The GENETv2 chipsets has MDIO interrupt like the GENETv3+ chipsets.
The previous commit d5c3d84657db ("net: phy: Avoid polling PHY with
PHY_IGNORE_INTERRUPTS") and commit 49f7a471e4d1 ("net: bcmgenet: Properly
configure PHY to ignore interrupt") cause link-down PHY always in some
40nm generation chipsets.
Signed-off-by: Jaedon Shin <jaedon.s...@gmail.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
drivers/net/ethernet/broadcom/genet/bcmgenet.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index b15a60d787c7..8e9aa8f6390d 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1904,7 +1904,7 @@ static int init_umac(struct bcmgenet_priv *priv)
bcmgenet_bp_mc_set(priv, reg);
}
- /* Enable MDIO interrupts on GENET v3+ */
+ /* Enable MDIO interrupts on GENET v2+ */
if (priv->hw_params->flags & GENET_HAS_MDIO_INTR)
int0_enable |= (UMAC_IRQ_MDIO_DONE | UMAC_IRQ_MDIO_ERROR);
@@ -3168,7 +3168,7 @@ static struct bcmgenet_hw_params bcmgenet_hw_params[] = {
.rdma_offset = 0x3000,
.tdma_offset = 0x4000,
.words_per_bd = 2,
- .flags = GENET_HAS_EXT,
+ .flags = GENET_HAS_EXT | GENET_HAS_MDIO_INTR,
},
[GENET_V3] = {
.tx_queues = 4,
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 967367557309..c14bfbfbe06a 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -310,7 +310,7 @@ struct bcmgenet_mib_counters {
#define UMAC_IRQ_TXDMA_BDONE (1 << 18)
#define UMAC_IRQ_TXDMA_DONE UMAC_IRQ_TXDMA_MBDONE
-/* Only valid for GENETv3+ */
+/* Only valid for GENETv2+ */
#define UMAC_IRQ_MDIO_DONE (1 << 23)
#define UMAC_IRQ_MDIO_ERROR (1 << 24)
--
2.7.1
