Add ethtool operations of set_pauseram and get_pauseparm.
Signed-off-by: Woojung Huh <woojung....@microchip.com>
---
drivers/net/usb/lan78xx.c | 84 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 81 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 4ec25e8..6bcb312 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -36,7 +36,7 @@
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung....@microchip.com>"
#define DRIVER_DESC "LAN78XX USB 3.0 Gigabit Ethernet Devices"
#define DRIVER_NAME "lan78xx"
-#define DRIVER_VERSION "1.0.2"
+#define DRIVER_VERSION "1.0.3"
#define TX_TIMEOUT_JIFFIES (5 * HZ)
#define THROTTLE_JIFFIES (HZ / 8)
@@ -281,6 +281,10 @@ struct lan78xx_net {
u32 chipid;
u32 chiprev;
struct mii_bus *mdiobus;
+
+ int fc_autoneg;
+ u8 fc_autoneg_control;
+ u8 fc_request_control;
};
/* use ethtool to change the level for any given device */
@@ -902,11 +906,17 @@ static int lan78xx_update_flowcontrol(struct lan78xx_net
*dev, u8 duplex,
{
u32 flow = 0, fct_flow = 0;
int ret;
+ u8 cap;
- u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+ if (dev->fc_autoneg) {
+ cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+ dev->fc_autoneg_control = cap;
+ } else {
+ cap = dev->fc_request_control;
+ }
if (cap & FLOW_CTRL_TX)
- flow = (FLOW_CR_TX_FCEN_ | 0xFFFF);
+ flow |= (FLOW_CR_TX_FCEN_ | 0xFFFF);
if (cap & FLOW_CTRL_RX)
flow |= FLOW_CR_RX_FCEN_;
@@ -1386,6 +1396,70 @@ static int lan78xx_set_settings(struct net_device *net,
struct ethtool_cmd *cmd)
return ret;
}
+static void lan78xx_get_pause(struct net_device *net,
+ struct ethtool_pauseparam *pause)
+{
+ struct lan78xx_net *dev = netdev_priv(net);
+ struct phy_device *phydev = net->phydev;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+ phy_ethtool_gset(phydev, &ecmd);
+
+ pause->autoneg = dev->fc_autoneg;
+
+ if (dev->fc_autoneg) {
+ if (dev->fc_autoneg_control & FLOW_CTRL_TX)
+ pause->tx_pause = 1;
+
+ if (dev->fc_autoneg_control & FLOW_CTRL_RX)
+ pause->rx_pause = 1;
+ } else {
+ if (dev->fc_request_control & FLOW_CTRL_TX)
+ pause->tx_pause = 1;
+
+ if (dev->fc_request_control & FLOW_CTRL_RX)
+ pause->rx_pause = 1;
+ }
+}
+
+static int lan78xx_set_pause(struct net_device *net,
+ struct ethtool_pauseparam *pause)
+{
+ struct lan78xx_net *dev = netdev_priv(net);
+ struct phy_device *phydev = net->phydev;
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+ int ret;
+
+ phy_ethtool_gset(phydev, &ecmd);
+
+ if (pause->autoneg && !ecmd.autoneg) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ dev->fc_request_control = 0;
+ if (pause->rx_pause)
+ dev->fc_request_control |= FLOW_CTRL_RX;
+
+ if (pause->tx_pause)
+ dev->fc_request_control |= FLOW_CTRL_TX;
+
+ if (ecmd.autoneg) {
+ u32 mii_adv;
+
+ ecmd.advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+ mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
+ ecmd.advertising |= mii_adv_to_ethtool_adv_t(mii_adv);
+ phy_ethtool_sset(phydev, &ecmd);
+ }
+
+ dev->fc_autoneg = pause->autoneg;
+
+ ret = 0;
+exit:
+ return ret;
+}
+
static const struct ethtool_ops lan78xx_ethtool_ops = {
.get_link = lan78xx_get_link,
.nway_reset = lan78xx_nway_reset,
@@ -1404,6 +1478,8 @@ static const struct ethtool_ops lan78xx_ethtool_ops = {
.set_wol = lan78xx_set_wol,
.get_eee = lan78xx_get_eee,
.set_eee = lan78xx_set_eee,
+ .get_pauseparam = lan78xx_get_pause,
+ .set_pauseparam = lan78xx_set_pause,
};
static int lan78xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -1631,6 +1707,8 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
SUPPORTED_Pause | SUPPORTED_Asym_Pause);
genphy_config_aneg(phydev);
+ dev->fc_autoneg = phydev->autoneg;
+
phy_start(phydev);
netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
--
2.7.0
