. Really?
What gives?
Howard
--
--
You received this message because you are subscribed to the Google Groups
"NLUG" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/nlug-talk?hl=en
---
You received this message because you are subscribed to the Google Groups "NLUG" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
